Javascript must be enabled to continue!
Experimental studies of the effectiveness of masonry reinforcement by mortar injection
View through CrossRef
Introduction
. Pressure injection of masonry is one of the most effective methods for restoring its integrity in areas with cracks, delamination, repairs, and joints between dissimilar masonry. This injection method is especially valuable for historic buildings.
Aim
. To obtain experimental data on the strength and deformations of masonry reinforced by pressure injection of mortar.
Materials and methods
. Tests were conducted on specimens reinforced with mortar injection, including those with structural reinforcement, under uniformly distributed loads and localized compression, using historical and modern solid brick in the form of pillars and walls, constructed with mortars of varying strengths. The combined performance of reinforced masonry in repair sections with filler and specimens in which the inner layer (backfill) differed in strength and deformation from the facing layers was studied.
Results
. Strengthening coefficients for masonry reinforced by pressure injection were obtained. The research results were used in the development of regulatory documents for masonry structures and recommendations and projects for strengthening masonry structures, including historic buildings.
Conclusions
. In cases of multiple cracks in masonry spaced 10–25 cm apart, it is possible to increase the load-bearing capacity of the masonry. The effectiveness of reinforcement increases for masonry constructed with weak mortars. The best results are achieved with epoxy resin injection. The use of cement mortars with hydraulic lime allows for the restoration of the integrity of masonry in historic buildings. A combination of injection reinforcement and indirect reinforcement using drilled holes in the masonry produces significant results.
Joint Stock Company Research Center of Construction
Title: Experimental studies of the effectiveness of masonry reinforcement by mortar injection
Description:
Introduction
.
Pressure injection of masonry is one of the most effective methods for restoring its integrity in areas with cracks, delamination, repairs, and joints between dissimilar masonry.
This injection method is especially valuable for historic buildings.
Aim
.
To obtain experimental data on the strength and deformations of masonry reinforced by pressure injection of mortar.
Materials and methods
.
Tests were conducted on specimens reinforced with mortar injection, including those with structural reinforcement, under uniformly distributed loads and localized compression, using historical and modern solid brick in the form of pillars and walls, constructed with mortars of varying strengths.
The combined performance of reinforced masonry in repair sections with filler and specimens in which the inner layer (backfill) differed in strength and deformation from the facing layers was studied.
Results
.
Strengthening coefficients for masonry reinforced by pressure injection were obtained.
The research results were used in the development of regulatory documents for masonry structures and recommendations and projects for strengthening masonry structures, including historic buildings.
Conclusions
.
In cases of multiple cracks in masonry spaced 10–25 cm apart, it is possible to increase the load-bearing capacity of the masonry.
The effectiveness of reinforcement increases for masonry constructed with weak mortars.
The best results are achieved with epoxy resin injection.
The use of cement mortars with hydraulic lime allows for the restoration of the integrity of masonry in historic buildings.
A combination of injection reinforcement and indirect reinforcement using drilled holes in the masonry produces significant results.
Related Results
Improvement of seismic performance of ordinary reinforced partially grouted concrete masonry shear walls
Improvement of seismic performance of ordinary reinforced partially grouted concrete masonry shear walls
Reinforced masonry constitutes about 10% of all low-rise construction in the US. Most of these structures are commercial and school buildings. It may also be used for multi-story h...
Diagonal Shear Strength of Masonry Wall Using Mortar Joints Mixed with Rubber Tire Crumbs and Fly Ash
Diagonal Shear Strength of Masonry Wall Using Mortar Joints Mixed with Rubber Tire Crumbs and Fly Ash
Recently, a lot of research has been developed to determine the usefulness of mortar mixed with rubber tire crumbs, which is often called RTC mortar. The advantages of RTC mortar a...
Stress and strain studies of historical masonry
Stress and strain studies of historical masonry
Introduction
. Brick masonry of historical buildings has a number of features compared to masonry made of contemporary materials. This applies to both strength ...
EXPERIMENTAL IN-PLANE COMPRESSION TEST OF BRICK MASONRY WALLS WITH REINFORCEMENT RATIO
EXPERIMENTAL IN-PLANE COMPRESSION TEST OF BRICK MASONRY WALLS WITH REINFORCEMENT RATIO
Perforated clay brick masonry is a popular and widely used construction, offering both structural and aesthetic benefits. The structural behavior of perforated clay brick masonry w...
Investigating residual properties of masonry units at elevated temperatures
Investigating residual properties of masonry units at elevated temperatures
Masonry structures are renowned globally for their strength, durability, affordability, and thermal and sound insulation properties. However, there is limited information on the re...
Brick masonry reinforcement with methyl methacrylate injection
Brick masonry reinforcement with methyl methacrylate injection
Introduction. Structural reinforcement of brick and stone masonry by grouting materials under pressure is an efficient approach to restoring the masonry integrity, and, in some cas...
PERANCANGAN ALAT UJI TARIK MORTAR MENGGUNAKAN TENAGA PENGGERAK MOTOR LISTRIK
PERANCANGAN ALAT UJI TARIK MORTAR MENGGUNAKAN TENAGA PENGGERAK MOTOR LISTRIK
ABSTRACTMechanic characteristics of hard mortar are: compressive strength, flexural strength, tensile strength, and adhesion power. In the meantime, at Building Material Laboratory...
STUDI KARAKTERISTIK BATA MERAH LOKAL BALI SEBAGAI DINDING
STUDI KARAKTERISTIK BATA MERAH LOKAL BALI SEBAGAI DINDING
Abstract : This study was conducted to determine the characteristics of brick red walls. Red brick taken from a local brick manufacturer Gianyar, Tabanan and Negara refer to SNI 1...

