Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

H-shaped modifiers loaded mirror symmetric resonator based double negative metamaterial for multi-band wireless communications

View through CrossRef
AbstractIn this article, a unique metamaterial (MTM) structure is presented that exhibits four resonances of transmission coefficient (S21) that fall into S, X, and Ku bands. The MTM design is initiated on a Rogers (RT5880) substrate with an electrical dimension of 0.088 λ × 0.088 λ (λ is calculated at 3.424 GHz). The resonating patch contains four quartiles connected by a central metallic strip. The placement of each quartile is such that the whole resonator is mirror symmetric about the vertical axis. Two H-shaped modifiers connect two quartiles of each vertical half of the resonator. These H-shaped modifiers form the resonance cavity in its vicinity, and thus help significantly to orient the overall resonances of the proposed MTM at 3.424 GHz, 10 GHz, 14.816 GHz, and 16.848 GHz. The resonance phenomena are examined through equivalent circuit modeling and verified in Advanced Design Software (ADS). Metamaterial properties of the proposed MTM are extracted and it exhibits negative permittivity, permeability, and refractive index. The prototype of the MTM is fabricated and measurement is taken. The measured S21shows a close similarity with the simulated result. Moreover, effective medium ratio (EMR) is calculated for the proposed MTM and a high EMR of 10.95 is obtained that expresses its compactness. This compact MTM with negative permittivity, permittivity, and refractive index can be important component for improving the performance of the miniaturized devices for multi-band wireless communication systems.
Title: H-shaped modifiers loaded mirror symmetric resonator based double negative metamaterial for multi-band wireless communications
Description:
AbstractIn this article, a unique metamaterial (MTM) structure is presented that exhibits four resonances of transmission coefficient (S21) that fall into S, X, and Ku bands.
The MTM design is initiated on a Rogers (RT5880) substrate with an electrical dimension of 0.
088 λ × 0.
088 λ (λ is calculated at 3.
424 GHz).
The resonating patch contains four quartiles connected by a central metallic strip.
The placement of each quartile is such that the whole resonator is mirror symmetric about the vertical axis.
Two H-shaped modifiers connect two quartiles of each vertical half of the resonator.
These H-shaped modifiers form the resonance cavity in its vicinity, and thus help significantly to orient the overall resonances of the proposed MTM at 3.
424 GHz, 10 GHz, 14.
816 GHz, and 16.
848 GHz.
The resonance phenomena are examined through equivalent circuit modeling and verified in Advanced Design Software (ADS).
Metamaterial properties of the proposed MTM are extracted and it exhibits negative permittivity, permeability, and refractive index.
The prototype of the MTM is fabricated and measurement is taken.
The measured S21shows a close similarity with the simulated result.
Moreover, effective medium ratio (EMR) is calculated for the proposed MTM and a high EMR of 10.
95 is obtained that expresses its compactness.
This compact MTM with negative permittivity, permittivity, and refractive index can be important component for improving the performance of the miniaturized devices for multi-band wireless communication systems.

Related Results

Predictors of False-Negative Axillary FNA Among Breast Cancer Patients: A Cross-Sectional Study
Predictors of False-Negative Axillary FNA Among Breast Cancer Patients: A Cross-Sectional Study
Abstract Introduction Fine-needle aspiration (FNA) is commonly used to investigate lymphadenopathy of suspected metastatic origin. The current study aims to find the association be...
A Miniaturized Enhanced Gain Wideband Metamaterial Loaded Planar Inverted F-L Implant Antenna
A Miniaturized Enhanced Gain Wideband Metamaterial Loaded Planar Inverted F-L Implant Antenna
Abstract The antenna presented in this work is a planar inverted F-L (PIFLIA) implant antenna. The PIFLIA characteristics are improved by loading it with a metamaterial. A ...
Resonator-Inspired Metamaterial Sensor: Design and Experimental Validation for Measuring Thickness of Multi-Layered Structures
Resonator-Inspired Metamaterial Sensor: Design and Experimental Validation for Measuring Thickness of Multi-Layered Structures
A digit 8-shaped resonator inspired metamaterial is proposed herein for sensor applications. The resonator is surrounded by a ground frame and excited by a microstrip feedline. The...
Spin-wave band gaps created by rotating square rods in triangular lattice magnonic crystals
Spin-wave band gaps created by rotating square rods in triangular lattice magnonic crystals
Recently, magnonic crystals which are the magnetic counterparts of photonic crystals or phononic crystals are becoming a hot area of research. In this paper, band structure of two-...
Polarization dependent high refractive index metamaterial with metallic dielectric grating structure in infrared band
Polarization dependent high refractive index metamaterial with metallic dielectric grating structure in infrared band
According to the theory of high refractive index of metamaterials, a composite structure of metal dielectric grating was designed to achieve high refractive index in infrared band....
Tunable grapheme amplitude based broadband electromagnetically-induced-transparency-like metamaterial
Tunable grapheme amplitude based broadband electromagnetically-induced-transparency-like metamaterial
Metamaterials, composed of subwavelength resonators, have extraordinary electromagnetic properties which rely on the sizes and shapes of the resonance structures rather than their ...
Design of a broadband and high-gain shared-aperture fabry-perot resonator magneto-electric microstrip antenna
Design of a broadband and high-gain shared-aperture fabry-perot resonator magneto-electric microstrip antenna
The demands for highly directive antennas are becoming more stringent, especially in microwave regions. Traditional ways to enhance the antenna gain such as reflectors, dielectric ...
DESAIN DAN SIMULASI METAMATERIAL ABSORBER UNTUK APLIKASI RADAR CROSS SECTION REDUCTION
DESAIN DAN SIMULASI METAMATERIAL ABSORBER UNTUK APLIKASI RADAR CROSS SECTION REDUCTION
Adanya suatu permasalahan kendaraan militer pada kapal maritim yang mengalami pendeteksian dan penyerangan dari pesawat tempur karena kapal tersebut terdeteksi oleh adanya radar da...

Back to Top