A Comparison between Hardness, Corrosion and Wear Performance of APS Sprayed WC-CoMo and WC-Co Coatings

In order to be competitive, it is demanded to have thin, tough and long lasting coatings. An important aspect is to use stable deposition technologies. As Cr assures wear, corrosion and high temperature resistance, the most employed coatings in industry generally contain Cr. Nevertheless, Cr is a hazardous element for the humans’ health, therefore, sustainable alternatives are needed to be implemented. The aim of this work is to investigate the microstructure, hardness, corrosion resistance and wear behavior of the novel WC-CoMo compared to conventional WC-Co coatings. So far, WC-CoMo coatings are not part of state of the art regarding the Atmospheric Plasma Sprayed (APS) coatings. WC-Co powder in plain form and mechanically mixed with Mo was deposited using the APS method on standardized Type A Almen Strips (C67 steel). The size of the powder grains varies between 5 µm and 30 µm. The obtained samples were investigated by means of Scanning Electron Microscopy, Energy Dispersive X-Ray Spectroscopy, X-Ray Diffraction, and hardness, wear and corrosion behavior were also evaluated. Results revealed formation of different intermetallic phases around the WC particles, which have a benefic influence on the coating characteristics and microstructure.