Javascript must be enabled to continue!
In-situ monitoring of longitudinal stress response of segmental tunnel lining induced by cross passage construction
View through CrossRef
Based on in-situ monitoring tests, this study investigates the evolution and characteristics of the longitudinal stress in segmental linings within saturated sand strata during cross passage construction. First, systematic monitoring is conducted to capture the mechanical behavior of the shield tunnel, including longitudinal stress, transverse reinforcement stress, the condition of ring joints, and the temperature field of the frozen wall during cross-passage construction. Next, an analysis examines the variation patterns and characteristics of the longitudinal stress in the shield tunnel. Finally, an ANSYS analysis model is developed to elucidate the formation mechanism underlying the stress variation characteristics of the shield tunnel. The results show that: (1) The variation in longitudinal stress within the shield tunnel is predominantly positive, indicating that the absolute value of longitudinal stress between rings tends to decrease. The maximum displacement of the circumferential joints in the shield tunnel reaches 0.25 mm, and the maximum fluctuation range of longitudinal strain in the shield tunnel segments is 83.7 . (2) Cross passage construction significantly influences the longitudinal stress of shield tunnels, with active freezing being the primary factor causing variations; during active freezing, the absolute value of the longitudinal stress in the shield tunnel can decrease by 36.7%. (3) During active ground freezing, the reduction in pore water pressure can decrease the peak longitudinal stress in the shield tunnel. However, its impact on longitudinal stress varies significantly at different locations along the tunnel. The cumulative variation in longitudinal stress within the shield tunnel tends to increase as the freezing time extends. (4) Under the influence of frost heave, the stress field of the shield tunnel exhibits pronounced nonlinear variations, undergoing significant changes during specific time intervals. The extent to which frost heave affects the longitudinal stress state of the shield tunnel is determined by multiple factors, including the expansion rate of the frozen wall thickness, the degree of closure of the frozen wall, and the magnitude of fluctuations in pore water pressure.
Title: In-situ monitoring of longitudinal stress response of segmental tunnel lining induced by cross passage construction
Description:
Based on in-situ monitoring tests, this study investigates the evolution and characteristics of the longitudinal stress in segmental linings within saturated sand strata during cross passage construction.
First, systematic monitoring is conducted to capture the mechanical behavior of the shield tunnel, including longitudinal stress, transverse reinforcement stress, the condition of ring joints, and the temperature field of the frozen wall during cross-passage construction.
Next, an analysis examines the variation patterns and characteristics of the longitudinal stress in the shield tunnel.
Finally, an ANSYS analysis model is developed to elucidate the formation mechanism underlying the stress variation characteristics of the shield tunnel.
The results show that: (1) The variation in longitudinal stress within the shield tunnel is predominantly positive, indicating that the absolute value of longitudinal stress between rings tends to decrease.
The maximum displacement of the circumferential joints in the shield tunnel reaches 0.
25 mm, and the maximum fluctuation range of longitudinal strain in the shield tunnel segments is 83.
7 .
(2) Cross passage construction significantly influences the longitudinal stress of shield tunnels, with active freezing being the primary factor causing variations; during active freezing, the absolute value of the longitudinal stress in the shield tunnel can decrease by 36.
7%.
(3) During active ground freezing, the reduction in pore water pressure can decrease the peak longitudinal stress in the shield tunnel.
However, its impact on longitudinal stress varies significantly at different locations along the tunnel.
The cumulative variation in longitudinal stress within the shield tunnel tends to increase as the freezing time extends.
(4) Under the influence of frost heave, the stress field of the shield tunnel exhibits pronounced nonlinear variations, undergoing significant changes during specific time intervals.
The extent to which frost heave affects the longitudinal stress state of the shield tunnel is determined by multiple factors, including the expansion rate of the frozen wall thickness, the degree of closure of the frozen wall, and the magnitude of fluctuations in pore water pressure.
Related Results
Construction time of secondary lining of ultra-small spacing parallel overlapping tunnel
Construction time of secondary lining of ultra-small spacing parallel overlapping tunnel
Abstract
Due to the unique spatial structure, stress transfer mechanism, and construction disturbance characteristics of ultra-small spacing parallel overlapping tu...
Structural response of precast concrete segmental tunnel linings
Structural response of precast concrete segmental tunnel linings
The increasing use of the tunnel boring machines (TBMs) has entailed their own evolution and the improvement of the construction processes applied, allowing the construction of tun...
An alternative lining of steel ladles: technical and economic aspects
An alternative lining of steel ladles: technical and economic aspects
Quality of steel ladles lining to a big extent determine the economic efficiency of steel-making operation. Direct costs on the refractory lining of them can reach 30–50 % of the c...
ANALYSIS AND DESIGN OF MRT’S CIRCULAR TU
ANALYSIS AND DESIGN OF MRT’S CIRCULAR TU
ABSTRACTJakarta MRT was one of solution to solve the traffic jam in Jakarta. There are two physical constructions which serves as the main infrastructure of Jakarta MRT, elevated a...
A New Health Assessment Index of Tunnel Lining Based on the Digital Inspection of Surface Cracks
A New Health Assessment Index of Tunnel Lining Based on the Digital Inspection of Surface Cracks
The stability assessment of aged tunnel linings are mainly evaluated based on the visual inspection, and the Tunnel-lining Crack Index (TCI) is one of the most widely used tunnel l...
A New Health Assessment Index of Tunnel Lining Based on the Digital Inspection of Surface Cracks
A New Health Assessment Index of Tunnel Lining Based on the Digital Inspection of Surface Cracks
The stability assessment of aged tunnel linings were mainly evaluated based on the visual inspection, and the Tunnel-lining Crack Index (TCI) is one of the most widely used tunnel ...
Study on the Correlation of Vibration Properties and Crack Index in the Health Assessment of Tunnel Lining
Study on the Correlation of Vibration Properties and Crack Index in the Health Assessment of Tunnel Lining
This paper examines the correlation of vibration properties and crack index of tunnel lining in evaluating risk of collapsing. The visual inspection method, which was widely used, ...
Study on Mechanical Characteristics and Construction Control of the Railway Overlapping Tunnels
Study on Mechanical Characteristics and Construction Control of the Railway Overlapping Tunnels
In tunnel engineering, newly built tunnels will disturb the surrounding strata and close-to-existing tunnels, which may cause secondary lining cracking and overall damage to existi...

