Javascript must be enabled to continue!
Blowout Fracture Complex Type
View through CrossRef
Functional problems and appearance may emerge if careful therapy is not applied in orbital fracture caused by maxillofacial trauma. Recently, the focus of fracture management on fragment fixation most possibly uses anatomy approach. The management of blowout fracture should be overcome by involving several departments. First, identification was carried out in emergency room and then it is consulted to occuloplasty and maxillofacial trauma surgeon. Multidisciplinary management will provide better outcome to retrieve face structural function and improve the appearance. We reported two cases of blowout fracture complex in Dr. Soetomo Hospital, Surabaya, Indonesia, done by Plastic Reconstruction Division of ORL-HNS Department in collaboration with Plastic Reconstruction Division of Ophthalmology Department. In the first case, a 64-year-old female was consulted by Plastic Reconstruction Division of Ophthalmology Department with diagnosis of right orbital adnexal injury, open eye globe injury, scleral laceration, and blowout fracture. In the second case, a 37-year-old male came to Plastic Reconstruction Division of ORL HNS Department, consulted by Plastic Reconstruction of Ophthalmology Department with diagnosis of left cornea and scleral laceration, left full thickness laceration palpebral at 1/3 nasal inferior, rupture of lacrimal canal, and blowout fracture. These cases of blowout fracture with rim orbita fracture complex type were managed well by Plastic Reconstruction Division of ORL-HNS and Plastic Reconstruction Division of Ophthalmology Department. It is apparent that multidisciplinary management was required for optimum outcome.
Title: Blowout Fracture Complex Type
Description:
Functional problems and appearance may emerge if careful therapy is not applied in orbital fracture caused by maxillofacial trauma.
Recently, the focus of fracture management on fragment fixation most possibly uses anatomy approach.
The management of blowout fracture should be overcome by involving several departments.
First, identification was carried out in emergency room and then it is consulted to occuloplasty and maxillofacial trauma surgeon.
Multidisciplinary management will provide better outcome to retrieve face structural function and improve the appearance.
We reported two cases of blowout fracture complex in Dr.
Soetomo Hospital, Surabaya, Indonesia, done by Plastic Reconstruction Division of ORL-HNS Department in collaboration with Plastic Reconstruction Division of Ophthalmology Department.
In the first case, a 64-year-old female was consulted by Plastic Reconstruction Division of Ophthalmology Department with diagnosis of right orbital adnexal injury, open eye globe injury, scleral laceration, and blowout fracture.
In the second case, a 37-year-old male came to Plastic Reconstruction Division of ORL HNS Department, consulted by Plastic Reconstruction of Ophthalmology Department with diagnosis of left cornea and scleral laceration, left full thickness laceration palpebral at 1/3 nasal inferior, rupture of lacrimal canal, and blowout fracture.
These cases of blowout fracture with rim orbita fracture complex type were managed well by Plastic Reconstruction Division of ORL-HNS and Plastic Reconstruction Division of Ophthalmology Department.
It is apparent that multidisciplinary management was required for optimum outcome.
Related Results
Underground Blowouts In Deep Well Drilling
Underground Blowouts In Deep Well Drilling
ABSTRACT
A kick occurs when the wellbore pressure becomes less than the formation pressure, and formation fluid enters the wellbore. When the flow of formation fl...
Analysis of Surface and Wellbore Hydraulics Provides Key to Efficient Blowout Control
Analysis of Surface and Wellbore Hydraulics Provides Key to Efficient Blowout Control
Abstract
Assessment of the blowout rate and composition is a key issue for decisions on the blowout control method, design of the kill operations, determination o...
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Fracture Modelling Using Seismic Based Fracture Intensity Volume, a Case Study in Middle East
Abstract
In this paper, a case study in a fractured carbonate reservoir is presented to demonstrate the approach of fracture modeling using fracture intensity vol...
Validation of Blowout Rate Calculations for Subsea Wells
Validation of Blowout Rate Calculations for Subsea Wells
Abstract
Calculating the blowout rate of oil and gas wells is commonly one of the first steps in environmental impact assessment, contingency planning and emergency ...
Quantifying the Sensitivity of Dielectric Dispersion Data to Fracture Properties in Fractured Rocks
Quantifying the Sensitivity of Dielectric Dispersion Data to Fracture Properties in Fractured Rocks
Evaluation of fluid storage and flow capacity of a fractured rock system needs a comprehensive characterization of all the fracture properties. These properties include the fractur...
Understanding Blowout Phenomena to the Induced Angle of V-Gutter-Stabilized Flames
Understanding Blowout Phenomena to the Induced Angle of V-Gutter-Stabilized Flames
AbstractThe combustion and flame blowout characteristics are investigated in a vitiated environment by placing the 60°, 90° and 120° V-gutters. The blowout is initiated through var...
Application of Lightning Breakdown Simulation in Inversion of Induced Fracture Network Morphology in Stimulated Reservoirs
Application of Lightning Breakdown Simulation in Inversion of Induced Fracture Network Morphology in Stimulated Reservoirs
Abstract
Accurately characterizing fracture network morphology is necessary for flow simulation and fracturing evaluation. The complex natural fractures and reservoi...
Connectivity Assessment and Permeability Upscaling of Fracture Network Using Grid Independent Particle Tracking Algorithm
Connectivity Assessment and Permeability Upscaling of Fracture Network Using Grid Independent Particle Tracking Algorithm
Abstract
Discrete Fracture Network (DFN) models are now becoming an industry practice to model fractures in naturally fractured reservoirs. However, incorporating th...

