Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

NaOH Molarity's Impacts on SCGC's Workability and Durability with Ecologically Friendly Industrial By-Products

View through CrossRef
The objective of the analysis is to investigate the workability and durability properties of self-compacting geopolymer concrete (SCGC) based on fly ash and GGBS on various NaOH molarities. A system of trial and error was employed to achieve the SCGC mix ratio. By conducting workability properties test such as slump flow, T50 slump flow, V-funnel, and L-box and At 28, 56 and 90 days, durability properties such as water absorption, sulphuric acid attack and sorptivity were tested. The specimens have been cured for 24 hours in the oven at 70 ° C, and environmental healing is accompanied by the test days respectively. For all the molarities including 8, 10 and 12 M with a constant binding content of 400 kg / m3, the fly ash mass fraction was changed by GGBS by 0, 30, 50, and 70 per cent by weight. In all molarities, the fluid to binder ratio of 0.47 by mass has been kept constant and the S.P dosage has remained consistent with 0% replacement and 4% with 30, 50 and 70% replacement and the water content has therefore changed accordingly. The experimental result showed lower workability parameters such as slump flow and L-box ratios with increased molarity and GGBS content, increased T50 slump flow and increased V-Funnel with increased molarity and GGBS content, and the whole study was performed as suggested by the EFNARC guidelines. Durability properties such as water absorption and sorptiveness have shown good resistance with an increase of the GGBS content and an increase in molarity. Seventy percent fly-ash replacement by GGBS showed more strength degradation when held at 5percent concentration in the sulphuric acid medium. Hence SCGC can be a better replacement for normal OPC concrete both in terms of strength and durability with reduced CO2 emission.
Title: NaOH Molarity's Impacts on SCGC's Workability and Durability with Ecologically Friendly Industrial By-Products
Description:
The objective of the analysis is to investigate the workability and durability properties of self-compacting geopolymer concrete (SCGC) based on fly ash and GGBS on various NaOH molarities.
A system of trial and error was employed to achieve the SCGC mix ratio.
By conducting workability properties test such as slump flow, T50 slump flow, V-funnel, and L-box and At 28, 56 and 90 days, durability properties such as water absorption, sulphuric acid attack and sorptivity were tested.
The specimens have been cured for 24 hours in the oven at 70 ° C, and environmental healing is accompanied by the test days respectively.
For all the molarities including 8, 10 and 12 M with a constant binding content of 400 kg / m3, the fly ash mass fraction was changed by GGBS by 0, 30, 50, and 70 per cent by weight.
In all molarities, the fluid to binder ratio of 0.
47 by mass has been kept constant and the S.
P dosage has remained consistent with 0% replacement and 4% with 30, 50 and 70% replacement and the water content has therefore changed accordingly.
The experimental result showed lower workability parameters such as slump flow and L-box ratios with increased molarity and GGBS content, increased T50 slump flow and increased V-Funnel with increased molarity and GGBS content, and the whole study was performed as suggested by the EFNARC guidelines.
Durability properties such as water absorption and sorptiveness have shown good resistance with an increase of the GGBS content and an increase in molarity.
Seventy percent fly-ash replacement by GGBS showed more strength degradation when held at 5percent concentration in the sulphuric acid medium.
Hence SCGC can be a better replacement for normal OPC concrete both in terms of strength and durability with reduced CO2 emission.

Related Results

One-shot of the hydrothermal route for synthesis of zeolite LTA using kaolin
One-shot of the hydrothermal route for synthesis of zeolite LTA using kaolin
Abstract The zeolite LTA (Z-LTA) was successfully produced from synthesis kaolin and well-crystallized using a hydrothermal method. The kaolin was heated in the furnace for...
Study on Self Compacting Geopolynmer Concrete
Study on Self Compacting Geopolynmer Concrete
Self-compacting concrete (SCC) became a strong candidate for various construction applications owing to its excellent workability, low labor demand, and enhanced finish-ability, an...
Study on the characteristics and synergistic effects of industrial complex networks – empirical evidence from Chinese manufacturing
Study on the characteristics and synergistic effects of industrial complex networks – empirical evidence from Chinese manufacturing
PurposeThe manufacturing industry and the producer service industry have a high degree of industrial correlation, and their integration will cause changes in the complex industrial...
Comparative study on flow characteristics, strength and durability of GGBS based geopolymer concrete
Comparative study on flow characteristics, strength and durability of GGBS based geopolymer concrete
Abstract Use of OPC causes the emission of CO2, which is a global house gas, to reduce the usage of OPC (Ordinary Portland Cement), GPC (Geopolymer Concrete) can be ...
Efektivitas Hcl dan Naoh sebagai Pretreatment Kolagen Kulit Kaki Ayam
Efektivitas Hcl dan Naoh sebagai Pretreatment Kolagen Kulit Kaki Ayam
Kolagen merupakan protein alami yang terdapat pada hewan, digunakan secara luas pada industri pangan sebagai bahan tambahan. Kulit kaki ayam adalah bagian yang dianggap sebagai has...
Efficient decolorization of reactive dyed cotton fabric with a two-step NaOH/ Na 2 S 2 O 4 process
Efficient decolorization of reactive dyed cotton fabric with a two-step NaOH/ Na 2 S 2 O 4 process
Abstract Waste cotton textiles can be decolorized with the NaOH/Na2S2O4 reducing system with mild and effective results. Nevertheless, this system consumes substantial amou...
Engineering Parameters of Rice Straw Concrete with Granulated Blast Furnace Slag
Engineering Parameters of Rice Straw Concrete with Granulated Blast Furnace Slag
The construction industry is responsible for a large amount of both embodied carbon and emissions. Especially with concrete, there is still a lot of potential for designing recipes...
Structural durability and concept system of structural reliability
Structural durability and concept system of structural reliability
Abstract Research on durability is vital for reliability analysis and control. The main aim is to analyze the deterioration of concrete structures resulting from mat...

Back to Top