Javascript must be enabled to continue!
Ore genesis of the Xiyi Pb‐Zn deposit, western Yunnan province, China: Geologic, fluid inclusion, and isotopic (C‐H‐O‐S‐Pb) evidence
View through CrossRef
The Xiyi Pb‐Zn deposit, located in the Baoshan Block of the Sanjiang region in western Yunnan, China, contains 1.2 Mt of Pb‐Zn resources. The orebodies are hosted by Devonian‐Carboniferous limestone, structurally controlled by the NE‐trending fractures, and occur in stratiform, vein, and lenticular forms. The mineral assemblage of the ores includes sphalerite, galena, pyrite, arsenopyrite, chalcopyrite, and marcasite. Calcite, barite, and quartz occur as gangue minerals. Three stages of hydrothermal mineralization are recognized based on the ore textures, crosscutting relationship, and mineral assemblages: an early stage of sphalerite + galena + calcite (Stage 1), a middle stage of galena + arsenopyrite + calcite ± sphalerite (Stage 2), and a late stage of calcite + pyrite ± barite ± quartz (Stage 3). Two types of fluid inclusions are associated with the different ore‐forming hydrothermal stages: aqueous inclusions and hydrocarbon‐H2O inclusions. The ore‐forming fluids were characterized by low temperatures (100 ~ 200 °C), medium salinities (8 ~ 20 wt% NaCleq), and medium densities (1.0 ~ 1.1 g/cm3) and contained minor amounts of CH4. The δDH2O and calculated δ18OH2O values of the Stage 1 calcite range from −89‰ to −103‰ and from 1.5‰ to 5.5‰, respectively, indicating that the H2O in the hydrothermal fluids was derived from seawater that had reacted with organic matter. The δ13CPDB and δ18OSMOW values of the calcite associated with Stages 1 and 3 range from −5.2‰ to 3.2‰ and from 12.5‰ to 20.0‰, respectively. These data plot in the field between marine carbonate and granites and are close to the marine carbonate field, suggesting that the CO2 in the ore‐forming fluids was derived from the dissolution of marine carbonate in the sedimentary rocks. The galena, sphalerite, and pyrite in Stages 1 and 3 have a narrow range of δ34S values (0–3‰), which is lower than the δ34S values of early Carboniferous to Middle‐Late Devonian seawater sulfate (+18‰ to +23‰). Therefore, because the mineralization is unrelated to magmatic activity, the sulfur in the hydrothermal sulfides was derived from regional marine sulfates primarily via organic reduction at temperatures of 100 to 200 °C. The lead isotopic compositions in the galena, sphalerite, and pyrite in Stages 1 and 3 are very similar to those in the diagenetic pyrite in the host rocks, plotting in the field of the upper crust Pb evolution curve. Thus, the lead source was likely the Carboniferous and Devonian strata. The geologic, fluid inclusion, and isotopic (C‐H‐O‐S‐Pb) evidence in this study suggests that the Xiyi Pb‐Zn deposit is a Mississippi Valley‐type deposit.
Title: Ore genesis of the Xiyi Pb‐Zn deposit, western Yunnan province, China: Geologic, fluid inclusion, and isotopic (C‐H‐O‐S‐Pb) evidence
Description:
The Xiyi Pb‐Zn deposit, located in the Baoshan Block of the Sanjiang region in western Yunnan, China, contains 1.
2 Mt of Pb‐Zn resources.
The orebodies are hosted by Devonian‐Carboniferous limestone, structurally controlled by the NE‐trending fractures, and occur in stratiform, vein, and lenticular forms.
The mineral assemblage of the ores includes sphalerite, galena, pyrite, arsenopyrite, chalcopyrite, and marcasite.
Calcite, barite, and quartz occur as gangue minerals.
Three stages of hydrothermal mineralization are recognized based on the ore textures, crosscutting relationship, and mineral assemblages: an early stage of sphalerite + galena + calcite (Stage 1), a middle stage of galena + arsenopyrite + calcite ± sphalerite (Stage 2), and a late stage of calcite + pyrite ± barite ± quartz (Stage 3).
Two types of fluid inclusions are associated with the different ore‐forming hydrothermal stages: aqueous inclusions and hydrocarbon‐H2O inclusions.
The ore‐forming fluids were characterized by low temperatures (100 ~ 200 °C), medium salinities (8 ~ 20 wt% NaCleq), and medium densities (1.
0 ~ 1.
1 g/cm3) and contained minor amounts of CH4.
The δDH2O and calculated δ18OH2O values of the Stage 1 calcite range from −89‰ to −103‰ and from 1.
5‰ to 5.
5‰, respectively, indicating that the H2O in the hydrothermal fluids was derived from seawater that had reacted with organic matter.
The δ13CPDB and δ18OSMOW values of the calcite associated with Stages 1 and 3 range from −5.
2‰ to 3.
2‰ and from 12.
5‰ to 20.
0‰, respectively.
These data plot in the field between marine carbonate and granites and are close to the marine carbonate field, suggesting that the CO2 in the ore‐forming fluids was derived from the dissolution of marine carbonate in the sedimentary rocks.
The galena, sphalerite, and pyrite in Stages 1 and 3 have a narrow range of δ34S values (0–3‰), which is lower than the δ34S values of early Carboniferous to Middle‐Late Devonian seawater sulfate (+18‰ to +23‰).
Therefore, because the mineralization is unrelated to magmatic activity, the sulfur in the hydrothermal sulfides was derived from regional marine sulfates primarily via organic reduction at temperatures of 100 to 200 °C.
The lead isotopic compositions in the galena, sphalerite, and pyrite in Stages 1 and 3 are very similar to those in the diagenetic pyrite in the host rocks, plotting in the field of the upper crust Pb evolution curve.
Thus, the lead source was likely the Carboniferous and Devonian strata.
The geologic, fluid inclusion, and isotopic (C‐H‐O‐S‐Pb) evidence in this study suggests that the Xiyi Pb‐Zn deposit is a Mississippi Valley‐type deposit.
Related Results
Ore Geology, Fluid Inclusions, and (H-O-S-Pb) Isotope Geochemistry of the Sediment-Hosted Antimony Mineralization, Lyhamyar Sb Deposit, Southern Shan Plateau, Eastern Myanmar: Implications for Ore Genesis
Ore Geology, Fluid Inclusions, and (H-O-S-Pb) Isotope Geochemistry of the Sediment-Hosted Antimony Mineralization, Lyhamyar Sb Deposit, Southern Shan Plateau, Eastern Myanmar: Implications for Ore Genesis
The Lyhamyar deposit is a large Sb deposit in the Southern Shan Plateau, Eastern Myanmar. The deposit is located in the Early Silurian Linwe Formation, occurring as syntectonic qua...
A Study of Ore‐forming Fluids in the Shimensi Tungsten Deposit, Dahutang Tungsten Polymetallic Ore Field, Jiangxi Province, China
A Study of Ore‐forming Fluids in the Shimensi Tungsten Deposit, Dahutang Tungsten Polymetallic Ore Field, Jiangxi Province, China
The Dahutang tungsten polymetallic ore field is located north of the Nanling W–Sn polymetallic metallogenic belt and south of the Middle–Lower Yangtze River Valley Cu–Mo–Au–Fe porp...
Characteristics of Ore‐forming Fluid of the Gaoshan Gold‐Silver Deposit in the Longquan Area, Zhejiang Province and its Implications for the Ore Genesis
Characteristics of Ore‐forming Fluid of the Gaoshan Gold‐Silver Deposit in the Longquan Area, Zhejiang Province and its Implications for the Ore Genesis
AbstractThe Gaoshan gold‐silver deposit, located between the Yuyao‐Lishui Fault and Jiangshan‐Shaoxing fault in Longquan Area, occurs in the Suichang‐Longquan gold‐silver polymetal...
Geologic Modeling And Visualization Facilitates The Transition From Exploration To Development
Geologic Modeling And Visualization Facilitates The Transition From Exploration To Development
Abstract
The development of interactive modeling tools and better integration of seismic and geology allow 3D geologic modeling to play a significant, new role in...
Grade 3D Block Modeling and Reserve Estimation of the C-North Iron Skarn Ore Deposit, Sangan, NE Iran
Grade 3D Block Modeling and Reserve Estimation of the C-North Iron Skarn Ore Deposit, Sangan, NE Iran
Estimation of ore grade is a time and cost consuming process that requires laboratory-based and exploratory information to present the shape and the ore grade distribution of ore ...
Tectonic Controls on the Formation of the Liwu Cu‐rich Sulfide Deposit in the Jianglang Dome, S W China
Tectonic Controls on the Formation of the Liwu Cu‐rich Sulfide Deposit in the Jianglang Dome, S W China
Abstract. The Liwu Cu‐rich sulfide deposit occurs within the Jianglang dome in the eastern margin of the Tibetan plateau. The dome consists of a core, a middle slab and a cover se...
Fe–Cu Isotope Characteristics and Geological Significance of the Yushui Seafloor Massive Sulfide Deposit in the Late Paleozoic Marine Depression, Eastern Guangdong Province
Fe–Cu Isotope Characteristics and Geological Significance of the Yushui Seafloor Massive Sulfide Deposit in the Late Paleozoic Marine Depression, Eastern Guangdong Province
The Yong’an-Meixian Late Paleozoic Hercynian depression, located in western Fujian-eastern Guangdong, is an important metallogenic belt in China. The Yushui copper-polymetallic mas...
Genesis of the Shuitoushan Pb–Zn deposit, Baoshan Block, Sanjiang region: Constraints from fluid inclusions and O, S, Pb isotopes
Genesis of the Shuitoushan Pb–Zn deposit, Baoshan Block, Sanjiang region: Constraints from fluid inclusions and O, S, Pb isotopes
The Shuitoushan Pb–Zn deposit, which is located in the southern Baoshan Block of Sanjiang region, SW China, forms an important part of the Luziyuan polymetallic ore field. The orig...

