Javascript must be enabled to continue!
Quasi-Two-Dimensional β-Ga2O3 based Hetero-Structure Transistors
View through CrossRef
β-Ga2O3 is a wide band gap (4.8 eV) semiconducting material with outstanding chemical and thermal stabilities. As the breakdown voltage of β-Ga2O3 is estimated to be as high as 8 MV/cm, it can be applied to high-power electronics. After β-Ga2O3 thin layers were successfully exfoliated from bulk single crystals by mechanical exfoliation method, the study of high power 2D nano-electronics using β-Ga2O3 received a considerable attention. Though β-Ga2O3 is not a two-dimensional Van der Waals material like graphene and MoS2, a bulk β-Ga2O3 crystal can be easily cleaved into thin nano-flakes in the (100) direction; it has monoclinic structure and the lattice constant is larger along the cleaved plane. Moreover, this ultrathin β-Ga2O3 flakes can be integrated with other 2D materials such as hexagonal boron nitride (h-BN) and transition metal dichalcogenides (TMDs) to make down-scaled, flexible devices. We demonstrated two types of heterostructure devices (MISFETs and JFETs) based on β-Ga2O3 flakes and 2D materials using PDMS stamp method and photolithography.
β-Ga2O3/h-BN hetero-structure based quasi-two-dimensional metal insulator semiconductor field-effect transistors(MISFETs) are fabricated. The h-BN dielectric, which has an extraordinarily flat and clean surface, provides a minimal density of charged impurities at the interface between β-Ga2O3 and h-BN, resulting in excellent device performances. The fabricated MISFETs showed superior drain current modulation with high on/off ratio and low gate leakage current. The double-gating of the fabricated device was demonstrated by biasing both top and bottom gates, achieving the modulation of the threshold voltage.
N-channel β-Ga2O3/WSe2 heterostructure junction field effect transistors (JFETs) are demonstrated with good gate modulation and negligible hysteresis. Tungsten diselenide (WSe2) is mostly known as a stable p-type 2D layered material. The fabricated heterostructure JFETs also showed excellent ambient stability. The successful JFET operation is attributed to Van der Waals junction interface between β-Ga2O3 and WSe2. These heterostructured wide-band-gap nanodevices show a new route toward stable and high-power nanoelectronic devices. The details of the fabrication procedure and results will be presented.
Title: Quasi-Two-Dimensional β-Ga2O3 based Hetero-Structure Transistors
Description:
β-Ga2O3 is a wide band gap (4.
8 eV) semiconducting material with outstanding chemical and thermal stabilities.
As the breakdown voltage of β-Ga2O3 is estimated to be as high as 8 MV/cm, it can be applied to high-power electronics.
After β-Ga2O3 thin layers were successfully exfoliated from bulk single crystals by mechanical exfoliation method, the study of high power 2D nano-electronics using β-Ga2O3 received a considerable attention.
Though β-Ga2O3 is not a two-dimensional Van der Waals material like graphene and MoS2, a bulk β-Ga2O3 crystal can be easily cleaved into thin nano-flakes in the (100) direction; it has monoclinic structure and the lattice constant is larger along the cleaved plane.
Moreover, this ultrathin β-Ga2O3 flakes can be integrated with other 2D materials such as hexagonal boron nitride (h-BN) and transition metal dichalcogenides (TMDs) to make down-scaled, flexible devices.
We demonstrated two types of heterostructure devices (MISFETs and JFETs) based on β-Ga2O3 flakes and 2D materials using PDMS stamp method and photolithography.
β-Ga2O3/h-BN hetero-structure based quasi-two-dimensional metal insulator semiconductor field-effect transistors(MISFETs) are fabricated.
The h-BN dielectric, which has an extraordinarily flat and clean surface, provides a minimal density of charged impurities at the interface between β-Ga2O3 and h-BN, resulting in excellent device performances.
The fabricated MISFETs showed superior drain current modulation with high on/off ratio and low gate leakage current.
The double-gating of the fabricated device was demonstrated by biasing both top and bottom gates, achieving the modulation of the threshold voltage.
N-channel β-Ga2O3/WSe2 heterostructure junction field effect transistors (JFETs) are demonstrated with good gate modulation and negligible hysteresis.
Tungsten diselenide (WSe2) is mostly known as a stable p-type 2D layered material.
The fabricated heterostructure JFETs also showed excellent ambient stability.
The successful JFET operation is attributed to Van der Waals junction interface between β-Ga2O3 and WSe2.
These heterostructured wide-band-gap nanodevices show a new route toward stable and high-power nanoelectronic devices.
The details of the fabrication procedure and results will be presented.
Related Results
Surface Adsorption and Air Damping Behavior of β‐Ga2O3 Nanomechanical Resonators
Surface Adsorption and Air Damping Behavior of β‐Ga2O3 Nanomechanical Resonators
AbstractBeta gallium oxide (β‐Ga2O3) has emerged as a highly promising semiconductor material with an ultrawide bandgap ranging from 4.5 to 4.9 eV for future applications in power ...
Optical Sensor Fabricated From Beta Gallium Oxide Nanorods
Optical Sensor Fabricated From Beta Gallium Oxide Nanorods
Beta gallium oxide (β-Ga2O3) has attracted lots of attentions for the applications in optical devices. 1-D and 2-D β-Ga2O3 can be synthesized by several simple methods such as hydr...
Design and research of high voltage β-Ga2O3/4H-SiC heterojunction LDMOS
Design and research of high voltage β-Ga2O3/4H-SiC heterojunction LDMOS
Abstract
In recent years, gallium oxide (Ga2O3), one of the ultra-wide band-gap semiconductor materials, has been regarded as one of the most promising materials in ...
β-Ga2O3 Schottky Barrier Diode with Ion Beam Sputter-Deposited Semi-Insulating Layer
β-Ga2O3 Schottky Barrier Diode with Ion Beam Sputter-Deposited Semi-Insulating Layer
Vertical Schottky barrier diodes based on an ion beam sputter (IBS)-deposited β-Ga2O3 film on a single-crystalline (2¯01) unintentionally doped (UID) β-Ga2O3 with a Ni contact were...
Thermal transport in ion-beam-exfoliated β-Ga2O3 nanomembranes
Thermal transport in ion-beam-exfoliated β-Ga2O3 nanomembranes
β-Ga2O3 is a promising material for power electronics due to its wide bandgap and high breakdown field, but its low thermal conductivity poses challenges for heat dissipation. To a...
High-Performance ε-Ga2O3 Solar-Blind Photodetectors Grown by MOCVD with Post-Thermal Annealing
High-Performance ε-Ga2O3 Solar-Blind Photodetectors Grown by MOCVD with Post-Thermal Annealing
High-temperature annealing has been regarded as an effective technology to improve the performance of Ga2O3-based solar-blind photodetectors (SBPDs). However, as a metastable phase...
β-Ga₂O₃ For Power Electronic Devices
β-Ga₂O₃ For Power Electronic Devices
This thesis explores the development of processes to realise β-Ga2O3-based devices, focusing on etching protocols, dielectric characterisation, and forming ohmic contacts.This work...
High Sensitivity Low-Temperature Hydrogen Sensors Based on SnO2/κ(ε)-Ga2O3:Sn Heterostructure
High Sensitivity Low-Temperature Hydrogen Sensors Based on SnO2/κ(ε)-Ga2O3:Sn Heterostructure
The structural and gas-sensitive properties of n-N SnO2/κ(ε)-Ga2O3:Sn heterostructures were investigated in detail for the first time. The κ(ε)-Ga2O3:Sn and SnO2 films were grown b...

