Javascript must be enabled to continue!
Preferences of Coptotermes formosanus Shiraki and Coptotermes gestroi (Wasmann) (Blattodea: Rhinotermitidae) among Three Commercial Wood Species
View through CrossRef
The Formosan subterranean termite, Coptotermes formosanus Shiraki, and the Asian subterranean termite, Coptotermes gestroi (Wasmann), are both pests of wood in service in Hawaii and Florida. We conducted a laboratory study using method modified from those described in standard E1-09 of the American Wood Protection Association (AWPA 2009) to assess the termite resistance of three commercially available wood species used in regions of the USA where both termite species occur: Douglas fir, Pseudotsuga menziessii, southern yellow pine, Pinus spp. and redwood, Sequoia sempervirens. A multiple-choice (three-choice) assay was used for four weeks (28 days) in order to simulate field conditions of food choice and assess termite feeding preferences under 28 °C and 72–80% RH. 400 termites (360 workers: 40 soldiers) were released into each test jar. Five replicates and two controls of each wood species were used with each termite species. Termite mortality was recorded at the end of the test; and wood wafers were oven-dried and weighed before and after termite exposure to determine the mass loss due to termite feeding, and rated visually on a 0 (failure) to 10 (sound) scale. There were significant differences in mean mass loss values among the three wood species and between two termite species. The mean mass loss value for redwood was significantly lower than Douglas fir and southern yellow pine with both termite species. However, C. formosanus showed increased feeding on Douglas fir and southern yellow pine compared to C. gestroi.
Title: Preferences of Coptotermes formosanus Shiraki and Coptotermes gestroi (Wasmann) (Blattodea: Rhinotermitidae) among Three Commercial Wood Species
Description:
The Formosan subterranean termite, Coptotermes formosanus Shiraki, and the Asian subterranean termite, Coptotermes gestroi (Wasmann), are both pests of wood in service in Hawaii and Florida.
We conducted a laboratory study using method modified from those described in standard E1-09 of the American Wood Protection Association (AWPA 2009) to assess the termite resistance of three commercially available wood species used in regions of the USA where both termite species occur: Douglas fir, Pseudotsuga menziessii, southern yellow pine, Pinus spp.
and redwood, Sequoia sempervirens.
A multiple-choice (three-choice) assay was used for four weeks (28 days) in order to simulate field conditions of food choice and assess termite feeding preferences under 28 °C and 72–80% RH.
400 termites (360 workers: 40 soldiers) were released into each test jar.
Five replicates and two controls of each wood species were used with each termite species.
Termite mortality was recorded at the end of the test; and wood wafers were oven-dried and weighed before and after termite exposure to determine the mass loss due to termite feeding, and rated visually on a 0 (failure) to 10 (sound) scale.
There were significant differences in mean mass loss values among the three wood species and between two termite species.
The mean mass loss value for redwood was significantly lower than Douglas fir and southern yellow pine with both termite species.
However, C.
formosanus showed increased feeding on Douglas fir and southern yellow pine compared to C.
gestroi.
Related Results
Extraction of Bioactive Component from Herbal Anoectochilus formosanus Hayata by Microwave, Ultrasound and Lactic Fermentation
Extraction of Bioactive Component from Herbal Anoectochilus formosanus Hayata by Microwave, Ultrasound and Lactic Fermentation
Anoectochilus formosanus Hayata was demonstrated to have a benefit healthy due to containing active pharmaceutical ingredients. However, A. formosanus is usually processed to produ...
Evaluation of changes in the growth and chemical constituents of Anoectochilus formosanus Hayata grown under hydroponic conditions
Evaluation of changes in the growth and chemical constituents of Anoectochilus formosanus Hayata grown under hydroponic conditions
<I>Anoectochilus formosanus</i> Hayata is an important medicinal plant with various pharmaceutical properties. In this study, <I>A. formosanus</i> plants we...
Jenis Serangga Hama Pada Tanaman Cengkeh (Syzygium aromaticum) di Desa Salumpaga Kecamatan Tolitoli Utara Kabupaten Tolitoli
Jenis Serangga Hama Pada Tanaman Cengkeh (Syzygium aromaticum) di Desa Salumpaga Kecamatan Tolitoli Utara Kabupaten Tolitoli
Cloves (Syzygium aromaticum) are native to Indonesia which have high social and economic value, however cloves also have different types of pests. The latest information on insect ...
A New Record of Termite <i>Coptotermes emersoni</i> Ahmed
A New Record of Termite <i>Coptotermes emersoni</i> Ahmed
The Coptotermes Wasmann (1896), is a highly scattered genus, which is represented by nine species. Coptotermes emersoni Ahmad (Isoptera: Rhinotermitidae: Coptotermitinae) is a spec...
DIVERSITY AND DISTRIBUTION OF TERMITES (BLATTODEA: ISOPTERA) IN BHIWANI, HARYANA, INDIA
DIVERSITY AND DISTRIBUTION OF TERMITES (BLATTODEA: ISOPTERA) IN BHIWANI, HARYANA, INDIA
A comprehensive study was undertaken by collecting 51 samples of termites between July and October 2021 in three distinct zones within the Bhiwani district to analyze the termite d...
Termite Resistant Properties of Sisal Fiberboards
Termite Resistant Properties of Sisal Fiberboards
A study was carried out to test sisal (Agave sisalana Perrine) fiberboards properties as building materials against Asian subterranean termite, Coptotermes gestroi (Wasmann). Evalu...
Impacts of man-made structures on marine biodiversity and species status - native & non-native species
Impacts of man-made structures on marine biodiversity and species status - native & non-native species
<p>Coastal environments are exposed to anthropogenic activities such as frequent marine traffic and restructuring, i.e., addition, removal or replacing with man-made structur...
Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets
Properties of Wood–Plastic Composites Manufactured from Two Different Wood Feedstocks: Wood Flour and Wood Pellets
Driven by the motive of minimizing the transportation costs of raw materials to manufacture wood–plastic composites (WPCs), Part I and the current Part II of this paper series expl...

