Javascript must be enabled to continue!
Scientific bases and peculiarities of conversion of CHPP anthracite boilers to sub-bituminous coal combustion
View through CrossRef
Scientific bases and peculiarities of conversion of CHPP anthracite boilers to sub-bituminous coal combustion Print EmailUser Rating: / 0 PoorBest Category: Content №1 2024 Last Updated on 29 February 2024 Published on 30 November -0001 Hits: 1 SocButtons v1.4 Authors: M.V.Chernyavskyy*, orcid.org/0000-0003-4225-4984, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: mchernyavski@gmail.com O.Yu.Provalov, orcid.org/0000-0002-5191-2259, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: eproval@ukr.net Ye.S.Miroshnychenko, orcid.org/0000-0003-2487-6886, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: yevhenmi@gmail.com O.V.Kosyachkov, orcid.org/0000-0002-9445-8738, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: alexkosoy@ukr.net * Corresponding author e-mail: mchernyavski@gmail.com повний текст / full article Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu. 2024, (1): 041 - 049 https://doi.org/10.33271/nvngu/2024-1/041 Abstract: Purpose. Development of scientific foundations and generalization of experience in development and implementation of technical solutions for conversion of CHPP anthracite boilers with steam productivity up to 250 t/h for combusting sub-bituminous coal with maximum use of existing equipment. Methodology. Consumption and heat calculations of pulverizing systems, aerodynamic calculations of pulverized coal pipes and burners, thermal calculations of boilers and combustion chambers. Calculation justification of technical solutions to eliminate the risk of coal ignition in pulverizing systems and in the burners. Industrial tests on CHPP boiler units. Findings. Different types of pulverizing systems of anthracite CHPP boilers with ball-drum mills, an intermediate pulverized coal hopper and with hot air as a drying agent were considered, and a classification of pulverizing systems by the method of pulverized coal transport to the burners (with drying agent or hot air), and boilers – by the type and location of the burners and the geometry of the furnace, was performed. The problems were analyzed, the calculations of pulverizing systems, pipes, burners, and boilers were performed according to the applied technical solutions, and the experience was summarized of conversion from anthracite to sub-bituminous coal in the boilers of Myronivska, Darnytska CHPP and of the first line of Slovianska TPP. Recommendations are given on methods of conversion of anthracite boilers with a steam capacity of up to 250 t/h with different types of pulverizing systems for burning sub-bituminous coal with maximum use of existing equipment. Originality. For pulverizing systems with ball-drum mills and an intermediate hopper for pulverized coal with hot air as a drying agent classification was made for the first time by the type of transporting agent, and it was shown that when converting from anthracite to sub-bituminous coal with the air transport of pulverized coal to the burners, it is necessary to use the selection of slightly heated air from the first stage of the air heater. It is substantiated that maintaining the temperature conditions of molten slag removal while reducing the share of hot air consumption to the furnace requires the preferential operation of pulverizing systems in a single-mill mode, which is possible due to the greater grindability of sub-bituminous coal. Practical value. Based on the experience of approving technical solutions at Myronivska, Darnytska CHPPs, and at the first line of Slovianska TPP, recommendations are given on how to transfer anthracite boilers with a steam capacity of up to 250 t/h with different types of pulverizing systems for burning sub-bituminous coal with maximum use of existing equipment.
Dnipro University of Technology
Title: Scientific bases and peculiarities of conversion of CHPP anthracite boilers to sub-bituminous coal combustion
Description:
Scientific bases and peculiarities of conversion of CHPP anthracite boilers to sub-bituminous coal combustion Print EmailUser Rating: / 0 PoorBest Category: Content №1 2024 Last Updated on 29 February 2024 Published on 30 November -0001 Hits: 1 SocButtons v1.
4 Authors: M.
V.
Chernyavskyy*, orcid.
org/0000-0003-4225-4984, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: mchernyavski@gmail.
com O.
Yu.
Provalov, orcid.
org/0000-0002-5191-2259, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: eproval@ukr.
net Ye.
S.
Miroshnychenko, orcid.
org/0000-0003-2487-6886, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: yevhenmi@gmail.
com O.
V.
Kosyachkov, orcid.
org/0000-0002-9445-8738, Thermal Energy Technology Institute of National Academy of Sciences of Ukraine, Kyiv, Ukraine, e-mail: alexkosoy@ukr.
net * Corresponding author e-mail: mchernyavski@gmail.
com повний текст / full article Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu.
2024, (1): 041 - 049 https://doi.
org/10.
33271/nvngu/2024-1/041 Abstract: Purpose.
Development of scientific foundations and generalization of experience in development and implementation of technical solutions for conversion of CHPP anthracite boilers with steam productivity up to 250 t/h for combusting sub-bituminous coal with maximum use of existing equipment.
Methodology.
Consumption and heat calculations of pulverizing systems, aerodynamic calculations of pulverized coal pipes and burners, thermal calculations of boilers and combustion chambers.
Calculation justification of technical solutions to eliminate the risk of coal ignition in pulverizing systems and in the burners.
Industrial tests on CHPP boiler units.
Findings.
Different types of pulverizing systems of anthracite CHPP boilers with ball-drum mills, an intermediate pulverized coal hopper and with hot air as a drying agent were considered, and a classification of pulverizing systems by the method of pulverized coal transport to the burners (with drying agent or hot air), and boilers – by the type and location of the burners and the geometry of the furnace, was performed.
The problems were analyzed, the calculations of pulverizing systems, pipes, burners, and boilers were performed according to the applied technical solutions, and the experience was summarized of conversion from anthracite to sub-bituminous coal in the boilers of Myronivska, Darnytska CHPP and of the first line of Slovianska TPP.
Recommendations are given on methods of conversion of anthracite boilers with a steam capacity of up to 250 t/h with different types of pulverizing systems for burning sub-bituminous coal with maximum use of existing equipment.
Originality.
For pulverizing systems with ball-drum mills and an intermediate hopper for pulverized coal with hot air as a drying agent classification was made for the first time by the type of transporting agent, and it was shown that when converting from anthracite to sub-bituminous coal with the air transport of pulverized coal to the burners, it is necessary to use the selection of slightly heated air from the first stage of the air heater.
It is substantiated that maintaining the temperature conditions of molten slag removal while reducing the share of hot air consumption to the furnace requires the preferential operation of pulverizing systems in a single-mill mode, which is possible due to the greater grindability of sub-bituminous coal.
Practical value.
Based on the experience of approving technical solutions at Myronivska, Darnytska CHPPs, and at the first line of Slovianska TPP, recommendations are given on how to transfer anthracite boilers with a steam capacity of up to 250 t/h with different types of pulverizing systems for burning sub-bituminous coal with maximum use of existing equipment.
Related Results
Converting Slovianska TPP with the central coal pulverizing plant from anthracite to sub-bituminous coal
Converting Slovianska TPP with the central coal pulverizing plant from anthracite to sub-bituminous coal
Purpose. To develop scientific foundations and technical solutions and to implement the converting of the anthracite boiler of the 800 MW unit of Slovianska TPP with central coal p...
CFD-modeling of critical deviations of combustion processes in pulverized coal boilers. Part 1. Construction of the TPP-210A boiler calculation model
CFD-modeling of critical deviations of combustion processes in pulverized coal boilers. Part 1. Construction of the TPP-210A boiler calculation model
Purpose. Development of a mathematical model for predicting critical deviations of furnace processes during the operation of anthracite boilers converted to burning sub-bituminous ...
Research on water immersion damage characteristics and equivalent width of coal pillar
Research on water immersion damage characteristics and equivalent width of coal pillar
Abstract
Affected by weakening effect of water in the goaf, the bearing capacity of coal pillar reduced, and coal pillar rock burst is prone to occur, which is a serious th...
CONVERSION OF ANTHRACITE BOILER UNITS OF CHP PLANTS FOR COMBUSTION OF SUB-BITUMINOUS COAL IN THE WAR CONDITIONS
CONVERSION OF ANTHRACITE BOILER UNITS OF CHP PLANTS FOR COMBUSTION OF SUB-BITUMINOUS COAL IN THE WAR CONDITIONS
The work describes the task of urgently converting the boilers of anthracite-burning combined heat and power plants to sub-bituminous coal, which arose in the conditions of Russian...
Changing Landscape of the Coal Mining Industry in the United States
Changing Landscape of the Coal Mining Industry in the United States
Coal has long been a valuable natural resource in the United States throughout the country’s history. European settlers began to use coal in the late 1740s and, as energy demands ...
Research on the Modification of Coal Adaptability and Carbon Emissions Reduction Technology for Coal-Fired Boilers
Research on the Modification of Coal Adaptability and Carbon Emissions Reduction Technology for Coal-Fired Boilers
In order to solve the problems of the high temperature of flue gas, low boiler efficiency, and the high concentration of nitrogen oxide (NOx) emissions for a 330 MW boiler fired wi...
Nanoscale pore structure in anthracite coals and its effect on methane adsorption capacity
Nanoscale pore structure in anthracite coals and its effect on methane adsorption capacity
Although significant amounts of methane are present in anthracite coal seams, coalbed methane resources cannot be extracted effectively and quickly. This study mainly focused on in...

