Javascript must be enabled to continue!
Investigation of Superplastic Behavior of NiAI and Ni3Al Duplex Alloy
View through CrossRef
ABSTRACTThe superplastic behavior of a NiAI and Ni3Al duplex alloy was investigated. It was found that the alloy exhibits superplastic behavior over a narrow temperature range, from 975 °C to 1025°C at the strain rate of 1.52 × 10-4 s-1. A maximum tensile elongation of 149% was obtained at 1000°C with the strain rate sensitivity up to 0.375. The superplastic deformation of the duplex alloy can be approximately described by an empirical equation of the form: ε = Ao2.67 exp(-303,000 / RT). Optical microstructure and TEM observation show that the superplastic behavior mechanism of the investigated alloy is a process of continuous recovery and recrystallization during deformation.
Springer Science and Business Media LLC
Title: Investigation of Superplastic Behavior of NiAI and Ni3Al Duplex Alloy
Description:
ABSTRACTThe superplastic behavior of a NiAI and Ni3Al duplex alloy was investigated.
It was found that the alloy exhibits superplastic behavior over a narrow temperature range, from 975 °C to 1025°C at the strain rate of 1.
52 × 10-4 s-1.
A maximum tensile elongation of 149% was obtained at 1000°C with the strain rate sensitivity up to 0.
375.
The superplastic deformation of the duplex alloy can be approximately described by an empirical equation of the form: ε = Ao2.
67 exp(-303,000 / RT).
Optical microstructure and TEM observation show that the superplastic behavior mechanism of the investigated alloy is a process of continuous recovery and recrystallization during deformation.
Related Results
Joint Full-Duplex/Half-Duplex Transmission-Switching Scheduling and Transmission-Energy Allocation in Cognitive Radio Networks with Energy Harvesting
Joint Full-Duplex/Half-Duplex Transmission-Switching Scheduling and Transmission-Energy Allocation in Cognitive Radio Networks with Energy Harvesting
The full-duplex transmission protocol has been widely investigated in the literature in order to improve radio spectrum usage efficiency. Unfortunately, due to the effect of imperf...
Effect of Boron Content on Mechanical Properties of Monocrystalline Ni3Al
Effect of Boron Content on Mechanical Properties of Monocrystalline Ni3Al
ABSTRACTThe microstructure and the mechanical properties at room and high temperatures of monocrystalline Ni3Al containing 0, 0.52, 1.37, 2.22 and 3.00 at%B have been studied. The ...
In Vitro Comparative Study of Fretting-Corrosion Resistance of Ti6Al4V and Co28Cr6Mo in a Taper Joint Subjected to High Bending Moment
In Vitro Comparative Study of Fretting-Corrosion Resistance of Ti6Al4V and Co28Cr6Mo in a Taper Joint Subjected to High Bending Moment
Co alloy modular necks have been introduced in orthopaedics to address mechanical failure of the neck-stem junction (NSJ) observed in Ti alloy dual-modular hip stem. However, follo...
Alloying Effect on the Microstructure and Property of Single Crystal Ni3Al Alloys
Alloying Effect on the Microstructure and Property of Single Crystal Ni3Al Alloys
ABSTRACTThe alloying effects of Cr, Zr, Ta, Nb and B on the microstructure and properties of single crystal Ni3Al alloys have been studied. The strength of the alloys has been impr...
The Effect of Cerium on Superplasticity of AL-6CU-0.35 MG-0.2ZR Alloy
The Effect of Cerium on Superplasticity of AL-6CU-0.35 MG-0.2ZR Alloy
ABSTRACTThe effect of Cerium addition on the superplasticity of Al-6Cu-0.35Mg-O.2Zr alloy is investigated. The superplastic elongation of the alloy is increased from 450% to 500–70...
Comparison of Technological Properties of Sheet Titanium Alloys VT6 and VST2k
Comparison of Technological Properties of Sheet Titanium Alloys VT6 and VST2k
The manuscript considers microstructure, mechanical and processing properties (formability and solid state weldability) of sheet titanium alloy VT6(Ti-6Al-4V) with improved superpl...
Conformational dynamics of RNA
Conformational dynamics of RNA
Two projects are presented in this thesis, showcasing the application of PELDOR spectroscopy, and, more specifically, orientation-selective PELDOR spectroscopy to the study of the ...
Instrumentation and Control of a Bulge Test on a Superplastic Pb-Sn Alloy
Instrumentation and Control of a Bulge Test on a Superplastic Pb-Sn Alloy
Superplasticity is characterized by high elongations under a high strain rate sensibility, and it’s variation with strain rate, temperature and grain size. This parameter is often ...

