Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Kinetics of steel melting in carbon‐steel alloys
View through CrossRef
For the melting of scrap metal in baths with a high carbon content, in which the melting temperature lies below the bath temperature, a model is being developed which is based on the coupling of mass and heat transfer. It will be shown that the mass transport determines the melting rate only for very low bath temperatures. Furthermore, it will be discussed how the melting efficiency is influenced by the supplied energy flow and mass transfer in the bath.
Title: Kinetics of steel melting in carbon‐steel alloys
Description:
For the melting of scrap metal in baths with a high carbon content, in which the melting temperature lies below the bath temperature, a model is being developed which is based on the coupling of mass and heat transfer.
It will be shown that the mass transport determines the melting rate only for very low bath temperatures.
Furthermore, it will be discussed how the melting efficiency is influenced by the supplied energy flow and mass transfer in the bath.
Related Results
Comparison of Aluminum Alloys from Aircraft of Four Nations Involved in the WWII Conflict Using Multiscale Analyses and Archival Study
Comparison of Aluminum Alloys from Aircraft of Four Nations Involved in the WWII Conflict Using Multiscale Analyses and Archival Study
Aluminum alloys are very interesting witnesses of industrial and technical development. The first ever developed was Duralumin, a light metal with good mechanical properties. In th...
HRTEM of Initial Oxidation of Carbon Nanotube Tips
HRTEM of Initial Oxidation of Carbon Nanotube Tips
Abstract
High resolution transmission electron microscopy (HRTEM) and diffraction technique, with their high sensitivity to small variations in periodic structure or...
ChIMES Carbon 2.0: A Transferable Machine-Learned Interatomic Model Harnessing Multifidelity Training Data
ChIMES Carbon 2.0: A Transferable Machine-Learned Interatomic Model Harnessing Multifidelity Training Data
We present a new parameterization of the ChIMES physics informed machine- learned interatomic model for simulating carbon under conditions ranging from 300 K and 0 GPa to 10,000 K ...
VO2 kinetics in supra-anaerobic threshold constant tests allow the visualization and quantification of the O2 saving after cytochrome C oxidase inhibition by aerobic training or nitrate administration
VO2 kinetics in supra-anaerobic threshold constant tests allow the visualization and quantification of the O2 saving after cytochrome C oxidase inhibition by aerobic training or nitrate administration
We tested whether the known cytochrome c oxidase (COX) inhibition by nitric oxide (NO) could be quantified by VO 2 kinetics during constant load supra-Anaero bic Threshold (AT) exe...
Nordic Seas total dissolved inorganic carbon data in CARINA
Nordic Seas total dissolved inorganic carbon data in CARINA
Abstract. Water column data of carbon and carbon relevant hydrographic and hydrochemical parameters from 188 previously non-publicly available cruises in the Arctic, Atlantic, and ...
The practice of writing inside an Egyptian monastic settlement: preliminary material characterisation of the inks used on Coptic manuscripts from the Monastery of Apa Apollo at Bawit
The practice of writing inside an Egyptian monastic settlement: preliminary material characterisation of the inks used on Coptic manuscripts from the Monastery of Apa Apollo at Bawit
AbstractOver the last few years, the Federal Institute for material research (BAM, Berlin) together with the Centre for the Study of Manuscript Cultures (CSMC, University of Hambur...
Strategies for connecting whole-building LCA to the low-carbon design process
Strategies for connecting whole-building LCA to the low-carbon design process
Abstract
Decarbonization is essential to meeting urgent climate goals. With the building sector in the United States accounting for 35% of total U.S. carbon emission...
Low Temperature Elastic Properties of Aluminum 5083-0 and Four Ferritic Nickel Steels
Low Temperature Elastic Properties of Aluminum 5083-0 and Four Ferritic Nickel Steels
The low-temperature elastic properties have been determined for five commercial alloys that have possible structural applications at cryogenic temperatures. The alloys are 5083-0 a...
Your session has timed out for security reasons.