Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Using a Numerical Method for Designing an Asphalt Mix with Specific Aggregate Material Properties

View through CrossRef
Abstract Common approaches for designing asphalt mixes mainly deal with the determination of the optimal percentage of the binder content, which is performed according to the volumetric properties, durability index, and strength of the produced asphalt. In this regard, laboratory results of asphalt mix designs, considering the changes in physical properties of the aggregates from production to the distribution of hot mix asphalt, highlight the need for fabrication of cyclic control specimens. The approach presented in this study allows the reduction of human mistakes during samples preparation, easy control of optimum binder content with respect to the probable changes in the aggregate sizes in each step of fabrication, transportation and implementation of the hot asphalt mix, and provide a uniform ultimate surface of the distributed asphalt. By adjusting the numerical values of the factors effective on the optimum binder percentage and constructing some statistical regression models in statistical package for the social sciences (SPSS), we obtained a set of linear equations that give the optimum binder percentage as a function of aggregate size, binder absorption, specific gravity of the mix, and specific surface of the materials. According to the results of the SPSS 23 analysis, the optimum binder content of the aggregates from 30 different mines was evaluated with respect to their grain size. Based on the obtained results and Marshall Laboratory test data, we extracted some relations for estimating the optimum binder content for hot mix asphalt. Using this method, the optimal binder content is determined using the results of the sieve analysis of the aggregates without the need for repetitive fabrication of asphalt specimens or spending a long time. Consequently, the optimal binder content for the 0–19-mm binder and 0–13-mm topcoat asphalts was determined with high accuracy.
Title: Using a Numerical Method for Designing an Asphalt Mix with Specific Aggregate Material Properties
Description:
Abstract Common approaches for designing asphalt mixes mainly deal with the determination of the optimal percentage of the binder content, which is performed according to the volumetric properties, durability index, and strength of the produced asphalt.
In this regard, laboratory results of asphalt mix designs, considering the changes in physical properties of the aggregates from production to the distribution of hot mix asphalt, highlight the need for fabrication of cyclic control specimens.
The approach presented in this study allows the reduction of human mistakes during samples preparation, easy control of optimum binder content with respect to the probable changes in the aggregate sizes in each step of fabrication, transportation and implementation of the hot asphalt mix, and provide a uniform ultimate surface of the distributed asphalt.
By adjusting the numerical values of the factors effective on the optimum binder percentage and constructing some statistical regression models in statistical package for the social sciences (SPSS), we obtained a set of linear equations that give the optimum binder percentage as a function of aggregate size, binder absorption, specific gravity of the mix, and specific surface of the materials.
According to the results of the SPSS 23 analysis, the optimum binder content of the aggregates from 30 different mines was evaluated with respect to their grain size.
Based on the obtained results and Marshall Laboratory test data, we extracted some relations for estimating the optimum binder content for hot mix asphalt.
Using this method, the optimal binder content is determined using the results of the sieve analysis of the aggregates without the need for repetitive fabrication of asphalt specimens or spending a long time.
Consequently, the optimal binder content for the 0–19-mm binder and 0–13-mm topcoat asphalts was determined with high accuracy.

Related Results

Asphalt
Asphalt
Abstract Asphalt is defined as a dark brown to black cementitious material in which the predominating constituents are bitumens that occur in nature or are obtained in pe...
Environmental Surveillance Protocols for Highly Pathogenic Avian Influenza (HPAI) v2
Environmental Surveillance Protocols for Highly Pathogenic Avian Influenza (HPAI) v2
EnvironmentalSurveillance Protocols for Highly Pathogenic Avian Influenza (HPAI) This comprehensive protocol suite enables systematic environmental surveillance for avian influenza...
Modification Mechanism and Performance of Qingchuan Rock Asphalt–Modified Asphalt
Modification Mechanism and Performance of Qingchuan Rock Asphalt–Modified Asphalt
Abstract Using Esso AH-70 asphalt as the base asphalt, the modification mechanism for Qingchuan rock asphalt–modified asphalt was studied using asphalt component tes...
Rheological and Rutting Characterization of Asphalt Mixes with Modified Binders
Rheological and Rutting Characterization of Asphalt Mixes with Modified Binders
Abstract This paper presents the results of investigations on the rheological properties of modified asphalt binders and their influence on the performance of asphal...
The Influence of a Field-Aged Asphalt Binder and Aggregates on the Skid Resistance of Recycled Hot Mix Asphalt
The Influence of a Field-Aged Asphalt Binder and Aggregates on the Skid Resistance of Recycled Hot Mix Asphalt
The application of asphalt hot mix recycling is one challenge in sustainable road pavement research. In addition to the vast amount of research on the performance of recycled aspha...
Factors Influencing the Leaching of Asphalt Components
Factors Influencing the Leaching of Asphalt Components
Abstract The main applications of asphalt involve the coating of surfaces, e.g., in roads, roofs, pipes, and linings of water basins. In all of these applications, a...
CHARACTERIZATION OF ASPHALT MODIFICATION USING GROUND RUBBER AND REACTIVE RUBBER NR-g-MA AS COMPATIBILIZER
CHARACTERIZATION OF ASPHALT MODIFICATION USING GROUND RUBBER AND REACTIVE RUBBER NR-g-MA AS COMPATIBILIZER
This study aims to improve the quality of asphalt by adding ground tyre rubber (GR) and reactive rubber (NR-g-MA) as compatibilizers of asphalt-rubber mixability. The use of GR has...

Back to Top