Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Cycling Performance of LiFePO<sub>4</sub> as the Cathode Materials for Lithium Polymer Batteries
View through CrossRef
The cycle behavior and rate performance of C-LiFePO4/SPE/Li cell have been investigated at
25 °C. Carbon coated LiFePO4 (C-LiFePO4) was employed as cathode and 25PVDFLiClO4EC10PC10
was used as solid polymer electrolyte (SPE). The C-LiFePO4/SPE/Li cell exhibited above 140 mAh/g
of discharge capacity at 0.1 mA/cm2 and excellent reversible cyclability with a stable capacity on
cycling. In addition, the discharge capacity of C-LiFePO4/SPE/Li cell was 150 mAh/g at 0.1 C (0.02
mA/cm2) and 130 mAh/g at 1 C (0.2 mA/cm2), respectively.
Title: Cycling Performance of LiFePO<sub>4</sub> as the Cathode Materials for Lithium Polymer Batteries
Description:
The cycle behavior and rate performance of C-LiFePO4/SPE/Li cell have been investigated at
25 °C.
Carbon coated LiFePO4 (C-LiFePO4) was employed as cathode and 25PVDFLiClO4EC10PC10
was used as solid polymer electrolyte (SPE).
The C-LiFePO4/SPE/Li cell exhibited above 140 mAh/g
of discharge capacity at 0.
1 mA/cm2 and excellent reversible cyclability with a stable capacity on
cycling.
In addition, the discharge capacity of C-LiFePO4/SPE/Li cell was 150 mAh/g at 0.
1 C (0.
02
mA/cm2) and 130 mAh/g at 1 C (0.
2 mA/cm2), respectively.
Related Results
Absolute error analysis of virtual cathode measurement in a vacuum
Absolute error analysis of virtual cathode measurement in a vacuum
The virtual cathode is an important phenomenon in the process of thermionic emission, and it is widely present in a variety of electronic devices and systems such as vacuum tubes, ...
Investigation on the Anode Surface of High Specific Energy Li-Ion Batteries
Investigation on the Anode Surface of High Specific Energy Li-Ion Batteries
Lithium-ion batteries have become the most popular secondary battery of electric cars, electronic products and power grids with high specific energy and cycle life. Currently, the ...
Fabrication of Ruthenium-Based Cathode Material/Solid Electrolyte Composites
Fabrication of Ruthenium-Based Cathode Material/Solid Electrolyte Composites
Introduction
Oxide-based all-solid-state batteries (ASSBs) are considered safe due to their chemical stability and are attracting attention as a pow...
Electrode Design for Lithium-Sulfur Batteries Featuring High Sulfur Loading and Low Electrolyte
Electrode Design for Lithium-Sulfur Batteries Featuring High Sulfur Loading and Low Electrolyte
The limitations encountered by insertion-compound cathodes for offering lithium batteries with an enhanced energy density at an affordable cost allow the conversion-reaction cathod...
Lithium Prospectivity in the Northeast German and Thuringian Ba-sins
Lithium Prospectivity in the Northeast German and Thuringian Ba-sins
Over the years many boreholes have been drilled into the Northeast German Basin (NEGB) in pursuit of the exploration of hydrocarbons. As well as gaining important information regar...
LITHIUM HYDROXIDE FORMATION BY MEMBRANE ELECTROLYSIS
LITHIUM HYDROXIDE FORMATION BY MEMBRANE ELECTROLYSIS
The production of high-purity lithium hydroxide (LiOH) solution by electrochemical conversion of soluble lithium salts (membrane electrolysis) was tested on semi-industrial sca...
Ion Intercalation into Vanadium Sulfides for Battery Applications
Ion Intercalation into Vanadium Sulfides for Battery Applications
Global battery manufacturing capacity will more than double by 2021 to about 280,000 megawatt-hours.1 Rechargeable batteries make up a significant fraction of battery manufacturing...
Self-Standing 3D Thin Film Cathodes for Micobatteries
Self-Standing 3D Thin Film Cathodes for Micobatteries
While the microelectronic industry is advancing at a rapid pace with smaller and smaller devices, the implementation of microelectro-mechanical systems (MEMS) on the market strongl...