Javascript must be enabled to continue!
Flow of two immiscible uniformly rotating couple stress fluid layers
View through CrossRef
In this article, the flow of two uniformly rotating immiscible couple stress fluid layers is examined. In the upper layer, the flow has different velocity u1, density ρ1, viscosity ν1, couple stress viscosity γ1, and pressure p1, rotating with a constant angular velocity ω1 over another immiscible fluid layer with velocity u2, density ρ2, viscosity ν2, couple stress viscosity γ2, and pressure p2, rotating with a constant angular velocity ω2. The considered problem has a curious form, having characteristics of the famous von Karman and Bo¨dewadth flows of couple stress fluid below and above the interface, respectively. The flows are co-rotating at σ(=ω2/ω1)>0 and counter-rotating at σ<0, where σ is the ratio of angular velocities of the fluid layers. The lower layer would counter-rotate as compared to the upper layer. By utilizing similarity variables, the system of governing equations is transformed into an ordinary system. A finite-difference Keller–Box technique is applied to acquire the numerical results. For co-rotating flows (σ>0), the similarity solution exists for 0≤σ≤1, but for counter-rotating flows (σ<0), the solution exists up to some specific values of σ [i.e., σc(μ)≤σ≤1]. In the limiting cases, there are some similarities between the Bo¨dewadt problem (an outflow of fluid) and the upper layer flow and similarities between the von Karman problem (an inflow of fluid) and the lower-layer flow. The lower fluid layer shows a recirculation region of the flow near the interface, where the fluid cannot transfer.
Title: Flow of two immiscible uniformly rotating couple stress fluid layers
Description:
In this article, the flow of two uniformly rotating immiscible couple stress fluid layers is examined.
In the upper layer, the flow has different velocity u1, density ρ1, viscosity ν1, couple stress viscosity γ1, and pressure p1, rotating with a constant angular velocity ω1 over another immiscible fluid layer with velocity u2, density ρ2, viscosity ν2, couple stress viscosity γ2, and pressure p2, rotating with a constant angular velocity ω2.
The considered problem has a curious form, having characteristics of the famous von Karman and Bo¨dewadth flows of couple stress fluid below and above the interface, respectively.
The flows are co-rotating at σ(=ω2/ω1)>0 and counter-rotating at σ<0, where σ is the ratio of angular velocities of the fluid layers.
The lower layer would counter-rotate as compared to the upper layer.
By utilizing similarity variables, the system of governing equations is transformed into an ordinary system.
A finite-difference Keller–Box technique is applied to acquire the numerical results.
For co-rotating flows (σ>0), the similarity solution exists for 0≤σ≤1, but for counter-rotating flows (σ<0), the solution exists up to some specific values of σ [i.
e.
, σc(μ)≤σ≤1].
In the limiting cases, there are some similarities between the Bo¨dewadt problem (an outflow of fluid) and the upper layer flow and similarities between the von Karman problem (an inflow of fluid) and the lower-layer flow.
The lower fluid layer shows a recirculation region of the flow near the interface, where the fluid cannot transfer.
Related Results
Evaluation of Miscible Water Alternating Gas WAG Injection by Comparing with Lesson Learnt from an Immiscible Gas Injection Pilot
Evaluation of Miscible Water Alternating Gas WAG Injection by Comparing with Lesson Learnt from an Immiscible Gas Injection Pilot
Abstract
To sustain the long term production from a giant offshore reservoir, a simulation study evaluating and comparing miscible hydrocarbon (HC) Water-Alternating...
Immiscible Viscous Fingering: the Effects of Wettability/Capillarity and Scaling
Immiscible Viscous Fingering: the Effects of Wettability/Capillarity and Scaling
Abstract
Realistic immiscible viscous fingering, showing all of the complex finger structure observed in experiments, has proved to be very difficult to model using direct ...
Numerical simulation of multiphase immiscible flow on unstructured meshes
Numerical simulation of multiphase immiscible flow on unstructured meshes
The present thesis aims at developing a basis for the numerical simulation of multiphase flows of immiscible fluids. This approach, although limited by the computational power of t...
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Experimental Investigation of Permeability and Fluid Loss Properties of Water Based Mud Under High Pressure-High Temperature Conditions
Drilling in deeper formations and in high pressure and high temperature (HPHT) environments is a new frontier for the oil industry. Fifty years ago, no one would have imagined dril...
Quantifying Bypassed Oil in the Vicinity of Discontinuous Shales
Quantifying Bypassed Oil in the Vicinity of Discontinuous Shales
Abstract
We use a combination of analytic, experimental and numerical techniques to quantify flow around discontinuous shales and the extent to which they cause o...
Effects of Inlet Swirl on Endwall Film Cooling in Neighboring Vane Passages
Effects of Inlet Swirl on Endwall Film Cooling in Neighboring Vane Passages
The distribution of film cooling effectiveness of endwall film-cooling holes is considered to be periodic between neighboring high pressure turbine passages in most cascade experim...
Underground Blowouts In Deep Well Drilling
Underground Blowouts In Deep Well Drilling
ABSTRACT
A kick occurs when the wellbore pressure becomes less than the formation pressure, and formation fluid enters the wellbore. When the flow of formation fl...
Paracompact-type mappings
Paracompact-type mappings
Recently a new direction of uniform topology called the uniform topology of uniformly continuous mappings has begun to develop intensively. This direction is devoted, first of all,...

