Javascript must be enabled to continue!
Prediction and Measurement of Rotating Stall Cells in an Axial Compressor
View through CrossRef
This paper presents a parallel numerical and experimental study of rotating stall cells in an axial compressor. Based on previous theoretical and experimental studies stressing the importance of fluid inertia and momentum exchange mechanisms in rotating stall, a numerical simulation using the Euler equations is conducted. Unsteady 2-D solutions of rotating stall behavior are obtained in a one-stage low subsonic axial compressor. The structure and speed of propagation of one fully developed rotating stall cell together with its associated unsteady static pressure and throughflow field distributions are presented. The numerical capture of a stalled flow region starting from a stable high-flow operating point with an axisymmetric flow distribution and evolving at a reduced mass flow operating point into a rotating stall pattern is also discussed.
The experimental data (flow visualization, time-averaged and unsteady row-by-row static pressure measurements) acquired in a four-stage water model of a subsonic axial compressor covers a complete characteristic line ranging from high mass flow in the stable regime to zero throughflow. Stall inception is presented together with clearly marked different operating zones within the unstable regime.
For one operating point in the unstable regime, the speed of propagation of the cell as well as the static pressure spikes at the front and rear boundaries of the rotating stall cell are compared between computations, measurements and an idealized theory based on momentum exchange between blade rows entering and leaving the stalled cell. In addition, the time-evolution of the pressure trace at the rotor/stator interface is presented.
This study seems to support the assumption that the cell structure and general mechanism of full-span rotating stall propagation are essentially governed by inertial effects and momentum exchange between the sound and stalled flow at the cell edges.
American Society of Mechanical Engineers
Title: Prediction and Measurement of Rotating Stall Cells in an Axial Compressor
Description:
This paper presents a parallel numerical and experimental study of rotating stall cells in an axial compressor.
Based on previous theoretical and experimental studies stressing the importance of fluid inertia and momentum exchange mechanisms in rotating stall, a numerical simulation using the Euler equations is conducted.
Unsteady 2-D solutions of rotating stall behavior are obtained in a one-stage low subsonic axial compressor.
The structure and speed of propagation of one fully developed rotating stall cell together with its associated unsteady static pressure and throughflow field distributions are presented.
The numerical capture of a stalled flow region starting from a stable high-flow operating point with an axisymmetric flow distribution and evolving at a reduced mass flow operating point into a rotating stall pattern is also discussed.
The experimental data (flow visualization, time-averaged and unsteady row-by-row static pressure measurements) acquired in a four-stage water model of a subsonic axial compressor covers a complete characteristic line ranging from high mass flow in the stable regime to zero throughflow.
Stall inception is presented together with clearly marked different operating zones within the unstable regime.
For one operating point in the unstable regime, the speed of propagation of the cell as well as the static pressure spikes at the front and rear boundaries of the rotating stall cell are compared between computations, measurements and an idealized theory based on momentum exchange between blade rows entering and leaving the stalled cell.
In addition, the time-evolution of the pressure trace at the rotor/stator interface is presented.
This study seems to support the assumption that the cell structure and general mechanism of full-span rotating stall propagation are essentially governed by inertial effects and momentum exchange between the sound and stalled flow at the cell edges.
Related Results
Modeling for Tip Clearance Effects on Stall-Onset Condition in Transonic Axial Compressors
Modeling for Tip Clearance Effects on Stall-Onset Condition in Transonic Axial Compressors
Rotating stall is a primary limit to compressor performance, and the reasonable estimation of stall-onset point is very useful in compressor design. Extensive investigations have b...
Numerical Investigation on the Rotating Stall Characteristics in a Three-Blade Centrifugal Impeller
Numerical Investigation on the Rotating Stall Characteristics in a Three-Blade Centrifugal Impeller
When a pump operates in part-load conditions, it is apt to form flow separations and even stall cells at the blade surfaces. In some conditions, stall cells may circumferentially p...
Stall Inception Behavior in a Centrifugal Compressor
Stall Inception Behavior in a Centrifugal Compressor
In studying the stall inception process, while most results were reported for axial compressors, the present paper investigates the stall inception behavior typified in a centrifug...
Pre-Stall Behavior of Several High-Speed Compressors
Pre-Stall Behavior of Several High-Speed Compressors
High speed compressor data immediately prior to rotating stall inception are analyzed and compared to stability theory. New techniques for the detection of small amplitude rotating...
Analysis On The Spike-type Rotating Stall For Axial Compressor By Dynamic Mode Decomposition
Analysis On The Spike-type Rotating Stall For Axial Compressor By Dynamic Mode Decomposition
In this paper, the spike-type rotating stall for axial compressor have been studied by dynamic mode decomposition. The full-wheel model with unsteady Navier-Stokes simulation is es...
Comparison of Different Stall Conditions in Axial Flow Compressor Using Analytic Wavelet Transform
Comparison of Different Stall Conditions in Axial Flow Compressor Using Analytic Wavelet Transform
Abstract
The rotating stall inception data analysis using Analytic Wavelet Transform (AWT) in a low-speed axial compressor was presented in the authors’ previous studies [1], [2]. ...
Effect Of Circumferential Total Pressure Distortion On Stability In An Axial Flow Compressor
Effect Of Circumferential Total Pressure Distortion On Stability In An Axial Flow Compressor
The effect of circumferential total pressure distortion on aerodynamic stability was experimentally investigated in an axial flow compressor. Different circumferential distorted in...
Numerical Investigation of Diffuser Rotating Stall and System Instability in a Centrifugal Compressor With Vaned Diffuser
Numerical Investigation of Diffuser Rotating Stall and System Instability in a Centrifugal Compressor With Vaned Diffuser
The operating range of a centrifugal compressor is often limited by the occurrence of the flow instability, such as diffuser rotating stall or system surge. In the paper, the unste...

