Javascript must be enabled to continue!
Morphodynamic processes of blowout on the fixed dune, China
View through CrossRef
<p>Blowout is a common landform on sandy grassland in semi-arid area and part of semi-humid area, and it is the symbol of the activation of fixed dune and the primary manifestation of desertification. This paper selected the south edge of Otingdag Sandy Land as the research area, and used WindSonic and high-precision RTK GPS to measure the airflow and topography of three blowouts with different morphology on the fixed dune. Meanwhile, combining with the image data and meteorological data,we analyzed the morphology evolution process of the three different blowouts and discussed the relationship between airflow and morphology of blowouts. The results showed that the northwest, west and southwest winds were dominant in the study area, and the west wind among them was the most frequent; The average annual wind speed tends to decrease, and the wind direction gradually tends to be stable and unidirectional, which is consistent with the direction of movement of the blowout in this area; From the air inlet to the top of the sand accumulation area, each blowout experienced the process of diffusion deceleration, convergence acceleration, separation deceleration and gradual acceleration along the long axis of the blowout, but the location that highest or lowest wind speed occurred were not the same in different blowout; The relationship between the wind direction and the long axis of blowout determines the airflow pattern inside blowouts. When the airflow diagonally enters the blowout, the airflow pattern tends to be complicated, and the deceleration and acceleration zone in blowout are obviously deviated. After the airflow enters the blowout, the wind speed and direction change obviously, which affects the spatial pattern of erosion or accumulation and further alters the morphology of the blowout. The morphology also in turn reacts on the near-surface airflow, which results in the response and feedback of the morphology and dynamics of the blowout.</p>
Title: Morphodynamic processes of blowout on the fixed dune, China
Description:
<p>Blowout is a common landform on sandy grassland in semi-arid area and part of semi-humid area, and it is the symbol of the activation of fixed dune and the primary manifestation of desertification.
This paper selected the south edge of Otingdag Sandy Land as the research area, and used WindSonic and high-precision RTK GPS to measure the airflow and topography of three blowouts with different morphology on the fixed dune.
Meanwhile, combining with the image data and meteorological data,we analyzed the morphology evolution process of the three different blowouts and discussed the relationship between airflow and morphology of blowouts.
The results showed that the northwest, west and southwest winds were dominant in the study area, and the west wind among them was the most frequent; The average annual wind speed tends to decrease, and the wind direction gradually tends to be stable and unidirectional, which is consistent with the direction of movement of the blowout in this area; From the air inlet to the top of the sand accumulation area, each blowout experienced the process of diffusion deceleration, convergence acceleration, separation deceleration and gradual acceleration along the long axis of the blowout, but the location that highest or lowest wind speed occurred were not the same in different blowout; The relationship between the wind direction and the long axis of blowout determines the airflow pattern inside blowouts.
When the airflow diagonally enters the blowout, the airflow pattern tends to be complicated, and the deceleration and acceleration zone in blowout are obviously deviated.
After the airflow enters the blowout, the wind speed and direction change obviously, which affects the spatial pattern of erosion or accumulation and further alters the morphology of the blowout.
The morphology also in turn reacts on the near-surface airflow, which results in the response and feedback of the morphology and dynamics of the blowout.
</p>.
Related Results
Modelling river dune length adaptation during variable flow conditions
Modelling river dune length adaptation during variable flow conditions
<p>River dune modelling ranges from linear stability analysis to analyse the initial growth of the dunes (Freds&#248;e, 1983) up to three dimensional numerica...
Underground Blowouts In Deep Well Drilling
Underground Blowouts In Deep Well Drilling
ABSTRACT
A kick occurs when the wellbore pressure becomes less than the formation pressure, and formation fluid enters the wellbore. When the flow of formation fl...
Contingency Planning For Offshore Blowouts
Contingency Planning For Offshore Blowouts
ABSTRACT
This paper describes requirements for blowout contingency planning with emphasis on planning for offshore blowouts. The contents are also generally appli...
Temporal resolution of echosounding measurements for assessing bedload transport rates via dune tracking
Temporal resolution of echosounding measurements for assessing bedload transport rates via dune tracking
<p>Assessment of bedload transport rates is of great importance for river morphology. Over the years, many efforts have been made to get a realistic estimate of the b...
Modelling the Influence of Vegetation on the Stochastic Dynamics of Coastal Dunes
Modelling the Influence of Vegetation on the Stochastic Dynamics of Coastal Dunes
ABSTRACT
Coastal dunes are the highest natural features on a barrier island, where they protect beach communities, infrastructure and low‐energy back‐barrier ecos...
Hierarchical organization of a Sardinian sand dune plant community
Hierarchical organization of a Sardinian sand dune plant community
Coastal sand dunes have attracted the attention of plant ecologists for over a century, but they have largely relied on correlations to explain dune plant community organization. W...
Analysis of Surface and Wellbore Hydraulics Provides Key to Efficient Blowout Control
Analysis of Surface and Wellbore Hydraulics Provides Key to Efficient Blowout Control
Abstract
Assessment of the blowout rate and composition is a key issue for decisions on the blowout control method, design of the kill operations, determination o...
Holocene stratigraphy and chronology of the Casper Dune Field, Casper, Wyoming, USA
Holocene stratigraphy and chronology of the Casper Dune Field, Casper, Wyoming, USA
Activation chronologies of dune fields within the North American Great Plains are significant sources of paleoclimate information. Although many regional chronologies exist, severa...

