Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Systematic Evaluation of Rigid Yoke SPM Designs for Mooring Large Offshore Floating Plants

View through CrossRef
ABSTRACT Rigid yoke Single Point Moorings (SPM's) are being designed to moor ship mounted production systems in increasingly deeper and harsher environmental conditions. Recently, new techniques in offshore production and recovery of hydrocarbons have necessitated the utilization of barge mounted facilities rather than ship mounted facilities. While the SPM's have been designed mainly for ships, several concepts can be utilized for mooring a floating production system mounted on a barge. However, because of the potentially larger wind areas of the process facilities, higher than normal loads can be expected in the SPM system. Consequently, the feasibility of these concepts needs to be reevaluated. Nearly all types of rigid yoke SPM systems designed by major SPM suppliers were tested and the results were evaluated to determine the optimum system for mooring a barge mounted methano1 production facility. Two separate model tests were performed to determine the feasibility of the various systems in both shallow and deep water during operational and survival environmental conditions. Test results plus past system experiences were used to evaluate each SPM's capability to provide a safe mooring for the floating plant. An additional important consideration was the need to reduce system downtime due to barge motion. This paper discusses the important advantages and disadvantages inherent to each of the systems tested, while pointing out necessary considerations in the evaluation of an SPM. A maximum design load prediction methodology is also outlined. INTRODUCTION Until recently, energy concerns were such that the recovery of offshore natural gas was considered uneconomical. Higher energy costs and the search for new energy sources has spurred new techniques in offshore gas recovery (Ref. 1, 2 and 3). A relatively new concept is the mooring of a barge mounted production facility near offshore production fields. The floating process plants can store and transfer refined products produced from the natural gas. In addition, the process facilities can be moved to another field after the gas fields have been depleted. A barge mounted methanol process plant capable of producing 3785 cubic meters/day was designed and engineered by Brown and Root on behalf of Litton Energy Systems. Figure 1 shows the general arrangement of the barge mounted methanol plant. In order to increase the marketability of the facilities, a mooring system had to be designed so that the barge could operate in various water depths and still survive harsh environmental conditions. A major difficulty in designing these facilities involves the determination of the proper mooring system. Single Point Moorings (SPM's) provided the most realistic approach for mooring the barge facilities. References 3, 4 and 5 give an overview of the SPM design technology. The SPM allows the barge to seek the most favorable orientation to the environment. In addition to lessening the environmental loads on the barge, overall vessel motions are also reduced. Furthermore, since the barge will normally align with the prevailing wind, it is possible to keep the 1iving quarters upwind of the production facilities. All these factors tend to increase operating time and safety of the facility.
Title: Systematic Evaluation of Rigid Yoke SPM Designs for Mooring Large Offshore Floating Plants
Description:
ABSTRACT Rigid yoke Single Point Moorings (SPM's) are being designed to moor ship mounted production systems in increasingly deeper and harsher environmental conditions.
Recently, new techniques in offshore production and recovery of hydrocarbons have necessitated the utilization of barge mounted facilities rather than ship mounted facilities.
While the SPM's have been designed mainly for ships, several concepts can be utilized for mooring a floating production system mounted on a barge.
However, because of the potentially larger wind areas of the process facilities, higher than normal loads can be expected in the SPM system.
Consequently, the feasibility of these concepts needs to be reevaluated.
Nearly all types of rigid yoke SPM systems designed by major SPM suppliers were tested and the results were evaluated to determine the optimum system for mooring a barge mounted methano1 production facility.
Two separate model tests were performed to determine the feasibility of the various systems in both shallow and deep water during operational and survival environmental conditions.
Test results plus past system experiences were used to evaluate each SPM's capability to provide a safe mooring for the floating plant.
An additional important consideration was the need to reduce system downtime due to barge motion.
This paper discusses the important advantages and disadvantages inherent to each of the systems tested, while pointing out necessary considerations in the evaluation of an SPM.
A maximum design load prediction methodology is also outlined.
INTRODUCTION Until recently, energy concerns were such that the recovery of offshore natural gas was considered uneconomical.
Higher energy costs and the search for new energy sources has spurred new techniques in offshore gas recovery (Ref.
1, 2 and 3).
A relatively new concept is the mooring of a barge mounted production facility near offshore production fields.
The floating process plants can store and transfer refined products produced from the natural gas.
In addition, the process facilities can be moved to another field after the gas fields have been depleted.
A barge mounted methanol process plant capable of producing 3785 cubic meters/day was designed and engineered by Brown and Root on behalf of Litton Energy Systems.
Figure 1 shows the general arrangement of the barge mounted methanol plant.
In order to increase the marketability of the facilities, a mooring system had to be designed so that the barge could operate in various water depths and still survive harsh environmental conditions.
A major difficulty in designing these facilities involves the determination of the proper mooring system.
Single Point Moorings (SPM's) provided the most realistic approach for mooring the barge facilities.
References 3, 4 and 5 give an overview of the SPM design technology.
The SPM allows the barge to seek the most favorable orientation to the environment.
In addition to lessening the environmental loads on the barge, overall vessel motions are also reduced.
Furthermore, since the barge will normally align with the prevailing wind, it is possible to keep the 1iving quarters upwind of the production facilities.
All these factors tend to increase operating time and safety of the facility.

Related Results

Exposed Location Single Buoy Mooring
Exposed Location Single Buoy Mooring
ABSTRACT Since 1961 Single Point Moorings (SPM's) have been used successfully in nearly all parts of the world. Nevertheless the feasibility of ...
Numerical and Experimental Study of Mooring Systems with Clump Weights for Floating Wind Turbines
Numerical and Experimental Study of Mooring Systems with Clump Weights for Floating Wind Turbines
The transition towards a low-carbon economy is emerging as one of the most pressing challenges of our era. Among the various sustainable technologies, offshore wind energy stands o...
Comparative Evaluation Of Disconnectable And Permanent Moorings For Fpsoâ??S In Harsh Environments
Comparative Evaluation Of Disconnectable And Permanent Moorings For Fpsoâ??S In Harsh Environments
ABSTRACT This paper discusses the factors that operators considering FPSO developments in harsh environments should evaluate when selecting between a permanent or...
Evaluation of Advanced Fibers for Deepwater Synthetic Fiber Mooring Systems
Evaluation of Advanced Fibers for Deepwater Synthetic Fiber Mooring Systems
Abstract Mooring systems utilizing polyester ropes have facilitated exploration and production of deepwater fields and represent a step-change in mooring system d...
Dynamic Response of a SPAR-Type Floating Wind Turbine Foundation with Taut Mooring System
Dynamic Response of a SPAR-Type Floating Wind Turbine Foundation with Taut Mooring System
Compared with the traditional catenary or semi-taut mooring lines, the taut mooring system is more advantageous in many aspects, such as reduction of mooring line loads, erosion an...
Dynamic Positioning in Single-Point Moorings
Dynamic Positioning in Single-Point Moorings
ABSTRACT This paper deals with the concept of and a system for complete control of the slowly varying bow motion of a bow-moored ship using dynamic positioning. ...
Design Development of a Soft-Yoke Mooring System for the S236-1 Field in Liaodong Bay, China
Design Development of a Soft-Yoke Mooring System for the S236-1 Field in Liaodong Bay, China
ABSTRACT The Suizhong 36-1 (SZ 36-1) Oil Field in northern Bohai Bay in about 30m. water depth is a giant offshore oil fie1d with estimated reserves of 1.2 billio...
Mooring Safety Assessment Using Reliability Techniques
Mooring Safety Assessment Using Reliability Techniques
ABSTRACT The paper deals with the reliability of offshore mooring systems. Reliability techniques have been applied to assess mooring systems designed by the quas...

Back to Top