Impact of Compaction Parameters and Techniques on MUPS Tablets

Background/Objectives: Compaction of sustained release coated pellets into tablets is associated with damage to the functional coat and loss in sustained release. The influences of precompression, trilayering, and tableting rate on the compaction of sustained release coated pellets into tablets are not well defined and were herein investigated to enhance the current limited understanding of these factors. Methods: Pellets coated with acrylic polymer (AC) or ethylcellulose (EC) were combined with filler material and compacted into multi-unit pellet system (MUPS) tablets prepared using different levels of precompression, as a trilayered MUPS tablet and at different tableting rates. The physical properties of the resulting MUPS tablets were evaluated. Trilayering was achieved by adding cushioning layers at the top and bottom of the MUPS tablet to avoid direct contact of pellets with punch surfaces. Results: With precompression, slightly stronger MUPS tablets were made compared to the tablets without precompression for EC pellets but not AC pellets. However, precompression led to a slight reduction in pellet coat damage for AC pellets but not EC pellets. Trilayering led to significant reductions in pellet coat damage and significant increases in tablet tensile strength. When EC pellets were lubricated with sodium stearyl fumarate, pellet coat damage was significantly lower. Increasing the tableting rate from 20 to 100 rpm did not result in increased pellet coat damage but in significantly weaker tablets due to the shorter dwell time. Conclusions: This study provides key insights on how compaction parameters and techniques could be altered to produce better MUPS tablets.