Javascript must be enabled to continue!
3‐D numerical simulations on flow and mixing behaviors in gas–liquid–solid microchannels
View through CrossRef
Three‐dimensional (3‐D) gas‐liquid–solid flow and mixing behaviors in microchannels were simulated by coupled volume of fluid and discrete phase method and simulations were validated against observations. The detachment time and length of gas slug are shortened in liquid–solid flow, compared with those in liquid flow due to higher superficial viscosity of liquid–solid mixture, which will move the bubble formation toward the dripping regime. Solid particles mainly distribute in liquid slug and particle flow shows obvious periodicity. With the increase of contact angle of the inner wall, gas slug (0–50°), stratified (77–120°), and liquid drop (160°) flows are observed. The residence time distributions of solid and liquid phases are similar because particles behave as tracers. The backmixing of solid and liquid phases in liquid drop flow is the weakest among the three flow patterns, and the backmixing of gas phase in slug flow is weaker than that in both stratified and liquid drop flows. The results can provide a theoretical basis for the design of microreactors. © 2013 American Institute of Chemical Engineers AIChE J, 59: 1934–1951, 2013
Title: 3‐D numerical simulations on flow and mixing behaviors in gas–liquid–solid microchannels
Description:
Three‐dimensional (3‐D) gas‐liquid–solid flow and mixing behaviors in microchannels were simulated by coupled volume of fluid and discrete phase method and simulations were validated against observations.
The detachment time and length of gas slug are shortened in liquid–solid flow, compared with those in liquid flow due to higher superficial viscosity of liquid–solid mixture, which will move the bubble formation toward the dripping regime.
Solid particles mainly distribute in liquid slug and particle flow shows obvious periodicity.
With the increase of contact angle of the inner wall, gas slug (0–50°), stratified (77–120°), and liquid drop (160°) flows are observed.
The residence time distributions of solid and liquid phases are similar because particles behave as tracers.
The backmixing of solid and liquid phases in liquid drop flow is the weakest among the three flow patterns, and the backmixing of gas phase in slug flow is weaker than that in both stratified and liquid drop flows.
The results can provide a theoretical basis for the design of microreactors.
© 2013 American Institute of Chemical Engineers AIChE J, 59: 1934–1951, 2013.
Related Results
Liquid Loading of Horizontal Gas Wells in Changbei Gas Field
Liquid Loading of Horizontal Gas Wells in Changbei Gas Field
The Changbei gas field, which initially exhibited high gas-production performance, is dominated by large-displacement horizontal wells. With the decrease in reservoir pressure, the...
Design of single-wave-based curved and rectangular serpentine microchannels for mixing applications: a CFD study
Design of single-wave-based curved and rectangular serpentine microchannels for mixing applications: a CFD study
Abstract
Microchannels are critical components in microfluidics, enabling efficient and controlled mixing of two miscible fluids by utilizing unique microscale fl...
Mechanistic Modeling of Electrical Submersible Pump ESP Boosting Pressure Under Gassy Flow Conditions and Experimental Validation
Mechanistic Modeling of Electrical Submersible Pump ESP Boosting Pressure Under Gassy Flow Conditions and Experimental Validation
Abstract
As an artificial lift method for high-flow-rate oil production, electrical submersible pumps’ (ESP) performance surfers from gas entrainment, a frequently e...
Stability Parameter for Two-Phase Vertical Annular Flow
Stability Parameter for Two-Phase Vertical Annular Flow
Abstract
A good theory of stability is essential to the prediction of flow pattern transition; therefore, it is crucial to the design of two-phase flow systems, s...
Gas Water Deliverability Considerations
Gas Water Deliverability Considerations
Abstract
When natural gas from high pressure and temperature reservoir is produced, due to cooling of gas in wellbore tubing and in gas gathering pipelines, the a...
Critical Gas Saturation During Depressurisation and its Importance in the Brent Field
Critical Gas Saturation During Depressurisation and its Importance in the Brent Field
Critical Gas Saturation During Depressurisation and its Importance in the Brent Field.
Abstract
After some 20 years of pressure ...
Fabrication of Ruthenium-Based Cathode Material/Solid Electrolyte Composites
Fabrication of Ruthenium-Based Cathode Material/Solid Electrolyte Composites
Introduction
Oxide-based all-solid-state batteries (ASSBs) are considered safe due to their chemical stability and are attracting attention as a pow...
Comparisons of Pore Structure for Unconventional Tight Gas, Coalbed Methane and Shale Gas Reservoirs
Comparisons of Pore Structure for Unconventional Tight Gas, Coalbed Methane and Shale Gas Reservoirs
Extended abstract
Tight sands gas, coalbed methane and shale gas are three kinds of typical unconventional natural gas. With the decrease of conventional oil and gas...

