Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Reflectance properties of analogues for the surfaces of icy moons

View through CrossRef
Spectrometers and colour imagers on past and future space missions, as well as ground-based telescopes, help us to improve our understanding of the composition of icy surfaces in the outer solar system. To help interpret these datasets, we study the VIS-NIR (0.4-2.5 µm) reflectance properties of granular (salty) ice particles exposed to simulated space environments.We further developed an original experimental chamber (SCITEAS-2) to study the evolution of samples at temperatures representative of icy planetary surfaces in the outer solar system. We built a new cooling/heating stage to precisely control the sample’s temperature, allowing us to decouple the effects of temperature and time on the sublimation process. The surface temperature of the ice is monitored by measuring IR-emission using Thermopile sensors. To study the reflectance of the sample, we use a hyperspectral imaging system consisting of a Halogen light source, a monochromator, and two cameras (CCD and MCT). We produce granular ice particles with a broad size distribution (d≈1-400µm) by flash-freezing dispersed droplets in LN2. These particles can be made from pure water or salty solutions.We observe that the VIS-spectrum of pure water ice is flatter than the one of the ice produced from a 10wt% NaCl solution, which has a blue slope. The most prominent feature of granular 10wt% NaCl-ice is a narrow absorption feature at 1.98 µm, attributed to hydrohalite (NaCl · 2H2O), which is not present in the pure ice sample. However, it only appears after some sublimation of the sample. While the spectra of pure water ice and 10wt% NaCl ice match well for the pristine samples, sublimation strongly increases the albedo of salty ice. Sublimation forms a crust atop the sample, affecting the reflectance and strongly influencing other thermo-physical properties. Therefore, we propose that sublimation is an important ingredient in interpreting spectral data of the Jovian Moon Europa because the timescales of the effects of sublimation are smaller than surface renewal by micrometeorite gardening or sputtering.These datasets will help to interpret high-resolution colour images and spectra acquired by the EIS and MISE instruments on Europa Clipper as well as similar instruments on JUICE.
Title: Reflectance properties of analogues for the surfaces of icy moons
Description:
Spectrometers and colour imagers on past and future space missions, as well as ground-based telescopes, help us to improve our understanding of the composition of icy surfaces in the outer solar system.
To help interpret these datasets, we study the VIS-NIR (0.
4-2.
5 µm) reflectance properties of granular (salty) ice particles exposed to simulated space environments.
We further developed an original experimental chamber (SCITEAS-2) to study the evolution of samples at temperatures representative of icy planetary surfaces in the outer solar system.
We built a new cooling/heating stage to precisely control the sample’s temperature, allowing us to decouple the effects of temperature and time on the sublimation process.
The surface temperature of the ice is monitored by measuring IR-emission using Thermopile sensors.
To study the reflectance of the sample, we use a hyperspectral imaging system consisting of a Halogen light source, a monochromator, and two cameras (CCD and MCT).
We produce granular ice particles with a broad size distribution (d≈1-400µm) by flash-freezing dispersed droplets in LN2.
These particles can be made from pure water or salty solutions.
We observe that the VIS-spectrum of pure water ice is flatter than the one of the ice produced from a 10wt% NaCl solution, which has a blue slope.
The most prominent feature of granular 10wt% NaCl-ice is a narrow absorption feature at 1.
98 µm, attributed to hydrohalite (NaCl · 2H2O), which is not present in the pure ice sample.
However, it only appears after some sublimation of the sample.
While the spectra of pure water ice and 10wt% NaCl ice match well for the pristine samples, sublimation strongly increases the albedo of salty ice.
Sublimation forms a crust atop the sample, affecting the reflectance and strongly influencing other thermo-physical properties.
Therefore, we propose that sublimation is an important ingredient in interpreting spectral data of the Jovian Moon Europa because the timescales of the effects of sublimation are smaller than surface renewal by micrometeorite gardening or sputtering.
These datasets will help to interpret high-resolution colour images and spectra acquired by the EIS and MISE instruments on Europa Clipper as well as similar instruments on JUICE.

Related Results

Enceladus' Subsurface Secrets: Scientific Rationale for Future Radar Sounder Measurements
Enceladus' Subsurface Secrets: Scientific Rationale for Future Radar Sounder Measurements
An outstanding question in planetary exploration addresses the habitability of icy moons in the outer Solar System. These bodies can harbor liquid water in substantial amounts over...
Survey of Irregular Jovian Moons with IVO
Survey of Irregular Jovian Moons with IVO
The Io Volcano Observer (IVO) [1] is a NASA Discovery mission currently under Phase A study [2]. Its primary goal is a thorough investigation of Io (e.g., [3]), the innermost of Ju...
Polarized reflectance of salty flash-frozen ice particles
Polarized reflectance of salty flash-frozen ice particles
Introduction:  In-situ and telescopic observations of icy moons during the last decades have improved our understanding of these bodies. One of the main features discovere...
Field analogues and laboratory experiments to constrain sublimation waves on planetary icy surfaces
Field analogues and laboratory experiments to constrain sublimation waves on planetary icy surfaces
<p><strong><span lang="EN-US">Sublimation combined with wind: </span></strong><span l...
Density of carbonaceous organic matter in icy bodies
Density of carbonaceous organic matter in icy bodies
Carbonaceous organic matter (COM), between 20 and 50%, is needed to model the rocky core of icy bodies (Neri et al, 2020, Reynard & Sotin. 2023), and account for their mass...
Icy Moons as Probes of Carbon-Rich Conditions During Giant Planet Formation
Icy Moons as Probes of Carbon-Rich Conditions During Giant Planet Formation
The densities and moments of inertia of Jovian and Saturnian icy moons, dwarf planets, and other trans-Neptunian objects (TNOs) suggest the presence of a significant low-density ca...
Modelling light scattering in icy planetary regolith using GPU accelerated ray-tracing
Modelling light scattering in icy planetary regolith using GPU accelerated ray-tracing
BackgroundFor decades, remote sensing has been the most important window to study the surfaces of planetary bodies. Inferring the physical properties like the composition, microstr...
Towards a consistent thermal-orbital model for the Galilean satellites
Towards a consistent thermal-orbital model for the Galilean satellites
In the coming decade, the JUICE and Europa Clipper spacecraft will both visit Jupiter’s Galilean satellites, a joint exploration in great part motivated by the presence of subsurfa...

Back to Top