Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Wavelength effect on striation formation during metal laser cutting
View through CrossRef
We develop a study on laser cutting of metals withassist gas jet, the aim is to investigate the effect of the beam wavelength on striation formation. The finite volume method is used to discretize the differential governing conservation equations, which are numerically solved. The interfaces are tracked by implementation of the VOF method, whereas an enthalpic approach allows to take into account the melting and re-solidification phenomena. The results show that the used wavelength may play a role in striation formation.
Title: Wavelength effect on striation formation during metal laser cutting
Description:
We develop a study on laser cutting of metals withassist gas jet, the aim is to investigate the effect of the beam wavelength on striation formation.
The finite volume method is used to discretize the differential governing conservation equations, which are numerically solved.
The interfaces are tracked by implementation of the VOF method, whereas an enthalpic approach allows to take into account the melting and re-solidification phenomena.
The results show that the used wavelength may play a role in striation formation.
Related Results
High brightness lasers in cutting applications
High brightness lasers in cutting applications
Laser cutting machines with linear motor drives provide high contour accuracy and high cutting rates. Thus laser beam cutting has become increasingly competitive compared to mechan...
Analytical modelling of cutting force in pulsed laser-assisted turnings of SiCp/Al composites
Analytical modelling of cutting force in pulsed laser-assisted turnings of SiCp/Al composites
Abstract
Particle-reinforced composites (SiCp/Al) are widely used in aerospace and military industries due to their excellent properties. Heating SiCp/Al with a pulsed lase...
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
Development of a high intensity Mid-Ir OPCPA pumped by a HO:YLF amplifier
The continuous development of laser sources delivering ultra-short light pulses underpins much of the current progress in experimental science, particularly in the domain of physic...
Striation Evidence in Counterfeiting Cases
Striation Evidence in Counterfeiting Cases
Abstract
There has been little information of recent vintage that deals with those unique striation mark identification criteria normally associated with paper cutti...
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
Comparative study of near-infrared pulsed laser machining of carbon fiber reinforced plastics
<p>Carbon fiber-reinforced plastics (CFRPs) have gained widespread popularity as a lightweight, high-strength alternative to traditional materials. The unique anisotropic pro...
Excimer Laser Micromachining of MEMS Materials
Excimer Laser Micromachining of MEMS Materials
Conventional photolithography-based microfabrication techniques are limited to two-dimensional fabrication and only particular materials can be used. Excimer laser micromachining e...
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
Double resonant sum-frequency generation in an external-cavity under high-efficiency frequency conversion
In recent years, more than 90% of the signal laser power can be up-converted based on the high-efficiency double resonant external cavity sum-frequency generation (SFG), especially...
Laser show safety for smaller shows: The ILDA category a laser show standard
Laser show safety for smaller shows: The ILDA category a laser show standard
The International Laser Display Association has developed a “Category A Standard” for laser shows that ILDA considers to be generally recognized as safe under the conditions of the...