Javascript must be enabled to continue!
Cosmic-ray induced sputtering of interstellar formaldehyde ices
View through CrossRef
Context. In the cold and dense regions of the interstellar medium (ISM), for example in prestellar cores, gas-phase chemical abundances undergo a steep decrease due to the freeze-out of molecules onto the dust grain surfaces. While the depletion of many species would bring molecular abundances to undetected levels within short timescales, non-thermal desorption mechanisms such as UV photodesorption or cosmic-ray sputtering allows the return of a fraction of the ice mantle species back to the gas phase and prevents a complete freeze-out in the densest regions. In the last decade much effort has been devoted to understanding the microphysics of desorption and quantifying molecular desorption yields.
Aims. H2CO is a ubiquitous molecule in the ISM and in the gas phase of prestellar cores, and is likely present in ice mantles, but its main desorption mechanism is unknown. In this paper our aim is to quantify the desorption efficiency of H2CO upon cosmic-ray impact in order to determine whether cosmic-ray induced sputtering could account for the H2CO abundance observed in prestellar cores.
Methods. Using a heavy-ion beam as a cosmic-ray analogue at the Grand Accélérateur National d’Ions Lourds (GANIL) accelerator, we irradiated pure H2CO ice films at 10 K under high vacuum conditions and monitored the ice film evolution with infrared spectroscopy and the composition of the sputtered species in the gas phase using mass spectrometry. We derived both the effective and intact sputtering yield of pure H2CO ices. In addition, using IRAM millimetre observations, we also determined the H2CO gas-phase abundance in the prestellar core L1689B.
Results. We find that H2CO easily polymerises under heavy-ion irradiation in the ice, and is also radiolysed into CO and CO2. In the gas phase, the dominant sputtered species is CO and intact H2CO is only a minor species. We determine an intact sputtering yield for pure H2CO ices of 2.5 × 103 molecules ion−1 for an electronic stopping power of Se ∼ 2830 eV (1015 molecules cm−2)−1. The corresponding cosmic-ray sputtering rate is ΓCRD = 1.5 × 1018ζ molecules cm−2 s−1, where ζ is the rate of cosmic-ray ionisation of molecular hydrogen in the ISM. In the frame of a simple steady-state chemical model of freeze-out and non-thermal desorption, we find that this experimental cosmic-ray sputtering rate is too low (by an order of magnitude) to account for the observed H2CO gas-phase abundance we derived in the prestellar core L1689B. We find however that this abundance can be reproduced if we assume that H2CO diluted in CO or CO2 ices co-desorbs at the same sputtering rate as pure CO or pure CO2 ices.
Title: Cosmic-ray induced sputtering of interstellar formaldehyde ices
Description:
Context.
In the cold and dense regions of the interstellar medium (ISM), for example in prestellar cores, gas-phase chemical abundances undergo a steep decrease due to the freeze-out of molecules onto the dust grain surfaces.
While the depletion of many species would bring molecular abundances to undetected levels within short timescales, non-thermal desorption mechanisms such as UV photodesorption or cosmic-ray sputtering allows the return of a fraction of the ice mantle species back to the gas phase and prevents a complete freeze-out in the densest regions.
In the last decade much effort has been devoted to understanding the microphysics of desorption and quantifying molecular desorption yields.
Aims.
H2CO is a ubiquitous molecule in the ISM and in the gas phase of prestellar cores, and is likely present in ice mantles, but its main desorption mechanism is unknown.
In this paper our aim is to quantify the desorption efficiency of H2CO upon cosmic-ray impact in order to determine whether cosmic-ray induced sputtering could account for the H2CO abundance observed in prestellar cores.
Methods.
Using a heavy-ion beam as a cosmic-ray analogue at the Grand Accélérateur National d’Ions Lourds (GANIL) accelerator, we irradiated pure H2CO ice films at 10 K under high vacuum conditions and monitored the ice film evolution with infrared spectroscopy and the composition of the sputtered species in the gas phase using mass spectrometry.
We derived both the effective and intact sputtering yield of pure H2CO ices.
In addition, using IRAM millimetre observations, we also determined the H2CO gas-phase abundance in the prestellar core L1689B.
Results.
We find that H2CO easily polymerises under heavy-ion irradiation in the ice, and is also radiolysed into CO and CO2.
In the gas phase, the dominant sputtered species is CO and intact H2CO is only a minor species.
We determine an intact sputtering yield for pure H2CO ices of 2.
5 × 103 molecules ion−1 for an electronic stopping power of Se ∼ 2830 eV (1015 molecules cm−2)−1.
The corresponding cosmic-ray sputtering rate is ΓCRD = 1.
5 × 1018ζ molecules cm−2 s−1, where ζ is the rate of cosmic-ray ionisation of molecular hydrogen in the ISM.
In the frame of a simple steady-state chemical model of freeze-out and non-thermal desorption, we find that this experimental cosmic-ray sputtering rate is too low (by an order of magnitude) to account for the observed H2CO gas-phase abundance we derived in the prestellar core L1689B.
We find however that this abundance can be reproduced if we assume that H2CO diluted in CO or CO2 ices co-desorbs at the same sputtering rate as pure CO or pure CO2 ices.
Related Results
Cosmic-ray propagation in the bi-stable interstellar medium
Cosmic-ray propagation in the bi-stable interstellar medium
Context. Cosmic rays propagate through the galactic scales down to the smaller scales at which stars form. Cosmic rays are close to energy equipartition with the other components o...
PR-312-12206-R01 FTIR Formaldehyde Measurement at Turbine NESHAP and Ambient Levels
PR-312-12206-R01 FTIR Formaldehyde Measurement at Turbine NESHAP and Ambient Levels
Since formaldehyde is ubiquitous (e.g., naturally formed through atmospheric chemistry even if not directly emitted), there is also the potential that atmospheric levels and atmosp...
Improving Efficiency and Power Density of Hydrogen Engines of Positive Ignition Single-Fuel and Compression Ignition Dual-Fuel designs
Improving Efficiency and Power Density of Hydrogen Engines of Positive Ignition Single-Fuel and Compression Ignition Dual-Fuel designs
The latest advances in power density and efficiency of internal combustion engines (ICEs), both diesel direct injection (DI) compression ignition (CI), and gasoline positive igniti...
Hidden formaldehyde in cosmetic products
Hidden formaldehyde in cosmetic products
AbstractBackgroundFormaldehyde is a common cause of contact allergy. Hidden formaldehyde, that is, formaldehyde in products without formaldehyde releasers, has previously been dete...
Spectral study of salty ice analogue samples relevant for icy moons
Spectral study of salty ice analogue samples relevant for icy moons
Introduction:  Telescopic and spacecraft observations of the surfaces of Jupiter’s icy moons have provided information on their composition, mostly from the spec...
Freshness and Contamination with Formalin of Mackerel marketed in Dar es Salaam
Freshness and Contamination with Formalin of Mackerel marketed in Dar es Salaam
Abstract
Background
Fish constitutes a nutritious food that deteriorates quickly when poorly preserved. Several biochemicals, including formaldehyde, naturally accumulate i...
Fabrication and excellent formaldehyde Gas sensing properties of Yb-doped In2O3 nanotubes
Fabrication and excellent formaldehyde Gas sensing properties of Yb-doped In2O3 nanotubes
Pure and Yb-doped In2O3 nanotubes have been successfully fabricated by using the single-capillary electrospinning method, followed by calcination. The morphological and structural ...
Formaldehyde Exposure and Human Health Risks
Formaldehyde Exposure and Human Health Risks
Abstract
This chapter primarily focuses on the human health effects of formaldehyde inhalation exposure. It summarizes significant published findings and recently...

