Javascript must be enabled to continue!

Corrosion of Tin and Tin Alloys

Abstract This article describes the allotropic modification and atmospheric corrosion of pure tin. Corrosion of pure tin due to oxidation reaction, and reaction with the other gases, water, acids, bases, and other liquid media, is discussed. The article provides information on corrosion behavior on soft solders, pewter, bearing alloys, tin-copper alloys, and tin-silver alloys. It reviews the influence of corrosion on immersion tin coating, tin-cadmium alloy coatings, tin-cobalt coatings, tin-copper coatings, tin-lead coatings, tin-nickel coatings, and tin-zinc coatings. The general properties and corrosion resistance of tinplate are summarized. The article also describes the methods of corrosion testing of coatings; these include an analysis of coating thickness measurements, porosity and rust resistance testing, solderability test, and specific special tests.

ASM International

Corrosion: Materials

2018

Title: Corrosion of Tin and Tin Alloys

Description:

Abstract This article describes the allotropic modification and atmospheric corrosion of pure tin.

Corrosion of pure tin due to oxidation reaction, and reaction with the other gases, water, acids, bases, and other liquid media, is discussed.

The article provides information on corrosion behavior on soft solders, pewter, bearing alloys, tin-copper alloys, and tin-silver alloys.

It reviews the influence of corrosion on immersion tin coating, tin-cadmium alloy coatings, tin-cobalt coatings, tin-copper coatings, tin-lead coatings, tin-nickel coatings, and tin-zinc coatings.

The general properties and corrosion resistance of tinplate are summarized.

The article also describes the methods of corrosion testing of coatings; these include an analysis of coating thickness measurements, porosity and rust resistance testing, solderability test, and specific special tests.

Back

Al alloys with their easy accessibility and good workability have been extensively used in oceanic engineering area [1]. However, corrosion failure of Al alloys is a major challeng...

Tin and Tin Alloys

Abstract Tin is a soft, brilliant white, low-melting metal that is most widely known and characterized in the form of coating. This article discusses the primary and...

High-Rate Dissolution of Corrosion Resistant Alloys in Nonaqueous Solutions at Room Temperature

Syntheses of pharmaceuticals often require a series of intermediate steps involving reactions in organic solvents. Some of these solutions can be aggressive towards the metallic ma...

Two-dimensional numerical analysis of differential concentration corrosion in seawater pipeline

Purpose The purpose of this paper is to develop a new two-dimensional differential concentration corrosion mathematical model based on the knowledge that oxygen distribution on the...

Evaluating Corrosion Inhibitors For Sour Gas Subsea Pipelines

Abstract Using subsea carbon steel pipelines to transport wet sour gas possesses huge challenges to the operators to maintain the high level of the Assets and Ope...

Metallography and Microstructures of Tin and Tin Alloys

Abstract This article describes the specimen preparation steps for tin and tin alloys, and for harder base metals which are coated with these materials with illustra...

Qualitative study on the corrosion behavior of Mg-Sn-Al-Zn alloys with different Sn contents by hot extrusion

Purpose This paper aims to fill the gap in knowledge regarding how Sn content and extrusion affect the corrosion behavior of Mg-xSn-2Al-1Zn alloys in a 3.5 wt.% N...

Investigation of the Localized Corrosion of Ni-Cr-Mo-W Alloy UNS N06022 in Aprotic Solvents at Room Temperature

Syntheses of pharmaceuticals often require a series of intermediate steps involving reactions in aprotic organic solvents. Some of these solutions can be aggressive towards the met...

Email:
Password:

Email:

Corrosion of Tin and Tin Alloys

Related Results