Javascript must be enabled to continue!
Early time effects produced by neutral gas ionospheric chemical release
View through CrossRef
The artificial release of electron adsorbing material can cause electron density to be depleted in the ionosphere, forming the ionospheric holes rapidly. At the same time, the shell structure of the electron density enhancement around the hole is produced, owing to the extrusion of background plasma caused by rapid expansion of the release. The coexistence of ionospheric hole and enhancement structure is the significant characteristics of the early time effects. In this paper, the early time effects of neutral chemicals released into ionosphere are studied, and a physical model of spatiotemporal evolution about early time electron density is set up. At t=1 s, the maximum electron density in the enhanced region is 2.46106 cm-3, approximately 2.8 times as great as background electron density, then the electron density at the boundary gradually decreases. At t=30 s, the maximum electron density is 1.58106 cm-3, which is about 1.7 times the background electron density. At t=120 s the maximum electron density in the enhanced region is 1.12106 cm-3, which is 1.2 times the background electron density. Within 120 s after release, the size of the ionospheric cavity increases gradually; at t=5 s the distribution range of the released chemical material is of a sphere of about 10 km in diameter; at t=120 s the distribution diameter of the released chemical material is more than 70 km, and at the same time, the depletion depth of the ionospheric hole decreases slowly. At t=1 s, the depletion depth of the ionospheric hole is about 100%, and at t=120 s the depletion depth of the ionospheric cavity decreases to 95%. The effects of different-frequency radio waves propagating through ionospheric disturbance at t=10 s and t=120 s are simulated by the ray tracing. At t=10 s, the effect of electron density enhancement is remarkable, and the thickness of the enhancement is about 10 km, and the electronic density enhancement area can reflect the radio wave signal at a frequency as high as 14 MHz. At t=120 s, the phenomenon of electron density enhancement becomes weak, the thickness of the enhanced area continues to increase, and the radio wave signal that the electronic density enhancement area could reflect decreases to 11 MHz. The radio waves at a frequency range between 9 MHz and 12 MHz each have a complex diffraction, focusing and dispersing effect in the disturbed area. Furthermore, according to the working principle of ionospheric vertical measurement instrument and ray tracing theory, the vertical ionization detection figures are obtained through inversion. The results are consistent with previous experimental results of rocket exhaust, which testifies the correctness of proposed model.
Acta Physica Sinica, Chinese Physical Society and Institute of Physics, Chinese Academy of Sciences
Title: Early time effects produced by neutral gas ionospheric chemical release
Description:
The artificial release of electron adsorbing material can cause electron density to be depleted in the ionosphere, forming the ionospheric holes rapidly.
At the same time, the shell structure of the electron density enhancement around the hole is produced, owing to the extrusion of background plasma caused by rapid expansion of the release.
The coexistence of ionospheric hole and enhancement structure is the significant characteristics of the early time effects.
In this paper, the early time effects of neutral chemicals released into ionosphere are studied, and a physical model of spatiotemporal evolution about early time electron density is set up.
At t=1 s, the maximum electron density in the enhanced region is 2.
46106 cm-3, approximately 2.
8 times as great as background electron density, then the electron density at the boundary gradually decreases.
At t=30 s, the maximum electron density is 1.
58106 cm-3, which is about 1.
7 times the background electron density.
At t=120 s the maximum electron density in the enhanced region is 1.
12106 cm-3, which is 1.
2 times the background electron density.
Within 120 s after release, the size of the ionospheric cavity increases gradually; at t=5 s the distribution range of the released chemical material is of a sphere of about 10 km in diameter; at t=120 s the distribution diameter of the released chemical material is more than 70 km, and at the same time, the depletion depth of the ionospheric hole decreases slowly.
At t=1 s, the depletion depth of the ionospheric hole is about 100%, and at t=120 s the depletion depth of the ionospheric cavity decreases to 95%.
The effects of different-frequency radio waves propagating through ionospheric disturbance at t=10 s and t=120 s are simulated by the ray tracing.
At t=10 s, the effect of electron density enhancement is remarkable, and the thickness of the enhancement is about 10 km, and the electronic density enhancement area can reflect the radio wave signal at a frequency as high as 14 MHz.
At t=120 s, the phenomenon of electron density enhancement becomes weak, the thickness of the enhanced area continues to increase, and the radio wave signal that the electronic density enhancement area could reflect decreases to 11 MHz.
The radio waves at a frequency range between 9 MHz and 12 MHz each have a complex diffraction, focusing and dispersing effect in the disturbed area.
Furthermore, according to the working principle of ionospheric vertical measurement instrument and ray tracing theory, the vertical ionization detection figures are obtained through inversion.
The results are consistent with previous experimental results of rocket exhaust, which testifies the correctness of proposed model.
Related Results
Contributions to ionospheric electron density retrieval
Contributions to ionospheric electron density retrieval
La transformada de Abel es una técnica de inversión usada frecuentemente en radio ocultaciones (RO) que, en el contexto ionosférico, permite deducir densidades electrónicas a parti...
Critical Gas Saturation During Depressurisation and its Importance in the Brent Field
Critical Gas Saturation During Depressurisation and its Importance in the Brent Field
Critical Gas Saturation During Depressurisation and its Importance in the Brent Field.
Abstract
After some 20 years of pressure ...
Total electron content driven data products of SIMuRG
Total electron content driven data products of SIMuRG
<p>System for the Ionosphere Monitoring and Researching from GNSS (SIMuRG, see <em>https://simurg.iszf.irk.ru</em>) has been developed in ...
Comparisons of Pore Structure for Unconventional Tight Gas, Coalbed Methane and Shale Gas Reservoirs
Comparisons of Pore Structure for Unconventional Tight Gas, Coalbed Methane and Shale Gas Reservoirs
Extended abstract
Tight sands gas, coalbed methane and shale gas are three kinds of typical unconventional natural gas. With the decrease of conventional oil and gas...
Liquid Loading of Horizontal Gas Wells in Changbei Gas Field
Liquid Loading of Horizontal Gas Wells in Changbei Gas Field
The Changbei gas field, which initially exhibited high gas-production performance, is dominated by large-displacement horizontal wells. With the decrease in reservoir pressure, the...
Far-ultraviolet Ionospheric Photometer
Far-ultraviolet Ionospheric Photometer
<p>As a space-based optical remote sensing method, Far-ultraviolet Ionospheric Photometer with small size, low power consumption, high sensitivity is an important mea...
Non-spherical symmetric inversion of ionospheric occultation data
Non-spherical symmetric inversion of ionospheric occultation data
The Abel inversion based on a spherical symmetry of the ionospheric electron density distribution is a traditional inversion method of ionospheric occultation. However, the real io...
Unconventional Reservoirs: Basic Petrophysical Concepts for Shale Gas
Unconventional Reservoirs: Basic Petrophysical Concepts for Shale Gas
Abstract
Unconventional reservoirs have burst with considerable force in oil and gas production worldwide. Shale Gas is one of them, with intense activity taking pla...


