Javascript must be enabled to continue!
Pore Type, Pore Structure, and Controlling Factors in the Late Triassic Lacustrine Yanchang Shale, Ordos Basin, China
View through CrossRef
Organic-rich lacustrine shales in the Upper Triassic Yanchang Formation with thermal maturity mainly in the oil window are the main shale oil and shale gas system in the lacustrine strata of the Ordos Basin, China. Pore systems are important for the storage and transfer of shale oil and gas. The main objectives of this study are to identify the pore types and pore structures and investigate the controlling factors for pore types, pore structures, and total porosities of the lacustrine Yanchang Shale. In this study, organic-rich mudstones, mudstones with siltstone interlayers, siltstone, and sandstones were selected from 15 wells in the southern Ordos Basin. X-ray diffraction, pyrolysis, scanning electron microscopy (SEM), low-pressure nitrogen adsorption analysis, and helium porosimetry were conducted to investigate the mineral compositions, pore types, pore structures, porosities, and controlling factors. Siltstone and sandstone interlayers heterogeneously developed in the Yanchang Shale. The petrology, mineral composition, geochemistry, pore type, pore structure, and porosity of siltstone interlayers are different from those of mudstones. The siltstone and sandstone interlayers usually have more quartz and feldspars, greater detrital grain sizes, and relatively better grain sorting but are lower in clay minerals, total organic carbon (TOC), amount of free liquid hydrocarbons values (S1), and total residual hydrocarbons values (S2), compared to mudstones. Interparticle (interP), intraparticle (intraP) pores, and organic pores (OPs) were developed in both siltstones and mudstones. OPs were observed in samples with lower thermal maturity (e.g., 0.5–0.85%). The inorganic pore size is greater than that of OPs. Additionally, the inorganic pore diameters in siltstone interlayers are also greater than those in mudstones. Organic-rich mudstones generally have higher pore volumes (PVs) of pores with sizes less than 10 nm, pore volumes of pores with sizes between 10 and 50 nm (PV, 10–50 nm), and specific surface area (SSA), but they have lower PVs of pores with sizes greater than 50 nm, total PV, and porosity when compared to siltstone and sandstone interlayers. The dominant pore type in mudstones is OPs and TOC (first order), sources and OM types (second order), and thermal maturity (third order), while the abundances of rigid grains with greater sizes and grain sorting are the main controlling factors of pore structures, SSA and PV. Both inorganic pores and organic pores are abundant in the siltstone interlayers. The pore size distribution (PSD), PV, and porosity of siltstone interlayers are related to the abundance of rigid grains (first order), grain sorting (second order), grain size (third order), and carbonate cement content. The total PV and porosity of Yanchang Shale reservoirs may have increased with the increased abundance of siltstone and sandstone interlayers.
Title: Pore Type, Pore Structure, and Controlling Factors in the Late Triassic Lacustrine Yanchang Shale, Ordos Basin, China
Description:
Organic-rich lacustrine shales in the Upper Triassic Yanchang Formation with thermal maturity mainly in the oil window are the main shale oil and shale gas system in the lacustrine strata of the Ordos Basin, China.
Pore systems are important for the storage and transfer of shale oil and gas.
The main objectives of this study are to identify the pore types and pore structures and investigate the controlling factors for pore types, pore structures, and total porosities of the lacustrine Yanchang Shale.
In this study, organic-rich mudstones, mudstones with siltstone interlayers, siltstone, and sandstones were selected from 15 wells in the southern Ordos Basin.
X-ray diffraction, pyrolysis, scanning electron microscopy (SEM), low-pressure nitrogen adsorption analysis, and helium porosimetry were conducted to investigate the mineral compositions, pore types, pore structures, porosities, and controlling factors.
Siltstone and sandstone interlayers heterogeneously developed in the Yanchang Shale.
The petrology, mineral composition, geochemistry, pore type, pore structure, and porosity of siltstone interlayers are different from those of mudstones.
The siltstone and sandstone interlayers usually have more quartz and feldspars, greater detrital grain sizes, and relatively better grain sorting but are lower in clay minerals, total organic carbon (TOC), amount of free liquid hydrocarbons values (S1), and total residual hydrocarbons values (S2), compared to mudstones.
Interparticle (interP), intraparticle (intraP) pores, and organic pores (OPs) were developed in both siltstones and mudstones.
OPs were observed in samples with lower thermal maturity (e.
g.
, 0.
5–0.
85%).
The inorganic pore size is greater than that of OPs.
Additionally, the inorganic pore diameters in siltstone interlayers are also greater than those in mudstones.
Organic-rich mudstones generally have higher pore volumes (PVs) of pores with sizes less than 10 nm, pore volumes of pores with sizes between 10 and 50 nm (PV, 10–50 nm), and specific surface area (SSA), but they have lower PVs of pores with sizes greater than 50 nm, total PV, and porosity when compared to siltstone and sandstone interlayers.
The dominant pore type in mudstones is OPs and TOC (first order), sources and OM types (second order), and thermal maturity (third order), while the abundances of rigid grains with greater sizes and grain sorting are the main controlling factors of pore structures, SSA and PV.
Both inorganic pores and organic pores are abundant in the siltstone interlayers.
The pore size distribution (PSD), PV, and porosity of siltstone interlayers are related to the abundance of rigid grains (first order), grain sorting (second order), grain size (third order), and carbonate cement content.
The total PV and porosity of Yanchang Shale reservoirs may have increased with the increased abundance of siltstone and sandstone interlayers.
Related Results
The Genetic Mechanism of the Sequence Stratigraphy of the Rift Lacustrine Basin in Jiyang Depression, East China
The Genetic Mechanism of the Sequence Stratigraphy of the Rift Lacustrine Basin in Jiyang Depression, East China
Abstract
Through the studies of sequence stratigraphy of early Tertiary in the east part of Jiyang depression, the characteristics of sequence evolution in contin...
An Emerging CO2 Storage Option: CO2 Storage and By-Product Oil Recovery from Shale Oil Formations
An Emerging CO2 Storage Option: CO2 Storage and By-Product Oil Recovery from Shale Oil Formations
Recent studies, sponsored by the United States Energy Association (USEA) and prepared by Advanced Resources International, have identified an emerging CO2 storage option – injectin...
Geochemical Characteristics of Crude Oil in Member 7 of Yanchang Formation in Yanchang Oilfield
Geochemical Characteristics of Crude Oil in Member 7 of Yanchang Formation in Yanchang Oilfield
Oil is an important primary energy for national production and life and national defense, and China is the key to rapid development. It is of great strategic significance to ensure...
Paleogeographic framework and Paleo-sedimentary environmental restoration in the Lower Part of Yanchang formation in Triassic of Ordos Basin, China
Paleogeographic framework and Paleo-sedimentary environmental restoration in the Lower Part of Yanchang formation in Triassic of Ordos Basin, China
<p><strong>Title: Paleogeographic framework and Paleo-sedimentary environmental restoration in the Lower Part of Yanchang formation in Triassic of Ordos...
Shallow‐lacustrine sand‐rich deltaic depositional cycles and sequence stratigraphy of the Upper Triassic Yanchang Formation, Ordos Basin, China
Shallow‐lacustrine sand‐rich deltaic depositional cycles and sequence stratigraphy of the Upper Triassic Yanchang Formation, Ordos Basin, China
ABSTRACTShallow‐lacustrine delta deposits of the Upper Triassic Yanchang Formation form the most important petroleum reservoir sandstone units in the Ordos Basin, China. Recent hyd...
GEOLOGICAL CHARACTERISTICS AND SOME PROBLEMS IN DEVELOPMENT FOR OIL SHALE IN NORTHWEST CHINA ; pp. 380–397
GEOLOGICAL CHARACTERISTICS AND SOME PROBLEMS IN DEVELOPMENT FOR OIL SHALE IN NORTHWEST CHINA ; pp. 380–397
With the amount of oil resources becoming increasingly scarce, non-convenÂtional resources such as oil shale, oil sands, and heavy oil, have caught our attenÂtion. There are abun...
Pore Characteristics and Factors Influencing the Oil Content in the Chang 7 Shale of the Yanchang Formation in the Dingbian–Yanchang Area of the Ordos Basin,
NW
China
Pore Characteristics and Factors Influencing the Oil Content in the Chang 7 Shale of the Yanchang Formation in the Dingbian–Yanchang Area of the Ordos Basin,
NW
China
ABSTRACT
Organic‐rich shales in continental basins in China have strong reservoir heterogeneity, and their development of pore size is contro...
EffectiveFracturing Technology of Normal Pressure Shale Gas Wells
EffectiveFracturing Technology of Normal Pressure Shale Gas Wells
ABSTRACT
There is abundant normal pressure shale gas resource in China. However, it is hard to acquire commercial breakthroughs because of the relative low initia...

