Javascript must be enabled to continue!
Understanding Mono- and Bivalent Ion Selectivities of Nanoporous Graphene Using Ionic and Bi-ionic Potentials
View through CrossRef
Abstract
Nanoporous graphene displays salt-dependent ion permeation. In this work, we investigate the differences in Donnan potentials arising between reservoirs, separated by a perforated graphene membrane, containing different cations. We compare the case of monovalent cations interacting with nanoporous graphene with the case of bivalent cations. This is accomplished through both measurements of membrane potential arising between two salt reservoirs at different concentrations involving a single cation (ionic potential) and between two reservoirs containing different cations at the same concentration (bi-ionic potential). In our present study, Donnan dialysis experiments involve bivalent MgCl2, CaCl2, and CuCl2 as well as monovalent KCl and NH4Cl salts. For all salts, except CuCl2, clear Donnan and diffusion potential plateaus were observed at low and high salt concentrations, respectively. Our observations show that the membrane potential scaled to the Nernst potential for bivalent cations has a lower value (≈50%) than for monovalent cations (≈72%) in the Donnan exclusion regime. This is likely due to the adsorption of these bivalent cations on monolayer graphene. For bivalent cations, the diffusion regime is reached at a lower ionic strength compared to the monovalent cations. For Mg2+ and Ca2+, the membrane potential does not seem to depend upon the type of ions in the entire ionic strength range. A similar behavior is observed for the KCl and NH4Cl membrane potential curves. For CuCl2, the membrane potential curve is shifted toward lower ionic strength compared to the other two bivalent salts and the Donnan plateau is not observed at the lowest ionic strength. Bi-ionic potential measurements give further insight into the strength of specific interactions, allowing for the estimation of the relative ionic selectivities of different cations based on comparing their bi-ionic potentials. This effect of possible ion adsorption on graphene can be removed through ion exchange with monovalent salts.
American Chemical Society (ACS)
Title: Understanding Mono- and Bivalent Ion Selectivities
of Nanoporous Graphene Using Ionic and Bi-ionic Potentials
Description:
Abstract
Nanoporous graphene displays salt-dependent ion permeation.
In this work, we investigate the differences in Donnan potentials arising between reservoirs, separated by a perforated graphene membrane, containing different cations.
We compare the case of monovalent cations interacting with nanoporous graphene with the case of bivalent cations.
This is accomplished through both measurements of membrane potential arising between two salt reservoirs at different concentrations involving a single cation (ionic potential) and between two reservoirs containing different cations at the same concentration (bi-ionic potential).
In our present study, Donnan dialysis experiments involve bivalent MgCl2, CaCl2, and CuCl2 as well as monovalent KCl and NH4Cl salts.
For all salts, except CuCl2, clear Donnan and diffusion potential plateaus were observed at low and high salt concentrations, respectively.
Our observations show that the membrane potential scaled to the Nernst potential for bivalent cations has a lower value (≈50%) than for monovalent cations (≈72%) in the Donnan exclusion regime.
This is likely due to the adsorption of these bivalent cations on monolayer graphene.
For bivalent cations, the diffusion regime is reached at a lower ionic strength compared to the monovalent cations.
For Mg2+ and Ca2+, the membrane potential does not seem to depend upon the type of ions in the entire ionic strength range.
A similar behavior is observed for the KCl and NH4Cl membrane potential curves.
For CuCl2, the membrane potential curve is shifted toward lower ionic strength compared to the other two bivalent salts and the Donnan plateau is not observed at the lowest ionic strength.
Bi-ionic potential measurements give further insight into the strength of specific interactions, allowing for the estimation of the relative ionic selectivities of different cations based on comparing their bi-ionic potentials.
This effect of possible ion adsorption on graphene can be removed through ion exchange with monovalent salts.
Related Results
On-Surface Synthesis of Variable Bandgap Nanoporous Graphene
On-Surface Synthesis of Variable Bandgap Nanoporous Graphene
Tuning the bandgap of nanoporous graphene
is desirable for applications such as the charge transport layer in
organic-hybrid devices. The holy grail in the field is the ability t...
On‐Surface Synthesis of Variable Bandgap Nanoporous Graphene
On‐Surface Synthesis of Variable Bandgap Nanoporous Graphene
Abstract
Tuning the bandgap of nanoporous graphene is desirable for applications such as the charge transport layer in organic‐hybrid devices. The holy grail in t...
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Simulation of interaction behavior between dislocation and graphene during nanoindentation of graphene/aluminum matrix nanocomposites
Graphene has been thought to be an ideal reinforcement material for metal matrix composite due to its superior mechanical properties and unique two-dimensional geometry. However, t...
CVD-Grown Graphene Modified with Aryl Groups by Electroreduction of Corresponding Diazonium Salts
CVD-Grown Graphene Modified with Aryl Groups by Electroreduction of Corresponding Diazonium Salts
Graphene has been widely studied material because of its interesting properties (for example large surface area, high conductivity, good mechanical, electronic, optical, thermal an...
Characterization and preliminary application of top-gated graphene ion-sensitive field effect transistors
Characterization and preliminary application of top-gated graphene ion-sensitive field effect transistors
Graphene, a 2-dimensional material, has received increasing attention due to its unique physicochemical properties (high surface area, excellent conductivity, and high mechanical s...
Preparation of Graphene Fibers
Preparation of Graphene Fibers
Graphene owns intriguing properties in electronic, thermal, and mechanic with unique two-dimension (2D) monolayer structure. The new member of carbon family has not only attracted ...
Raman Spectroscopy Imaging of Exceptional Electronic Properties in Epitaxial Graphene Grown on SiC
Raman Spectroscopy Imaging of Exceptional Electronic Properties in Epitaxial Graphene Grown on SiC
Graphene distinctive electronic and optical properties have sparked intense interest throughout the scientific community bringing innovation and progress to many sectors of academi...
Scalable techniques for graphene on glass
Scalable techniques for graphene on glass
The combination of unique properties -high electrical mobility, thermal conductivity, transparency and mechanical flexibility- make graphene promising for a wide variety of applica...

