Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Optimization design model construction of round faceted gemstone facets based on geometric transformation theory

View through CrossRef
The current gemstone jewelry design is not specialized and systematic enough, and most of the gemstone jewelry styles are common and single, which makes the value of gemstone not reasonably reflected. Starting from the evolution of gemstone facets, facet texture and cut classification, the article takes the three-dimensional features of gemstone facets as the basis and optimizes the cut parameters of gemstone facets by combining with geometric transformation theory. The optimized cutting parameters were used as the basis for 3D modeling, and the 3D model of the round faceted gemstone facets was established with the simulation software, and the quantitative analysis of the data was carried out through the brightness, uniformity, and scintillation values. When the table width ratio is 50-60%, the difference between the crown angle and the inclination angle of the star facet corresponding to the circular faceted gemstone facets varies from 9.172° to 20.673°. When the length ratio of the lower girdle facets is 65% to 95%, respectively, the range of the difference between the lower girdle facet inclination and the pavilion angle is between 0.781° and 1.967°. The scintillation value obtained after designing the gem facets using the method of this paper is 4.67 times higher than that of the traditional method. The optimized design model of round faceted faceted gemstones constructed on the basis of geometric transformation theory can provide new ideas for the jewelry design of round faceted faceted gemstones
Title: Optimization design model construction of round faceted gemstone facets based on geometric transformation theory
Description:
The current gemstone jewelry design is not specialized and systematic enough, and most of the gemstone jewelry styles are common and single, which makes the value of gemstone not reasonably reflected.
Starting from the evolution of gemstone facets, facet texture and cut classification, the article takes the three-dimensional features of gemstone facets as the basis and optimizes the cut parameters of gemstone facets by combining with geometric transformation theory.
The optimized cutting parameters were used as the basis for 3D modeling, and the 3D model of the round faceted gemstone facets was established with the simulation software, and the quantitative analysis of the data was carried out through the brightness, uniformity, and scintillation values.
When the table width ratio is 50-60%, the difference between the crown angle and the inclination angle of the star facet corresponding to the circular faceted gemstone facets varies from 9.
172° to 20.
673°.
When the length ratio of the lower girdle facets is 65% to 95%, respectively, the range of the difference between the lower girdle facet inclination and the pavilion angle is between 0.
781° and 1.
967°.
The scintillation value obtained after designing the gem facets using the method of this paper is 4.
67 times higher than that of the traditional method.
The optimized design model of round faceted faceted gemstones constructed on the basis of geometric transformation theory can provide new ideas for the jewelry design of round faceted faceted gemstones.

Related Results

Iøjnefaldende arkitektur – Nordens middelalderlige rundkirker
Iøjnefaldende arkitektur – Nordens middelalderlige rundkirker
Conspicuous architecture. Medieval round churches in ScandinaviaThe aim of this article is partly to argue why round churches were built and partly to present an updated overview o...
Quaternary geology related to gemstone deposit in Bo Phloi Basin, Amphoe Bo Phloi, Changwat Kanchanaburi
Quaternary geology related to gemstone deposit in Bo Phloi Basin, Amphoe Bo Phloi, Changwat Kanchanaburi
Bo Phloi district of Kanchanaburi province is one of the major famous source of blue sapphire in Thailand. It is thus the aim of this research is to study the characteristics of ge...
Gemstone Materials
Gemstone Materials
AbstractThere are three types of gemstone materials as defined by the U.S. Federal Trade Commission: natural gemstones are found in nature and at most are enhanced; imitation or si...
Design
Design
Conventional definitions of design rarely capture its reach into our everyday lives. The Design Council, for example, estimates that more than 2.5 million people use design-related...
SCF Equations for T/Y and K Square-to-Round Tubular Joint
SCF Equations for T/Y and K Square-to-Round Tubular Joint
Summary A parametric stress analysis of T/Y and K square-to-round tubular joints subjected to axial loads and in-plane and out-of-plane bending moments has been p...
Shape optimization for beam structural design
Shape optimization for beam structural design
"Optimization is concerned with achieving the best outcome of a given objective while satisfying certain restrictions. The central purpose of structural analysis is to predict the ...
The relation between emotional intelligence and dark triad traits, limitations of research
The relation between emotional intelligence and dark triad traits, limitations of research
IntroductionThe war has affected every Ukrainian to some extent. With the mobilization comes the increased risk of people with dark triad traits (DT) (psychopathy, machiavellianism...

Back to Top