Search engine for discovering works of Art, research articles, and books related to Art and Culture
Javascript must be enabled to continue!
Bainite Morphology in Two Experimental Mo-Cr and Mo-Cr-V-Ti Steels
View through CrossRef
Abstract
The paper presents an investigation of the bainite morphology in two experimental Mo-Cr and Mo-Cr-V-Ti steels using TEM, high speed dilatometry backed by thermodynamic analysis. The microstructure was investigated using metallography and TEM method. After austenitisation at 1200oC followed by bainitic reaction in upper and lower temperatures of isothetmal transformation the bainite was in the form of classical sheaves. The amont, distribution and morphology of retained austenite and bainitic ferrite depend on prior austenitisation and isothermal transformation temperatures within the bainitic range.
Title: Bainite Morphology in Two Experimental Mo-Cr and Mo-Cr-V-Ti Steels
Description:
Abstract
The paper presents an investigation of the bainite morphology in two experimental Mo-Cr and Mo-Cr-V-Ti steels using TEM, high speed dilatometry backed by thermodynamic analysis.
The microstructure was investigated using metallography and TEM method.
After austenitisation at 1200oC followed by bainitic reaction in upper and lower temperatures of isothetmal transformation the bainite was in the form of classical sheaves.
The amont, distribution and morphology of retained austenite and bainitic ferrite depend on prior austenitisation and isothermal transformation temperatures within the bainitic range.
Related Results
Modeling And Characterization Of High Carbon Nanobainitic Steels
Modeling And Characterization Of High Carbon Nanobainitic Steels
Analytical models have been developed for the transformation kinetics, microstructure analysis and the mechanical properties in bainitic steels. Three models are proposed for the b...
Modeling And Characterization Of High Carbon Nanobainitic Steels
Modeling And Characterization Of High Carbon Nanobainitic Steels
Analytical models have been developed for the transformation kinetics, microstructure analysis and the mechanical properties in bainitic steels. Three models are proposed for the b...
Features of the restructuring of ods steels with different nanostructures under irradiation
Features of the restructuring of ods steels with different nanostructures under irradiation
Nanoscale mechanisms of radiation hardening of oxide dispersion-strengthened (ODS) steels steels with different nanostructures, differing in the type of inclusions, their sizes and...
Impact Toughness of Spring Steel after Bainite and Martensite Transformation
Impact Toughness of Spring Steel after Bainite and Martensite Transformation
It has been reported that a multiphase microstructure with bainite, martensite, and retained austenite obtained by austempering, or quenching and tempering of spring steel containi...
Mold Steels
Mold Steels
Abstract
Mold steels are used for plastic molding and certain die-casting applications and are designated as group P steels in the AISI classification system. The fa...
High Speed Steels
High Speed Steels
Abstract
High-speed tool steels have in common the ability to maintain high hardness at elevated temperatures. High speed steels are primarily used for cutting tools...
Metallurgical Design of High Strength/High Toughness Steels
Metallurgical Design of High Strength/High Toughness Steels
The proper balance between yield strength, YS, and ductile to brittle transition temperature, DBTT, has been the main concern during development of high strength engineering steels...
Research on Continuous Cooling Dynamic Transformation of T700
Research on Continuous Cooling Dynamic Transformation of T700
Continuous cooling dynamic transformation regularity of T700 was investigated by gleeble-3500. The results show when the cooling rate is small organization is mainly composed of po...