Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
VERIFICATION OF THE TORQUE GAUGES
View through CrossRef
The article deals with the methodology of verification of mechanical and electronic torque gauges. Legislative metrological requirements are set for these gauges and the verification process for these types of gauges is also set. The working standard is used to verify two selected torque gauges and then the suitability of these gauges is assessed. Measurement uncertainties are identified to determine the reliability of the measurement process.
Title: VERIFICATION OF THE TORQUE GAUGES
Description:
The article deals with the methodology of verification of mechanical and electronic torque gauges.
Legislative metrological requirements are set for these gauges and the verification process for these types of gauges is also set.
The working standard is used to verify two selected torque gauges and then the suitability of these gauges is assessed.
Measurement uncertainties are identified to determine the reliability of the measurement process.
Related Results
Improvement of Based Sector and Comparison Speed and Electromagnetic Torque of Direct Torque Control
Improvement of Based Sector and Comparison Speed and Electromagnetic Torque of Direct Torque Control
Direct torque control is one type of vector control used to operate an induction motor. Efficient control rules for induction motor drives offer a great chance to save energy. In c...
Shenzi 16-Inch Oil Export SCR CVA Verification
Shenzi 16-Inch Oil Export SCR CVA Verification
Abstract
In 2006 Enterprise developed a 16-inch oil export system from Shenzi field located in Green Canyon Block 653 in the Gulf of Mexico, approximately 120 nau...
Research on Calculation Method of Characteristic Torque of Prestressed UHPC-RC I-Shaped Composite Beam
Research on Calculation Method of Characteristic Torque of Prestressed UHPC-RC I-Shaped Composite Beam
The prestressed UHPC-RC I-shaped composite beam is a common new type of beam structure at present, and there is relatively little research on the torsional calculation method for t...
Torque and Drag Software Analysis for Deciding Well Construction and Remedial Action
Torque and Drag Software Analysis for Deciding Well Construction and Remedial Action
Abstract
In assam in India sidetrack well was decided to do horizontally after side tracking in l profile and after 90horizontal section. Original well was S prof...
Platform Verification - Aview From Amember Of Industry
Platform Verification - Aview From Amember Of Industry
ABSTRACT
Concerns have been raised in many sectors regarding the safety and reliability of offshore platforms. In this paper, the history of offshore operations a...
Effect of torque ratio on speed regulating start
Effect of torque ratio on speed regulating start
Purpose
Friction pairs of the hydro-viscous drive speed regulating start device should be designed based on the rated torque. To obtain design basis of the rated torque of the hydr...
Double-Loop Control for Torque Tracking of Dry Clutch
Double-Loop Control for Torque Tracking of Dry Clutch
Torque tracking is an important control target of a dry clutch. At present, the torque tracking control method of a dry clutch generally uses the relationship between the clutch to...
Innovative Rigless Well Test Solution with Powered Sub-Surface Shut-In Wireless Telemetry System to Enhance Dynamic Reservoir Characterization Cost-Effectively
Innovative Rigless Well Test Solution with Powered Sub-Surface Shut-In Wireless Telemetry System to Enhance Dynamic Reservoir Characterization Cost-Effectively
Abstract
A key part of dynamic reservoir characterization is pressure transient analysis, which is essential in understanding near wellbore and far field formation p...