Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Identification of Critical Sea States for Sloshing Model Tests

View through CrossRef
This paper presents a methodology for identifying a set of irregular sea states for sloshing model test conditions that are most likely to produce large sloshing pressures on tank walls. To identify the critical sea states, the sloshing pseudo-response amplitude operator (RAO) is defined based on the total sloshing wave energy that is the sum of kinetic and potential energies on the free surface. The mathematical model is formulated in the frequency domain within the regime of potential flow theory. A concept of sloshing intensity is then introduced to define the sloshing severity in an irregular sea state based on the area under the sloshing wave energy response spectrum curve. The tank is expected to induce violent fluid motions for high sloshing intensity values and, as a result, its walls can experience large sloshing impact pressures. The validity of the proposed methodology is investigated by comparing the results of the numerical analysis to those of the model test for the cargo tank of a floating liquefied natural gas terminal. Favorable results in identifying the critical sea states are obtained for tested filling levels. The proposed methodology can be utilized as a pre-screening procedure for selecting relevant sea states at the initial phase of the sloshing model test and for use in the selection of sloshing flow simulation conditions.
Title: Identification of Critical Sea States for Sloshing Model Tests
Description:
This paper presents a methodology for identifying a set of irregular sea states for sloshing model test conditions that are most likely to produce large sloshing pressures on tank walls.
To identify the critical sea states, the sloshing pseudo-response amplitude operator (RAO) is defined based on the total sloshing wave energy that is the sum of kinetic and potential energies on the free surface.
The mathematical model is formulated in the frequency domain within the regime of potential flow theory.
A concept of sloshing intensity is then introduced to define the sloshing severity in an irregular sea state based on the area under the sloshing wave energy response spectrum curve.
The tank is expected to induce violent fluid motions for high sloshing intensity values and, as a result, its walls can experience large sloshing impact pressures.
The validity of the proposed methodology is investigated by comparing the results of the numerical analysis to those of the model test for the cargo tank of a floating liquefied natural gas terminal.
Favorable results in identifying the critical sea states are obtained for tested filling levels.
The proposed methodology can be utilized as a pre-screening procedure for selecting relevant sea states at the initial phase of the sloshing model test and for use in the selection of sloshing flow simulation conditions.

Related Results

Self-induced sloshing excited by a horizontally injected plane jet
Self-induced sloshing excited by a horizontally injected plane jet
A self-induced free-surface oscillation termed ‘self-induced sloshing’ was observed in a rectangular tank with a submerged and horizontally injected water jet. Self-induced slosh...
Simulación numérica del sloshing
Simulación numérica del sloshing
Simulación numérica del sloshing Numerical simulation of sloshing Miguel A. Celis Carbajal, Juan B.V.Wanderley, Marcelo A.S. Neves Universidad Federal de Rio de Janeiro/COPPE, R...
Rapid sloshing-free transport of liquids in arbitrarily shaped containers
Rapid sloshing-free transport of liquids in arbitrarily shaped containers
Abstract We present a model-based feedforward control strategy suitable for designing swift rest-to-rest maneu-vers for liquids in arbitrarily shaped containers. We employ ...
Comparative assessment of force models for two-dimensional hydrodynamic sloshing in rectangular tanks under horizontal excitation
Comparative assessment of force models for two-dimensional hydrodynamic sloshing in rectangular tanks under horizontal excitation
Sloshing dynamics in tanks represent a complex free-surface flow phenomenon, particularly significant when assessing hydrodynamic forces. Accurate modelling of dynamic processes un...
On three types of sea breeze in Qingdao of East China: an observational analysis
On three types of sea breeze in Qingdao of East China: an observational analysis
Our knowledge of sea breeze remains poor in the coastal area of East China, due largely to the high terrain heterogeneity. Five–year (2016–2020) consecutive wind observations from ...
Linearised metamodel for two-dimensional sloshing effects in partially-filled rectangular tanks under horizontal excitation
Linearised metamodel for two-dimensional sloshing effects in partially-filled rectangular tanks under horizontal excitation
Sloshing dynamics in partially-filled rectangular tanks remains a computationally demanding phenomenon in applications such as tuned liquid dampers, largely due to high computation...
Linearised metamodel for two-dimensional sloshing effects in partially-filled rectangular tanks under horizontal excitation
Linearised metamodel for two-dimensional sloshing effects in partially-filled rectangular tanks under horizontal excitation
Sloshing dynamics in partially-filled rectangular tanks remains a computationally demanding phenomenon in applications such as tuned liquid dampers, largely due to high computation...

Back to Top