Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Impact of Wood Structure Variability on the Surface Roughness of Chestnut Wood

View through CrossRef
Wood constitutes a unique and valuable material that has been used from ancient times until nowadays in a wide variety of applications, in which the surface quality of wood often constitutes a critical factor. In this study, the influence of different wood areas and therefore, of different anatomical characteristic areas of chestnut wood (Castanea sativa Mill.) on the surface quality, was thoroughly studied, in terms of surface roughness. Five different chestnut tree trunks were harvested, from which five different disks were obtained corresponding to five different trunk heights. Surface roughness was measured on these disks on the transverse, radial, and tangential planes, on the areas of sapwood and heartwood, measuring the roughness in each point both vertically and in parallel to the wood grain. The results revealed that the examined roughness indexes (Ra, Rz, Rq) follow a parallel path to one another. In the case of all surfaces (transverse, radial, tangential) of the disks examined, when the measurement was implemented perpendicularly to the wood grain, a significantly higher roughness was recorded, compared to the wood grain measurements being implemented in parallel with the wood grain. Significant differences between heartwood and sapwood roughness were not demonstrated, although sapwood often appeared to exhibit a higher surface roughness than heartwood sites. Among the roughness values of the three different surfaces, the highest roughness in the vertical-to-wood-grain measurements was recorded by tangential surfaces, with slightly lower values on the transverse surfaces and the lowest roughness on radial surfaces. Meanwhile, for the measurements in parallel with the wood grain, the transverse surfaces presented significantly higher roughness values compared to the tangential and radial surfaces. Significant roughness differences were not detected among the surfaces at different trunk heights. Although, significant differences in roughness were recorded among different trees, it was observed that all the studied trees align with the identified and described within-tree trends.
Title: Impact of Wood Structure Variability on the Surface Roughness of Chestnut Wood
Description:
Wood constitutes a unique and valuable material that has been used from ancient times until nowadays in a wide variety of applications, in which the surface quality of wood often constitutes a critical factor.
In this study, the influence of different wood areas and therefore, of different anatomical characteristic areas of chestnut wood (Castanea sativa Mill.
) on the surface quality, was thoroughly studied, in terms of surface roughness.
Five different chestnut tree trunks were harvested, from which five different disks were obtained corresponding to five different trunk heights.
Surface roughness was measured on these disks on the transverse, radial, and tangential planes, on the areas of sapwood and heartwood, measuring the roughness in each point both vertically and in parallel to the wood grain.
The results revealed that the examined roughness indexes (Ra, Rz, Rq) follow a parallel path to one another.
In the case of all surfaces (transverse, radial, tangential) of the disks examined, when the measurement was implemented perpendicularly to the wood grain, a significantly higher roughness was recorded, compared to the wood grain measurements being implemented in parallel with the wood grain.
Significant differences between heartwood and sapwood roughness were not demonstrated, although sapwood often appeared to exhibit a higher surface roughness than heartwood sites.
Among the roughness values of the three different surfaces, the highest roughness in the vertical-to-wood-grain measurements was recorded by tangential surfaces, with slightly lower values on the transverse surfaces and the lowest roughness on radial surfaces.
Meanwhile, for the measurements in parallel with the wood grain, the transverse surfaces presented significantly higher roughness values compared to the tangential and radial surfaces.
Significant roughness differences were not detected among the surfaces at different trunk heights.
Although, significant differences in roughness were recorded among different trees, it was observed that all the studied trees align with the identified and described within-tree trends.

Related Results

Mineral Composition and Heavy Metal Contents of Chestnut Honey Collected From Kastamonu Region
Mineral Composition and Heavy Metal Contents of Chestnut Honey Collected From Kastamonu Region
Chestnut honey, which is known for its apitherapic properties besides its nutritional attributes, is one of the main groups of monofloral honey types. Kastamonu is the most importa...
The Research and Design of the Peeling Chestnut Peng Machine
The Research and Design of the Peeling Chestnut Peng Machine
In order to peel the barbed fresh chestnut, the peeling chestnut Peng machine is designed. At present, peeling chestnut Peng machine has very shortcomings such as can not classify ...
Evolution of tooth flank roughness during gear micropitting tests
Evolution of tooth flank roughness during gear micropitting tests
PurposeThe purpose of this paper is to get a better understanding of roughness evolution and micropitting initiation on the tooth flank, as well as the evolution of surface topogra...
Effect of Grinding and Subsequent Various Surface Treatments on the Surface Roughness of Full Contour Monolithic Zirconia
Effect of Grinding and Subsequent Various Surface Treatments on the Surface Roughness of Full Contour Monolithic Zirconia
BACKGROUND A smooth zirconia surface is necessary to protect the opposing natural dentition, to prevent plaque accumulation and to increase the survival rate of restoration by redu...
Reflectance and Emission Modelling of Airless Exoplanets
Reflectance and Emission Modelling of Airless Exoplanets
IntroductionRocky airless bodies in the solar system, e.g., Mercury, the Moon, and many asteroids, host a rough silicate regolith layer. The roughness of the surfaces influences th...
Endoparasite of pupae of the chestnut transient moth
Endoparasite of pupae of the chestnut transient moth
Goal. To conduct a search for endoparasites of pupae of the chestnut transient moth in natural conditions, to determine their species composition, biological and ecological feature...
Analisis Kekasaran Permukaan Benda Kerja Hasil Pembubutan dengan Variasi Jenis Material dan Pahat Potong
Analisis Kekasaran Permukaan Benda Kerja Hasil Pembubutan dengan Variasi Jenis Material dan Pahat Potong
The surface shape and roughness of a product produced by machine tools such as lathe plays an important role. This is due to the surface shape and roughness of the product related ...

Back to Top