Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Removal of Cr(VI) from Wastewater Using Acrylonitrile Grafted Cellulose Extracted from Sugarcane Bagasse

View through CrossRef
A highly efficient low-cost adsorbent was prepared using raw and chemically modified cellulose isolated from sugarcane bagasse for decontamination of Cr(VI) from wastewater. First, cellulose pulp was isolated from sugarcane bagasse by subjecting it to acid hydrolysis, alkaline hydrolysis and bleaching with sodium chlorate (NaClO3). Then, the bleached cellulose pulp was chemically modified with acrylonitrile monomer in the presence Fenton’s reagent (Fe+2/H2O2) to carry out grafting of acrylonitrile onto cellulose by atom transfer radical polymerization. The developed adsorbent (acrylonitrile grafted cellulose) was analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). Both raw cellulose and acrylonitrile grafted cellulose were used for chromium removal from wastewater. The effects of metal ion concentration, pH, adsorbent dose and time were studied, and their values were optimized. The optimum conditions for the adsorption of Cr(VI) onto raw and chemically modified cellulose were: metal ion concentration: 50 ppm, adsorbent dose: 1 g, pH: 6, and time: 60 min. The maximum efficiencies of 73% and 94% and adsorption capacities of 125.95 mg/g and 267.93 mg/g were achieved for raw and acrylonitrile grafted cellulose, respectively. High removal efficiency was achieved, owing to high surface area of 79.92 m2/g and functional active binding cites on grafted cellulose. Isotherm and kinetics studies show that the experimental data were fully fitted by the Freundlich isotherm model and pseudo first-order model. The adsorbent (acrylonitrile grafted cellulose) was regenerated using three different types of regenerating reagents and reused thirty times, and there was negligible decrease (19%) in removal efficiency after using it for 30 times. Hence, it is anticipated that acrylonitrile could be utilized as potential candidate material for commercial scale Cr(VI) removal from wastewater.
Title: Removal of Cr(VI) from Wastewater Using Acrylonitrile Grafted Cellulose Extracted from Sugarcane Bagasse
Description:
A highly efficient low-cost adsorbent was prepared using raw and chemically modified cellulose isolated from sugarcane bagasse for decontamination of Cr(VI) from wastewater.
First, cellulose pulp was isolated from sugarcane bagasse by subjecting it to acid hydrolysis, alkaline hydrolysis and bleaching with sodium chlorate (NaClO3).
Then, the bleached cellulose pulp was chemically modified with acrylonitrile monomer in the presence Fenton’s reagent (Fe+2/H2O2) to carry out grafting of acrylonitrile onto cellulose by atom transfer radical polymerization.
The developed adsorbent (acrylonitrile grafted cellulose) was analyzed by X-ray diffraction analysis (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR).
Both raw cellulose and acrylonitrile grafted cellulose were used for chromium removal from wastewater.
The effects of metal ion concentration, pH, adsorbent dose and time were studied, and their values were optimized.
The optimum conditions for the adsorption of Cr(VI) onto raw and chemically modified cellulose were: metal ion concentration: 50 ppm, adsorbent dose: 1 g, pH: 6, and time: 60 min.
The maximum efficiencies of 73% and 94% and adsorption capacities of 125.
95 mg/g and 267.
93 mg/g were achieved for raw and acrylonitrile grafted cellulose, respectively.
High removal efficiency was achieved, owing to high surface area of 79.
92 m2/g and functional active binding cites on grafted cellulose.
Isotherm and kinetics studies show that the experimental data were fully fitted by the Freundlich isotherm model and pseudo first-order model.
The adsorbent (acrylonitrile grafted cellulose) was regenerated using three different types of regenerating reagents and reused thirty times, and there was negligible decrease (19%) in removal efficiency after using it for 30 times.
Hence, it is anticipated that acrylonitrile could be utilized as potential candidate material for commercial scale Cr(VI) removal from wastewater.

Related Results

Hydatid Disease of The Brain Parenchyma: A Systematic Review
Hydatid Disease of The Brain Parenchyma: A Systematic Review
Abstarct Introduction Isolated brain hydatid disease (BHD) is an extremely rare form of echinococcosis. A prompt and timely diagnosis is a crucial step in disease management. This ...
The catalytic kinetics and cfd simulation of multi-stage combined removal of acrylonitrile tail gas
The catalytic kinetics and cfd simulation of multi-stage combined removal of acrylonitrile tail gas
There is no kinetic data and rate equation that can be used directly for catalytic combustion of acrylonitrile tail gas, which leads to the multi-stage combined catalytic kinetic m...
Effect of partial cement replacement with sugarcane bagasse ash
Effect of partial cement replacement with sugarcane bagasse ash
Research into mixing and replacing the component ingredients of concrete has become necessary since there is a widespread need in most parts of the globe for more affordable housin...
Grafting of acrylonitrile on cellulose xanthate
Grafting of acrylonitrile on cellulose xanthate
AbstractA study has been made of the grafting of acrylonitrile onto a bleached kraft pulp by application of the xanthate method developed by Faessinger and Conte. Acrylonitrile was...
Biosorption potential of natural, pyrolysed and acid-assisted pyrolysed sugarcane bagasse for the removal of lead from contaminated water
Biosorption potential of natural, pyrolysed and acid-assisted pyrolysed sugarcane bagasse for the removal of lead from contaminated water
Lead (Pb) is a ubiquitous pollutant which poses serious threats to plants, animals and humans once entered into the food chain via contaminated industrial effluents on their discha...
BIODEGRADABLE COMPOSITES OF SUGARCANE BAGASSE AND VEGETAL POLYURETHANE FOR BIOMEDICAL APPLICATIONS
BIODEGRADABLE COMPOSITES OF SUGARCANE BAGASSE AND VEGETAL POLYURETHANE FOR BIOMEDICAL APPLICATIONS
Due to the environmental problems caused by polymers, it is desirable to use biodegradable biopolymers such as vegetable polyurethane and sugar cane bagasse fibers. Therefore, the ...
Catalytic Conversion of Sugarcane Bagasse into 5-Hydroxymethylfurfural
Catalytic Conversion of Sugarcane Bagasse into 5-Hydroxymethylfurfural
Furan derivatives especially 5-Hydroxymethylfurfural has recently been regarded as one important precursor for the production of biofuels and biobased compounds. Aims: The ai...

Back to Top