Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Moving to Automated Tree Inventory: Comparison of UAS-Derived Lidar and Photogrammetric Data with Manual Ground Estimates

View through CrossRef
Unmanned aircraft systems (UAS) have advanced rapidly enabling low-cost capture of high-resolution images with cameras, from which three-dimensional photogrammetric point clouds can be derived. More recently UAS equipped with laser scanners, or lidar, have been employed to create similar 3D datasets. While airborne lidar (originally from conventional aircraft) has been used effectively in forest systems for many years, the ability to obtain important tree features such as height, diameter at breast height, and crown dimensions is now becoming feasible for individual trees at reasonable costs thanks to UAS lidar. Getting to individual tree resolution is crucial for detailed phenotyping and genetic analyses. This study evaluates the quality of three three-dimensional datasets from three sensors—two cameras of different quality and one lidar sensor—collected over a managed, closed-canopy pine stand with different planting densities. For reference, a ground-based timber cruise of the same pine stand is also collected. This study then conducted three straightforward experiments to determine the quality of the three sensors’ datasets for use in automated forest inventory: manual mensuration of the point clouds to (1) detect trees and (2) measure tree heights, and (3) automated individual tree detection. The results demonstrate that, while both photogrammetric and lidar data are well-suited for single-tree forest inventory, the photogrammetric data from the higher-quality camera is sufficient for individual tree detection and height determination, but that lidar data is best. The automated tree detection algorithm used in the study performed well with the lidar data, detecting 98% of the 2199 trees in the pine stand, but fell short of manual mensuration within the lidar point cloud, where 100% of the trees were detected. The manually-mensurated heights in the lidar dataset correlated with field measurements at r = 0.95 with a bias of −0.25 m, where the photogrammetric datasets were again less accurate and precise.
Title: Moving to Automated Tree Inventory: Comparison of UAS-Derived Lidar and Photogrammetric Data with Manual Ground Estimates
Description:
Unmanned aircraft systems (UAS) have advanced rapidly enabling low-cost capture of high-resolution images with cameras, from which three-dimensional photogrammetric point clouds can be derived.
More recently UAS equipped with laser scanners, or lidar, have been employed to create similar 3D datasets.
While airborne lidar (originally from conventional aircraft) has been used effectively in forest systems for many years, the ability to obtain important tree features such as height, diameter at breast height, and crown dimensions is now becoming feasible for individual trees at reasonable costs thanks to UAS lidar.
Getting to individual tree resolution is crucial for detailed phenotyping and genetic analyses.
This study evaluates the quality of three three-dimensional datasets from three sensors—two cameras of different quality and one lidar sensor—collected over a managed, closed-canopy pine stand with different planting densities.
For reference, a ground-based timber cruise of the same pine stand is also collected.
This study then conducted three straightforward experiments to determine the quality of the three sensors’ datasets for use in automated forest inventory: manual mensuration of the point clouds to (1) detect trees and (2) measure tree heights, and (3) automated individual tree detection.
The results demonstrate that, while both photogrammetric and lidar data are well-suited for single-tree forest inventory, the photogrammetric data from the higher-quality camera is sufficient for individual tree detection and height determination, but that lidar data is best.
The automated tree detection algorithm used in the study performed well with the lidar data, detecting 98% of the 2199 trees in the pine stand, but fell short of manual mensuration within the lidar point cloud, where 100% of the trees were detected.
The manually-mensurated heights in the lidar dataset correlated with field measurements at r = 0.
95 with a bias of −0.
25 m, where the photogrammetric datasets were again less accurate and precise.

Related Results

Development of a multimodal imaging system based on LIDAR
Development of a multimodal imaging system based on LIDAR
(English) Perception of the environment is an essential requirement for the fields of autonomous vehicles and robotics, that claim for high amounts of data to make reliable decisio...
Automated Tree Crown Discrimination Using Three-Dimensional Shape Signatures Derived from LiDAR Point Clouds
Automated Tree Crown Discrimination Using Three-Dimensional Shape Signatures Derived from LiDAR Point Clouds
Discrimination of different tree crowns based on their 3D shapes is essential for a wide range of forestry applications, and, due to its complexity, is a significant challenge. Thi...
Terrain imperatives for Mini unmanned aircraft systems applications
Terrain imperatives for Mini unmanned aircraft systems applications
Purpose Amongst all classes of unmanned aircraft system (UAS), the rise of the Mini UAS class is the most dominant. Mini UASs are field-deployable systems and h...
Prysverlagings op voorraad met ’n dalende vraag
Prysverlagings op voorraad met ’n dalende vraag
The problem faced in this paper is a periodic pricing of inventory with obsolescence and an unknown time horizon. Typical inventory items with these properties are music CDs. The p...
PR-417-203902-R01 Remote Sensing and Leak Detection Platform That Can Deploy Multiple Sensor Types
PR-417-203902-R01 Remote Sensing and Leak Detection Platform That Can Deploy Multiple Sensor Types
The PRCI Project #417-203902 - ROW 3-1-A Final Report is attached for Member review and comment. The report includes a summary of all work completed in all Tasks which include: ...
Integration of Near-Proximal and Proximal Lidar Sensing for Fine-Resolution Forest Inventory
Integration of Near-Proximal and Proximal Lidar Sensing for Fine-Resolution Forest Inventory
Near-proximal and proximal light detection and ranging (lidar) systems are increasingly used for high-resolution forest inventory. Near-proximal lidar systems, such as those onboar...
The Feasibility of National Inference Under the NSCAW IV L-State Sample Design
The Feasibility of National Inference Under the NSCAW IV L-State Sample Design
The purpose of this Feasibility Analysis Study (FAS) was to evaluate methods for producing valid national estimates under the National Survey of Child and Adolescent Well-being (NS...

Back to Top