Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Synthesis of Silica Gel and Development of Coating Method for Applications in a Regenerative Air Dehumidifier

View through CrossRef
In order to control humidity in air conditioning system, various desiccants are used to dehumidify air in air conditioners. One of simple methods, which can be used to coat desiccant materials on surface of heat exchanger in air conditioners, is dip coating. Typical, desiccants used in dehumidifying system is silica gel in a form of solid-state powder. This powder has low adhesion with the heat exchanger surface. To improve adhesion of the silica gel powder, some glue is generally applied on the surface of heat exchanger. The dehumidification properties of silica gel, however, will be remarkably reduced because of less surface area of silica gel powder. Instead of silica powder, this work aims to synthesize silica gel using sol-gel method, which the sol-state material can be suitably used in dip coating. In experimental study, silica gel was synthesized by sol-gel method of precursors with 1 M sulfuric acid (H2SO4). The pH was adjusted using sodium silicate solution (Na2O(SiO2)x.xH2O) and rinsing with DI water. Surface area, pore volume and size, phase composition, morphology, and percentage of moisture adsorption of the synthesized silica gel were characterized. Silica gel fabricated with pH 5 showed the highest percentage of moisture adsorption compared with other samples. In addition to the highest percentage, silica gel with pH 5 could adsorb water up to 28 times of its own weight. X-ray diffraction (XRD) results showed that Na2SO4 impurity were successfully eliminated after rinsing with DI water more than 4 times. Finally, adhesive property of silica gel on aluminium-fin samples was tested with scalloped tape-test method. It was observed that, to improve the adhesion property of silica gel on the aluminium fins, prior to dipping of silica gel, the fins should be etched with sulfuric acid. The acid can adjust the surface of fines to be much rougher.
Title: Synthesis of Silica Gel and Development of Coating Method for Applications in a Regenerative Air Dehumidifier
Description:
In order to control humidity in air conditioning system, various desiccants are used to dehumidify air in air conditioners.
One of simple methods, which can be used to coat desiccant materials on surface of heat exchanger in air conditioners, is dip coating.
Typical, desiccants used in dehumidifying system is silica gel in a form of solid-state powder.
This powder has low adhesion with the heat exchanger surface.
To improve adhesion of the silica gel powder, some glue is generally applied on the surface of heat exchanger.
The dehumidification properties of silica gel, however, will be remarkably reduced because of less surface area of silica gel powder.
Instead of silica powder, this work aims to synthesize silica gel using sol-gel method, which the sol-state material can be suitably used in dip coating.
In experimental study, silica gel was synthesized by sol-gel method of precursors with 1 M sulfuric acid (H2SO4).
The pH was adjusted using sodium silicate solution (Na2O(SiO2)x.
xH2O) and rinsing with DI water.
Surface area, pore volume and size, phase composition, morphology, and percentage of moisture adsorption of the synthesized silica gel were characterized.
Silica gel fabricated with pH 5 showed the highest percentage of moisture adsorption compared with other samples.
In addition to the highest percentage, silica gel with pH 5 could adsorb water up to 28 times of its own weight.
X-ray diffraction (XRD) results showed that Na2SO4 impurity were successfully eliminated after rinsing with DI water more than 4 times.
Finally, adhesive property of silica gel on aluminium-fin samples was tested with scalloped tape-test method.
It was observed that, to improve the adhesion property of silica gel on the aluminium fins, prior to dipping of silica gel, the fins should be etched with sulfuric acid.
The acid can adjust the surface of fines to be much rougher.

Related Results

Coating Processes of Pharmaceutical Applicability: A Glimpse
Coating Processes of Pharmaceutical Applicability: A Glimpse
Presentation of manuscript is aiming to furnish glimpse on coating processes. Coating is process of snugly covering substrate surface with coating materials (CoM). In due course co...
Intrinsic silica optical components by solgel processing
Intrinsic silica optical components by solgel processing
The unique intrinsic optical properties of new alkoxide solgels derived (type V and VI) gel silica optics are compared with types I and II fused quartz optics and types III and IV ...
Characteristic investigations on bio-silica gel prepared from teff (Eragrostis tef) straw: effect of calcination time
Characteristic investigations on bio-silica gel prepared from teff (Eragrostis tef) straw: effect of calcination time
Abstract Bio-based silica gel is having many commercial significances in various sectors, such as medical, cleansing agents in industries, laboratory analysis, cosme...
Phytolith extraction and counting procedure for modern plant material rich in silica skeletons v1
Phytolith extraction and counting procedure for modern plant material rich in silica skeletons v1
Modern plant tissues are often processed for phytolith analysis. They represent a fundamental source of comparison for archeological and palaeoenvironmental phytolith assemblages; ...

Back to Top