Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Hydrocyclones: A Solution to Produced Water Treatment

View through CrossRef
ABSTRACT In light of the progression into deeper water and more hostile environments in the search for new oil and gas reserves, an increasing demand is being placed upon industry to develop lighter, more compact and more efficient process equipment to replace their traditional counterparts. A recent application of cyclone technology for liquid-liquid separation of oil from produced water has shown considerable promise during extensive field testing. This paper outlines the basic construction and principle of operation of the de-oiling hydrocyclone and discusses system design, early operational experiences and test results from the first full scale commercial application of the 4 in 1 hydrocyclone concept on Conoco's Murchison Platform. In addition, and of perhaps more significance, early results from field tests of the larger 60mm cyclones on the Hutton TLP, where conventional equipment was adversely effected by platform motion are discussed. INTRODUCTION Produced water represents an increasing portion of the total produced fluids as time progresses in a field's life. Although offering no direct economic incentive, a considerable portion of both engineering and operations time is spent modifying and maintaining produced water clean up systems to ensure satisfactory operation. In the case of the Murchison field, although the existing system performed adequately, albeit through labour intensive operation, optimum reservoir development required water injection capacity beyond the original design basis. Consequently this created the need to upgrade the capacity of the produced water treatment system. A similar upgrade in water handling capacity was required for the Hutton field, but more importantly the platform could not achieve the U.K. Department of Energy specification for overboard effluent of 40 ppm with the originally installed equipment. Investigations into alternatives to the traditional flotation cells/plate separators for oily-water clean up revealed that the hydrocyclone separator warranted serious consideration. Conoco's first experiences with hydrocyclones was with pilot plant trials of the Serck-Baker Oilspin developed as a result of an extensive research program conducted at Southampton University. While these tests which were carried out on the Murchison and Hutton platforms in early 1985 were not an unqualified success, they demonstrated the equipments potential and Conoco was sufficiently encouraged to commit to the first full-scale commercial application of the 'Vortoil' 4 in 1 35mm hydrocyclone later that year. The 'Vortoil' hydrocyclone developed by BWN, an Australian company, but still based on the original " Southampton design was considered to be a more refined and advanced product not only capable of achieving the required performance but also as a means of reducing the nurse maid attention associated with more traditional equipment. The many operational advantages of 'Vortoil' make it ideally suited for a retro-fit situation. However, the true worth of hydrocyclone technology should be realised on future marginal developments where space and weight are a premium and on floating structures like the Hutton TLP where motion sensitivity is a problem.
Title: Hydrocyclones: A Solution to Produced Water Treatment
Description:
ABSTRACT In light of the progression into deeper water and more hostile environments in the search for new oil and gas reserves, an increasing demand is being placed upon industry to develop lighter, more compact and more efficient process equipment to replace their traditional counterparts.
A recent application of cyclone technology for liquid-liquid separation of oil from produced water has shown considerable promise during extensive field testing.
This paper outlines the basic construction and principle of operation of the de-oiling hydrocyclone and discusses system design, early operational experiences and test results from the first full scale commercial application of the 4 in 1 hydrocyclone concept on Conoco's Murchison Platform.
In addition, and of perhaps more significance, early results from field tests of the larger 60mm cyclones on the Hutton TLP, where conventional equipment was adversely effected by platform motion are discussed.
INTRODUCTION Produced water represents an increasing portion of the total produced fluids as time progresses in a field's life.
Although offering no direct economic incentive, a considerable portion of both engineering and operations time is spent modifying and maintaining produced water clean up systems to ensure satisfactory operation.
In the case of the Murchison field, although the existing system performed adequately, albeit through labour intensive operation, optimum reservoir development required water injection capacity beyond the original design basis.
Consequently this created the need to upgrade the capacity of the produced water treatment system.
A similar upgrade in water handling capacity was required for the Hutton field, but more importantly the platform could not achieve the U.
K.
Department of Energy specification for overboard effluent of 40 ppm with the originally installed equipment.
Investigations into alternatives to the traditional flotation cells/plate separators for oily-water clean up revealed that the hydrocyclone separator warranted serious consideration.
Conoco's first experiences with hydrocyclones was with pilot plant trials of the Serck-Baker Oilspin developed as a result of an extensive research program conducted at Southampton University.
While these tests which were carried out on the Murchison and Hutton platforms in early 1985 were not an unqualified success, they demonstrated the equipments potential and Conoco was sufficiently encouraged to commit to the first full-scale commercial application of the 'Vortoil' 4 in 1 35mm hydrocyclone later that year.
The 'Vortoil' hydrocyclone developed by BWN, an Australian company, but still based on the original " Southampton design was considered to be a more refined and advanced product not only capable of achieving the required performance but also as a means of reducing the nurse maid attention associated with more traditional equipment.
The many operational advantages of 'Vortoil' make it ideally suited for a retro-fit situation.
However, the true worth of hydrocyclone technology should be realised on future marginal developments where space and weight are a premium and on floating structures like the Hutton TLP where motion sensitivity is a problem.

Related Results

Water Trash Collector
Water Trash Collector
In today day to day life, approximately 71% of the Earth's surface is covered by Without affecting significant role that technology plays in our modern world, environmental and wat...
Modelling and Performance Analysis of Hydrocyclones: The Case of Buzwagi Gold Mine
Modelling and Performance Analysis of Hydrocyclones: The Case of Buzwagi Gold Mine
The performance of hydrocyclones at Buzwagi Gold Mine (BGM) was investigated in three full scale survey campaigns. Thereafter, several empirical and theoretical hydrocyclone models...
Techniques of Reinjecting 100% of Produced Water in Daqing Oil Field
Techniques of Reinjecting 100% of Produced Water in Daqing Oil Field
Abstract In the history of over 40 years of development, Daqing Oilfield has witnessed three phases of development: basic well pattern, infill well pattern, and tert...
Procedure for Western blot v1
Procedure for Western blot v1
Goal: This document has the objective of standardizing the protocol for Western blot. This technique allows the detection of specific proteins separated on polyacrylamide gel and t...
Integrated hydrological modelling for sustainable water allocation planning : Mkomazi Basin, South Africa case study
Integrated hydrological modelling for sustainable water allocation planning : Mkomazi Basin, South Africa case study
Allocation of freshwater resources between societal needs and natural ecological systems is of great concern for water managers. This development has challenged decision-makers reg...
Sustainable Reuse of Produced Water Treatment Waste in Drilling Operations
Sustainable Reuse of Produced Water Treatment Waste in Drilling Operations
Abstract In oil and gas explorations, produced water is generated from subsurface reservoirs along with crude oil and gas. The produced water gets separated from hyd...

Back to Top