Javascript must be enabled to continue!
Comparative Study on the Structural and Electrochemical Properties of Nitrogen Doped and Nitrogen and Sulfur Co-Doped Reduced Graphene Oxide Electrode Prepared by Hydrothermal Technique
View through CrossRef
To improve properties of supercapacitor electrodes, nitrogen- and co-nitrogen and sulfur-doped reduced graphene oxide (named as N-rGO and N&S-rGO) was prepared by a facile hydrothermal technique using urea and thiourea as doping agents, respectively, for serving as supercapacitor electrodes. Both were compared with rGO in electrochemical evaluations. The supercapacitor using N-rGO in 1 M H2SO4 provided the largest specific capacitance 99 F g-1, while that using N&S-rGO and rGO exhibited 51 and 19 F g-1 at 0.25 A g-1, respectively. Furthermore, the supercapacitors using N-rGO and N&S-rGO electrodes showed a smaller charge transfer resistance (Rct) and a lower IR-drop than that using rGO electrode, indicating a faster charge transfer at the interface between electrode and electrolyte and higher electronic conductivity due to N or N&S heteroatom doping in the graphene oxide structure. Moreover, a higher sp2 hybridization ratio and a lower ID/IG ratio of the N-rGO electrode, compared to those of the N&S-rGO electrode. Furthermore, the lowest contact angles of N&S-rGO electrode was found, attributed to better aqueous electrolyte compatibility than N-rGO and rGO electrode. Therefore, the providing of higher electrical conductivity of N-rGO electrode reveal more relevant characteristics for high-performance supercapacitor than good wettability of N&S-rGO electrode.
Elsevier BV
Sarawudh Nathabumroong
N. Chanlek
Thanapong Sareein
Ekachai Chongsereecharoen
Phakkhannan Pakawanit
Chatwarin Poochai
Tanachat Eknapakul
Chakrit Sriprachuabwong
Hideki Nakajima
Piyaporn Thangdee
Tanom Lomas
Saroj Rujirawat
Prayoon Songsiriritthigul
Prapan Manyum
Adisorn Tuantranont
Rattikorn Yimnirun
Title: Comparative Study on the Structural and Electrochemical Properties of Nitrogen Doped and Nitrogen and Sulfur Co-Doped Reduced Graphene Oxide Electrode Prepared by Hydrothermal Technique
Description:
To improve properties of supercapacitor electrodes, nitrogen- and co-nitrogen and sulfur-doped reduced graphene oxide (named as N-rGO and N&S-rGO) was prepared by a facile hydrothermal technique using urea and thiourea as doping agents, respectively, for serving as supercapacitor electrodes.
Both were compared with rGO in electrochemical evaluations.
The supercapacitor using N-rGO in 1 M H2SO4 provided the largest specific capacitance 99 F g-1, while that using N&S-rGO and rGO exhibited 51 and 19 F g-1 at 0.
25 A g-1, respectively.
Furthermore, the supercapacitors using N-rGO and N&S-rGO electrodes showed a smaller charge transfer resistance (Rct) and a lower IR-drop than that using rGO electrode, indicating a faster charge transfer at the interface between electrode and electrolyte and higher electronic conductivity due to N or N&S heteroatom doping in the graphene oxide structure.
Moreover, a higher sp2 hybridization ratio and a lower ID/IG ratio of the N-rGO electrode, compared to those of the N&S-rGO electrode.
Furthermore, the lowest contact angles of N&S-rGO electrode was found, attributed to better aqueous electrolyte compatibility than N-rGO and rGO electrode.
Therefore, the providing of higher electrical conductivity of N-rGO electrode reveal more relevant characteristics for high-performance supercapacitor than good wettability of N&S-rGO electrode.
Related Results
CVD-Grown Graphene Modified with Aryl Groups by Electroreduction of Corresponding Diazonium Salts
CVD-Grown Graphene Modified with Aryl Groups by Electroreduction of Corresponding Diazonium Salts
Graphene has been widely studied material because of its interesting properties (for example large surface area, high conductivity, good mechanical, electronic, optical, thermal an...
The structure of thermally reduced graphene oxide
The structure of thermally reduced graphene oxide
The paper focused on the description of the reduced graphene oxide (rGO) structure. This material is obtained from a multistage production process. Each of these stages has a large...
Preparation of Graphene Fibers
Preparation of Graphene Fibers
Graphene owns intriguing properties in electronic, thermal, and mechanic with unique two-dimension (2D) monolayer structure. The new member of carbon family has not only attracted ...
The influence of the oxidation method on the properties of reduced graphene oxide
The influence of the oxidation method on the properties of reduced graphene oxide
Derivatives of graphene have become important materials due to their excellent properties. Graphene oxide and reduced graphene oxide are especially interesting because they are pro...
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Graphene has been thought to be an ideal reinforcement material for metal matrix composite due to its superior mechanical properties and unique two-dimensional geometry. However, t...
Boosting Oxygen Electrode Performance via a Redox-Treatment
Boosting Oxygen Electrode Performance via a Redox-Treatment
Introduction
The transition to a sustainable energy system complying with climate policy targets is a huge societal challenge. “Hard to electri...
Praseodymium Doped Ceria as Nickel-Free Fuel Electrode Material for Solid Oxide Electrolysis Cells
Praseodymium Doped Ceria as Nickel-Free Fuel Electrode Material for Solid Oxide Electrolysis Cells
Solid Oxide Electrolysis Cells (SOECs) play a key role in power-to-gas applications as a relevant electrochemical conversion device for addressing the global energy crisis. It uses...
The influence of the type of graphite on the size of reduced graphene oxide
The influence of the type of graphite on the size of reduced graphene oxide
Reduced graphene oxide is a very attractive material for sensor applications. It exhibits high conductivity at room temperature and high specific surface area. Since it can be prod...

