Javascript must be enabled to continue!
Modeling of Tire Cornering Properties with Experimental Modal Parameters <xref rid="FN1-1999-01-0784" ref-type="fn">*</xref>
View through CrossRef
<div class="section abstract"><div class="htmlview paragraph">The model of tire cornering properties with experimental modal parameters is proposed. By lateral modal parameters tire side force and self-aligning torque under different operating conditions are calculated and the trends of the calculated results qualitatively correspond with the experimental results of the references. Non-dimensional calculated results are compared with that of some empirical and semi-empirical models. Calculated side force, self-aligning torque and cornering stiffness under different loads can be easily fitted by widely used Magic Formula model and good results are achieved. The tire properties under different operating conditions can be calculated easily and the labored experimental works which is necessary by other methods of tire modeling can be released. Some tire basic properties, such as tire side deformation and distribution of side force, can be calculated while it can not be done by other methods.</div></div>
Title: Modeling of Tire Cornering Properties with Experimental Modal Parameters
<xref rid="FN1-1999-01-0784" ref-type="fn">*</xref>
Description:
<div class="section abstract"><div class="htmlview paragraph">The model of tire cornering properties with experimental modal parameters is proposed.
By lateral modal parameters tire side force and self-aligning torque under different operating conditions are calculated and the trends of the calculated results qualitatively correspond with the experimental results of the references.
Non-dimensional calculated results are compared with that of some empirical and semi-empirical models.
Calculated side force, self-aligning torque and cornering stiffness under different loads can be easily fitted by widely used Magic Formula model and good results are achieved.
The tire properties under different operating conditions can be calculated easily and the labored experimental works which is necessary by other methods of tire modeling can be released.
Some tire basic properties, such as tire side deformation and distribution of side force, can be calculated while it can not be done by other methods.
</div></div>.
Related Results
HYDRAULIC TUBE FITTINGS
HYDRAULIC TUBE FITTINGS
<div class="section abstract">
<div class="htmlview paragraph">This standard covers complete general and dimensional specifications for 37 deg flared and flareless typ...
The Effects of Spray, Mixing, and Combustion Model Parameters on KIVA-II Predictions
The Effects of Spray, Mixing, and Combustion Model Parameters on KIVA-II Predictions
<div class="htmlview paragraph">The combustion process in a diesel engine was simulated using KIVA-II, a multi-dimensional computer code. The original combustion model in KIV...
Compromise Between Sensing of Critical Cornering and Drift Control
Compromise Between Sensing of Critical Cornering and Drift Control
<div class="htmlview paragraph">To provide good vehicle control in critical cornering, it is important to be able to sense the point of critical cornering. Even if the point ...
Analytical Investigation of Tire Induced Particle Emissions
Analytical Investigation of Tire Induced Particle Emissions
Research and/or Engineering Question/Objective: The fine dust contribution (<10µm) of motor vehicles represents a considerable health risk for people in urban areas. Due to an i...
Revisiting near-threshold photoelectron interference in argon with a non-adiabatic semiclassical model
Revisiting near-threshold photoelectron interference in argon with a non-adiabatic semiclassical model
<sec> <b>Purpose:</b> The interaction of intense, ultrashort laser pulses with atoms gives rise to rich non-perturbative phenomena, which are encoded within th...
Development of a Characterization Method of Tire-Handling Dynamics Based on an Optical Measuring System
Development of a Characterization Method of Tire-Handling Dynamics Based on an Optical Measuring System
ABSTRACT
Tire force and moment (F&M) characteristics are important for the analysis and design of vehicle-handling dynamics and ride comfort. Compared with a general ti...
Semi-compatible mappings and common fixed point theorems of an implicit relation via inverse $ C- $class functions
Semi-compatible mappings and common fixed point theorems of an implicit relation via inverse $ C- $class functions
<abstract><p>In this paper, we prove some common fixed point theorems by exploring a new kind of generalized semi-compatibility and an implicit relation via inverse $ C...
Physical Understanding of Transient Generation of Tire Lateral Force and Aligning Torque
Physical Understanding of Transient Generation of Tire Lateral Force and Aligning Torque
ABSTRACT
Increasing vehicle performance requirements and virtualization of the development process require more understanding of the physical background of tire behavior, e...

