Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Fabrication of TiCx-TiB2/Al Composites for Application as a Heat Sink
View through CrossRef
Metal matrix composites reinforced with ceramic particles have become the most attractive material in the research and development of new materials for thermal management applications. In this work, 40–60 vol. % TiCx-TiB2/Al composites were successfully fabricated by the method of combustion synthesis and hot press consolidation in an Al-Ti-B4C system. The effect of the TiCx-TiB2 content on the microstructure and compression properties of the composites was investigated. Moreover, the abrasive wear behavior and thermo-physics properties of the TiCx-TiB2/Al composite were studied and compared with the TiCx/Al composite. The compression properties, abrasive wear behavior and thermo-physics properties of the TiCx-TiB2/Al composite are all better than those of the TiCx/Al composite, which confirms that the TiCx-TiB2/Al composite is more appropriate for application as a heat sink.
Title: Fabrication of TiCx-TiB2/Al Composites for Application as a Heat Sink
Description:
Metal matrix composites reinforced with ceramic particles have become the most attractive material in the research and development of new materials for thermal management applications.
In this work, 40–60 vol.
% TiCx-TiB2/Al composites were successfully fabricated by the method of combustion synthesis and hot press consolidation in an Al-Ti-B4C system.
The effect of the TiCx-TiB2 content on the microstructure and compression properties of the composites was investigated.
Moreover, the abrasive wear behavior and thermo-physics properties of the TiCx-TiB2/Al composite were studied and compared with the TiCx/Al composite.
The compression properties, abrasive wear behavior and thermo-physics properties of the TiCx-TiB2/Al composite are all better than those of the TiCx/Al composite, which confirms that the TiCx-TiB2/Al composite is more appropriate for application as a heat sink.
Related Results
Optimization of preheating temperature for TiB2 reinforcement on the preparation of stir cast LM4 + TiB2 composites and effect of artificial aging on hardness improvement using ANOVA
Optimization of preheating temperature for TiB2 reinforcement on the preparation of stir cast LM4 + TiB2 composites and effect of artificial aging on hardness improvement using ANOVA
This work emphasizes the optimization of preheating temperature of TiB2 reinforcement powder with LM4 composites, and statistical analysis for predicting hardness improvement durin...
Numerical Evaluation of Clearance Requirements Around Obstructions in Finned Heat Sinks
Numerical Evaluation of Clearance Requirements Around Obstructions in Finned Heat Sinks
This study uses CFD to consider the effects of obstructions (bosses) on the fluid flow and heat transfer in finned heat sinks used for cooling electronic components. In particular,...
Effect of Y-TZP on Mechanical Properties of Al2O3-TiB2 Ceramics
Effect of Y-TZP on Mechanical Properties of Al2O3-TiB2 Ceramics
The effect of Y-TZP additive on the mechanical properties of Al2O3-TiB2 ceramics was investigated. The results indicate that Y-TZP additive can enhance the flexure strength and fra...
The coherent growth and mechanical properties of non-isostructural TiN/TiB2 nanomultilayers
The coherent growth and mechanical properties of non-isostructural TiN/TiB2 nanomultilayers
TiN/TiB2 nanomutlialyers with different TiB2 layer thickne ss were prepared using multi-target magnetron sputtering method. The effects of TiB2 layer thickness on the growth stru...
Effect of Hot Rolling on the Mechanical and Corrosion Properties of Altib2 Composites
Effect of Hot Rolling on the Mechanical and Corrosion Properties of Altib2 Composites
Aluminium matrix composites reinforced with varying weight percentages (0,2,4,5,6,8 and 10%) of TiB2 were fabricated using the stir casting process and the in-situ approach. The di...
Kinetic Models for the in Situ Reaction between Cu-Ti Melt and Graphite
Kinetic Models for the in Situ Reaction between Cu-Ti Melt and Graphite
The in situ reaction method for preparing metal matrix composites has the advantages of a simple process, good combination of the reinforcing phase and matrix, etc. Based on the me...
Magnesium Heat Sink Evaluations
Magnesium Heat Sink Evaluations
<div class="htmlview paragraph">A system has been constructed to estimate heat dissipated from geometrically identical heat sinks and pinfins extruded from magnesium (M1A) an...
Wear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB<sub>2</sub>
Wear Properties of Metal Matrix Composite Al-Cu and Al-Cu-TiB<sub>2</sub>
Tensile and wear properties of aluminium (Al) based metal matrix composites (MMCs) was prepared by added titanium diboride (TiB2) with in-situ technique by salt route. The salts us...