Javascript must be enabled to continue!
Studies of the graft copolymerization of methyl methacrylate by means of the photochemical reduction of ceric ion adsorbed on cellulosic materials
View through CrossRef
AbstractIt was observed that the rate of reduction of ceric ion adsorbed on cellulose was remarkably accelerated by irradiation with ultraviolet light, and this behavior depended upon the kind of cellulose. When the graft copolymerization of methyl methacrylate on cellulose with adsorbed ceric ion was carried out by irradiation with ultraviolet light, the percent grafting decreased for softwood, bleached sulfite pulp and increased for hardwood semichemical pulp. The average molecular weight of the grafts was observed generally to decrease. If it is assumed that the ceric ions, which are reduced at an accelerated rate in the early stages of reaction with SCP, do not participate in the graft formation, a relation is observed between the modified amount of reduced ceric ion and the number of grafted chains formed, and the molar ratios of these quantities are 12:1 without irradiation and 75:1 to 100:1 with irradiation. Even when the rate of reduction of ceric ion is accelerated, the increase in the number of grafted chains is found to be very small.
Title: Studies of the graft copolymerization of methyl methacrylate by means of the photochemical reduction of ceric ion adsorbed on cellulosic materials
Description:
AbstractIt was observed that the rate of reduction of ceric ion adsorbed on cellulose was remarkably accelerated by irradiation with ultraviolet light, and this behavior depended upon the kind of cellulose.
When the graft copolymerization of methyl methacrylate on cellulose with adsorbed ceric ion was carried out by irradiation with ultraviolet light, the percent grafting decreased for softwood, bleached sulfite pulp and increased for hardwood semichemical pulp.
The average molecular weight of the grafts was observed generally to decrease.
If it is assumed that the ceric ions, which are reduced at an accelerated rate in the early stages of reaction with SCP, do not participate in the graft formation, a relation is observed between the modified amount of reduced ceric ion and the number of grafted chains formed, and the molar ratios of these quantities are 12:1 without irradiation and 75:1 to 100:1 with irradiation.
Even when the rate of reduction of ceric ion is accelerated, the increase in the number of grafted chains is found to be very small.
Related Results
The mechanism of consumption of ceric salt with cellulosic materials
The mechanism of consumption of ceric salt with cellulosic materials
AbstractEfforts were made in the present study to elucidate the mechanism of graft copolymerization of cellulose in the presence of a ceric salt as initiator. When cellulose is tre...
Effects of carbonyl and aldehyde groups in the graft copolymerization of methyl methacrylate on cellulose with a ceric salt
Effects of carbonyl and aldehyde groups in the graft copolymerization of methyl methacrylate on cellulose with a ceric salt
AbstractGraft copolymerization of methyl methacrylate on cellulosic materials of various carbonyl and aldehyde contents with the use of a ceric salt as an initiator was studied. It...
Copolymerization Characteristics of Methyl Acrylate and Methyl Methacrylate. II. Analysis of Methyl Acrylate-Methyl Methacrylate Copolymers by Infrared Spectroscopy
Copolymerization Characteristics of Methyl Acrylate and Methyl Methacrylate. II. Analysis of Methyl Acrylate-Methyl Methacrylate Copolymers by Infrared Spectroscopy
Abstract
The infrared absorption spectra of polymers and copolymers of methyl acrylate and methyl methacrylate have been measured, and then used as the basis of a sp...
Studies of the initiation mechanism of ferric ion–hydrogen peroxide systems in graft copolymerization on cellulose
Studies of the initiation mechanism of ferric ion–hydrogen peroxide systems in graft copolymerization on cellulose
AbstractThe decomposition of hydrogen peroxide by ferric ion adsorbed on cellulose, the lowering of the degree of polymerization of cellulose, and the graft copolymerization in the...
Brick masonry reinforcement with methyl methacrylate injection
Brick masonry reinforcement with methyl methacrylate injection
Introduction. Structural reinforcement of brick and stone masonry by grouting materials under pressure is an efficient approach to restoring the masonry integrity, and, in some cas...
APPLICATION OF WATERPROOFING SYSTEMS BASED ON METHYL METHACRYLATE RESIN ON TRANSPORT STRUCTURES
APPLICATION OF WATERPROOFING SYSTEMS BASED ON METHYL METHACRYLATE RESIN ON TRANSPORT STRUCTURES
Purpose. Summarize existing approaches to the use of waterproofing systems based on methyl methacrylate resin on transport structures and develop recommendations for the installati...
Comparison of human mesenchymal stem cells proliferation and differentiation on poly(methyl methacrylate) bone cements with and without mineralized collagen incorporation
Comparison of human mesenchymal stem cells proliferation and differentiation on poly(methyl methacrylate) bone cements with and without mineralized collagen incorporation
Poly(methyl methacrylate) bone cement is widely used in vertebroplasty, joint replacement surgery, and other orthopaedic surgeries, while it also exposed many problems on mechanica...
Poly(methyl methacrylate) and glycidyl-functionalized poly(methyl methacrylate) nano-size latex particles via differential microemulsion polymerization
Poly(methyl methacrylate) and glycidyl-functionalized poly(methyl methacrylate) nano-size latex particles via differential microemulsion polymerization
The differential microemulsion polymerization technique was used to synthesize nanoparticles of glycidyl-functionalized poly(methyl methacrylate), PMMA, via a two-step process, by ...

