Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Surface Roughness Values of Magnesium Alloy AZ31 When Turning by Using Rotary Cutting Tool

View through CrossRef
Abstract - Magnesium and magnesium alloys is one of materials that worldwide used on automotive components due to very good  strength to weight ratio, resistant to corrosion, lighter compare to steel materials. Other than that magnesium has an advantage in easy to form and good machinability.  Nevertheless, magnesium known as metal which is easy to burned because of magnesium has low melting point. To maintain magnesium from burning quickly when proses machining, it needs to use coolant or lubricant to reduce temperature. Using of coolant when machining process can reduce temperature on cutting tool and work piece material, while using of lubricant can reduce friction between the cutting tool and work piece mateial. However, using of coolant and lubricant can harm for the environment and also coolant difficult to destroyed. Therefore, an alternative method to reduce the temperature when machining of magnesium alloy is using  the rotary cutting tool system. In the rotary cutting tool system, the cutting tool has a time to experience cooling in the period time. Other than aspect of temperature, surface roughness values are representative of surface of quality of produced componens. In this research, surface roughness value of magnesium alloy of AZ31 observed in ranges of work piece cutting speed of  (Vw) 25, 50, 120, 160, 200 m/min, rotary cutting speed of (Vt) 25, 50, 75 m/min, feed rate of (f) 0,05  and 0,10 mm/rev, and depth of cut of 0.2 mm. The turning process was done by using two kinds of diameter of rotary cutting tools are 16 and 20 mm, and without applying of coolant. The results of the research showed that the minimum surface roughness value of machined surface was 0,62????m by using insert with diameter of 16 mm, while the maximum surface roughness value of machined surface was 2,86 ????m by using insert with diameter of 20 mm. This result stated that the increase in the diameter of rotary cutting tool gives a significant effect on the produced surface roughness value. Factor of feed rate also gives a significant contribution on the surface roughness value of machined magnesium surface.  The increase in feed rate generated significantly surface roughness value as long as the trials experiments. The produced surface roughness values inversely proportional to the cutting speed of rotary cutting tool.Keywords - magnesium, rotary tool, surface roughness, turning. 
Lembaga Penelitian dan Pengabdian kepada Masyarakat Universitas Lampung
Title: Surface Roughness Values of Magnesium Alloy AZ31 When Turning by Using Rotary Cutting Tool
Description:
Abstract - Magnesium and magnesium alloys is one of materials that worldwide used on automotive components due to very good  strength to weight ratio, resistant to corrosion, lighter compare to steel materials.
Other than that magnesium has an advantage in easy to form and good machinability.
  Nevertheless, magnesium known as metal which is easy to burned because of magnesium has low melting point.
To maintain magnesium from burning quickly when proses machining, it needs to use coolant or lubricant to reduce temperature.
Using of coolant when machining process can reduce temperature on cutting tool and work piece material, while using of lubricant can reduce friction between the cutting tool and work piece mateial.
However, using of coolant and lubricant can harm for the environment and also coolant difficult to destroyed.
Therefore, an alternative method to reduce the temperature when machining of magnesium alloy is using  the rotary cutting tool system.
In the rotary cutting tool system, the cutting tool has a time to experience cooling in the period time.
Other than aspect of temperature, surface roughness values are representative of surface of quality of produced componens.
In this research, surface roughness value of magnesium alloy of AZ31 observed in ranges of work piece cutting speed of  (Vw) 25, 50, 120, 160, 200 m/min, rotary cutting speed of (Vt) 25, 50, 75 m/min, feed rate of (f) 0,05  and 0,10 mm/rev, and depth of cut of 0.
2 mm.
The turning process was done by using two kinds of diameter of rotary cutting tools are 16 and 20 mm, and without applying of coolant.
The results of the research showed that the minimum surface roughness value of machined surface was 0,62????m by using insert with diameter of 16 mm, while the maximum surface roughness value of machined surface was 2,86 ????m by using insert with diameter of 20 mm.
This result stated that the increase in the diameter of rotary cutting tool gives a significant effect on the produced surface roughness value.
Factor of feed rate also gives a significant contribution on the surface roughness value of machined magnesium surface.
  The increase in feed rate generated significantly surface roughness value as long as the trials experiments.
The produced surface roughness values inversely proportional to the cutting speed of rotary cutting tool.
Keywords - magnesium, rotary tool, surface roughness, turning.
 .

Related Results

Optimising tool wear and workpiece condition monitoring via cyber-physical systems for smart manufacturing
Optimising tool wear and workpiece condition monitoring via cyber-physical systems for smart manufacturing
Smart manufacturing has been developed since the introduction of Industry 4.0. It consists of resource sharing and networking, predictive engineering, and material and data analyti...
Shear Damage Suppression Model of Magnesium Alloy Plates
Shear Damage Suppression Model of Magnesium Alloy Plates
Abstract By shearing Q235 steel, aluminum, and AZ31 magnesium alloy at room temperature, the shear area of Q235 steel and aluminum is found to be relatively flat whereas th...
Corrosion Behavior of AZ31 and AZ31-0.5Ca in Different Concentrations of NaCl and Na2SO4 at Various Temperatures
Corrosion Behavior of AZ31 and AZ31-0.5Ca in Different Concentrations of NaCl and Na2SO4 at Various Temperatures
Magnesium (Mg) alloys are used in many structural and automotive applications, though the high susceptibility toward corrosion poses a bottleneck toward its diverse applications. M...
A Dynamic Analysis of the Rotary Cutting System of King Grass Shredder
A Dynamic Analysis of the Rotary Cutting System of King Grass Shredder
With the rotary cutting system of king grass shredder as the research object, this paper established finite element models for rotating shaft, rotating shaft-belt pulley, rotating ...
Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm
Cutting Parameters Optimization of Mild Steel via AIS Heuristics Algorithm
. The minimum cost and high productivity of the recent industrial renaissance are its main challengers. Selecting the optimum cutting parameters play a significant role in achievin...
Resource-efficient technology for the utilization of serpentine technogenic waste with the production of magnesium oxide
Resource-efficient technology for the utilization of serpentine technogenic waste with the production of magnesium oxide
The article discusses the possibility of using serpentine and serpentine waste from Zhitikara deposit for the production of inorganic magnesium compounds: MgSO4, Mg(OH)2 and MgO. T...
PENGARUH VARIASI KEDALAMAN PEMOTONGAN DAN KECEPATAN PEMOTONGAN TERHADAP KEKASARAN PERMUKAAN ALUMINIUM 7075
PENGARUH VARIASI KEDALAMAN PEMOTONGAN DAN KECEPATAN PEMOTONGAN TERHADAP KEKASARAN PERMUKAAN ALUMINIUM 7075
Riset ini bermaksud untuk mengetahui pengaruh variasi kedalaman pemotongan serta kecepatan pemotongan atas nilai kekasaran permukaan aluminium 7075. kesimpulan kecepatan pemotongan...
Study on damping capacity of graphite particle—reinforced AZ31 magnesium matrix composites
Study on damping capacity of graphite particle—reinforced AZ31 magnesium matrix composites
The damping capacities of 1%, 5%, and 9% (by mass) graphite particle—reinforced AZ31 magnesium matrix (Grp/AZ31) composites and unreinforced AZ31 magnesium alloy in as-annealed and...

Back to Top