Javascript must be enabled to continue!
Suevite breccia from the Ries crater, Germany: Origin, cooling history and devitrification of impact glasses
View through CrossRef
Abstract— The distribution and petrography of surficial suevite breccias of the Ries impact crater in Southern Germany are reviewed, and the morphology, petrography and chemical composition of impact glasses in suevite breccias and their postdepositional devitrification is synthesized. Origin and thermal history of suevite breccia and suevite glasses are inferred from these data and from recent results of cooling and crystallization experiments with suevite glass melts under controlled conditions. In a montmorillonitic groundmass, the suevite breccia contains pieces of glass, up to some decimeters in size, and crystalline rock clasts of all stages of shock metamorphism. The glass particles originated in impact melt of basement gneisses and cooled by adiabatic pressure release from ∼80 GPa to atmospheric pressure during ejection from the crater. They were deposited on the ground together with the other suevite components at a temperature of ∼750 °C. Fractured glass pieces in the breccia show that during deposition of the suevite the temperature was below the temperature at which undercooled melt transforms to rigid glass. The suevite cooled after deposition mainly by convection of heat by emanating gases and vapors. In chilled layers at the base and at the top of suevite deposits, the glasses are preserved in vitreous state. Between these zones, the glasses were devitrified, yet crystallization of pyroxene, plagioclase and magnetite took place below the glass‐transformation temperature. Annealing experiments show that this unusual devitrification below the transformation temperature can be explained by the impact origin of suevite glasses. Due to rapid adiabatic cooling on decompression, the glasses were oversaturated with water and internally strained. Under these conditions, devitrification, especially the formation of plagioclase, was possible at temperatures below the transformation range. The origin from adiabatically cooled impact melt of deep‐seated rocks distinguishes water‐bearing suevite glasses from the Ries‐derived, water‐free moldavite tektites, which are interpreted as condensates of vaporized, surficial sediments (Engelhardt et al., 1987).
Title: Suevite breccia from the Ries crater, Germany: Origin, cooling history and devitrification of impact glasses
Description:
Abstract— The distribution and petrography of surficial suevite breccias of the Ries impact crater in Southern Germany are reviewed, and the morphology, petrography and chemical composition of impact glasses in suevite breccias and their postdepositional devitrification is synthesized.
Origin and thermal history of suevite breccia and suevite glasses are inferred from these data and from recent results of cooling and crystallization experiments with suevite glass melts under controlled conditions.
In a montmorillonitic groundmass, the suevite breccia contains pieces of glass, up to some decimeters in size, and crystalline rock clasts of all stages of shock metamorphism.
The glass particles originated in impact melt of basement gneisses and cooled by adiabatic pressure release from ∼80 GPa to atmospheric pressure during ejection from the crater.
They were deposited on the ground together with the other suevite components at a temperature of ∼750 °C.
Fractured glass pieces in the breccia show that during deposition of the suevite the temperature was below the temperature at which undercooled melt transforms to rigid glass.
The suevite cooled after deposition mainly by convection of heat by emanating gases and vapors.
In chilled layers at the base and at the top of suevite deposits, the glasses are preserved in vitreous state.
Between these zones, the glasses were devitrified, yet crystallization of pyroxene, plagioclase and magnetite took place below the glass‐transformation temperature.
Annealing experiments show that this unusual devitrification below the transformation temperature can be explained by the impact origin of suevite glasses.
Due to rapid adiabatic cooling on decompression, the glasses were oversaturated with water and internally strained.
Under these conditions, devitrification, especially the formation of plagioclase, was possible at temperatures below the transformation range.
The origin from adiabatically cooled impact melt of deep‐seated rocks distinguishes water‐bearing suevite glasses from the Ries‐derived, water‐free moldavite tektites, which are interpreted as condensates of vaporized, surficial sediments (Engelhardt et al.
, 1987).
Related Results
Ocean Resurge Deposits at the Rochechouart Impact Crater, France: Hints to Target Environment and Event Magnitude.
Ocean Resurge Deposits at the Rochechouart Impact Crater, France: Hints to Target Environment and Event Magnitude.
 Introduction: The Late Triassic Rochechouart impact structure, Massif Central, France, has been suggested to be one of the largest impact structures in western Europe. A ...
Multiple superposed inverted landforms on Mars
Multiple superposed inverted landforms on Mars
<p><strong>Introduction:</strong> Inverted landforms are positive relief and well-preserved features; typically, their formation instigate...
High‐Resolution Seismic Exploration of Xiuyan Impact Crater Structures
High‐Resolution Seismic Exploration of Xiuyan Impact Crater Structures
AbstractThe Xiuyan impact crater with a rim‐rim diameter of 1.8 km is located at northern hills in the Liaodong peninsula, Liaoning province, China, which is well reserved and conf...
Crater on Ganymede emplaced at the border of the dark and bright terrain – view into the subsurface properties
Crater on Ganymede emplaced at the border of the dark and bright terrain – view into the subsurface properties
Two major terrain units dominate Ganymede’s surface: 1) the ancient heavily cratered dark terrain and 2) the tectonically resurfaced bright or light terrain (Collins et a...
Refinement of the Lunar Production Function - The CSFD-Slope of Small Crater Diameters on Ejecta Blankets
Refinement of the Lunar Production Function - The CSFD-Slope of Small Crater Diameters on Ejecta Blankets
<p><strong>Introduction:</strong> The dating of geological surfaces on the Moon is crucial for understanding its geological history and ev...
Mapeo tridimensional del valor b en el Volcán Nevado del Ruíz, Colombia [3D mapping of b-value at Nevado del Ruiz Volcano, Colombia]
Mapeo tridimensional del valor b en el Volcán Nevado del Ruíz, Colombia [3D mapping of b-value at Nevado del Ruiz Volcano, Colombia]
Resumen Se realizó un mapeo tridimensional del valor-b para la sismicidad volcano-tectónica del Volcán Nevado del Ruiz (VNR) para el período comprendido entre 1985 y 2002.Se pudier...
Smart Glasses for Caring Situations in Complex Care Environments: Scoping Review
Smart Glasses for Caring Situations in Complex Care Environments: Scoping Review
Background
Anesthesia departments and intensive care units represent two advanced, high-tech, and complex care environments. Health care in those environments involves ...
Discovery of the Hailin impact crater in northeast
China
Discovery of the Hailin impact crater in northeast
China
A uniquely shaped impact structure, the Hailin impact crater, has been discovered in northeast China. The crater was formed on a granodiorite hillside and is an oval depression wit...

