Javascript must be enabled to continue!
Electrochemical sensing at nanoporous film‐coated electrodes
View through CrossRef
Abstract
In this paper, we highlight the uniqueness of nanoporous film‐coated electrodes as electrochemical sensing platforms. Specifically, we focus on discussing electrodes coated with insulator‐based monolithic films comprising vertically‐oriented, rigid cylindrical nanopores of uniform diameters (2–200 nm). The electrode coating results in the formation of an array of recessed nanodisk electrodes, and thus we named them recessed nanodisk‐array electrodes (RNEs). We first summarize the properties of nanoporous films commonly used for RNE fabrication, including nanoporous anodic alumina membranes, track‐etched polymer membranes, block copolymer‐derived nanoporous films, and mesoporous silica films. Subsequently, we discuss representative works that take advantage of the uniform size/shape of the nanopores for enhancing electrochemical detection selectivity and sensitivity. RNE‐based sensors measure faradaic currents from redox‐active analytes or exogenously‐added electroactive species that penetrate through the nanopores, or those from redox‐active moieties tethered to the surface of the nanopores or underlying electrodes. The enhanced detection selectivity of these sensors is attributed to the preferential partitioning of analytes into the nanopores or steric/electrostatic exclusion of interfering species. In particular, the uniform sizes/shapes of RNE nanopores play key roles in their higher molecular sieving selectivity and also in the better control of the detection selectivity based on electrostatic/chemical interactions. The detection sensitivity of RNE‐based sensors can be improved by tailoring the chemical environments of the nanopores for analyte preconcentration or for steric/electrostatic manipulation of the dynamics of redox‐tagged binding moieties. These unique characteristics of RNEs, in addition to the mitigation of electrode fouling by the nanoporous films, will enable the development of pretreatment‐free electrochemical sensors for complex matrix solutions.
Title: Electrochemical sensing at nanoporous film‐coated electrodes
Description:
Abstract
In this paper, we highlight the uniqueness of nanoporous film‐coated electrodes as electrochemical sensing platforms.
Specifically, we focus on discussing electrodes coated with insulator‐based monolithic films comprising vertically‐oriented, rigid cylindrical nanopores of uniform diameters (2–200 nm).
The electrode coating results in the formation of an array of recessed nanodisk electrodes, and thus we named them recessed nanodisk‐array electrodes (RNEs).
We first summarize the properties of nanoporous films commonly used for RNE fabrication, including nanoporous anodic alumina membranes, track‐etched polymer membranes, block copolymer‐derived nanoporous films, and mesoporous silica films.
Subsequently, we discuss representative works that take advantage of the uniform size/shape of the nanopores for enhancing electrochemical detection selectivity and sensitivity.
RNE‐based sensors measure faradaic currents from redox‐active analytes or exogenously‐added electroactive species that penetrate through the nanopores, or those from redox‐active moieties tethered to the surface of the nanopores or underlying electrodes.
The enhanced detection selectivity of these sensors is attributed to the preferential partitioning of analytes into the nanopores or steric/electrostatic exclusion of interfering species.
In particular, the uniform sizes/shapes of RNE nanopores play key roles in their higher molecular sieving selectivity and also in the better control of the detection selectivity based on electrostatic/chemical interactions.
The detection sensitivity of RNE‐based sensors can be improved by tailoring the chemical environments of the nanopores for analyte preconcentration or for steric/electrostatic manipulation of the dynamics of redox‐tagged binding moieties.
These unique characteristics of RNEs, in addition to the mitigation of electrode fouling by the nanoporous films, will enable the development of pretreatment‐free electrochemical sensors for complex matrix solutions.
Related Results
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
Reclaiming the Wasteland: Samson and Delilah and the Historical Perception and Construction of Indigenous Knowledges in Australian Cinema
It was always based on a teenage love story between the two kids. One is a sniffer and one is not. It was designed for Central Australia because we do write these kids off there. N...
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
Structured 3D Printed Dry ECG Electrodes Using Copper Based Filament
Commercial wet Silver and Silver Chloride electrodes are used to monitor electrocardiogram (ECG) signals in numerous bioimpedance applications. These electrodes are frequently sing...
Spray Coated Nanocellulose Films Productions, Characterization and Application
Spray Coated Nanocellulose Films Productions, Characterization and Application
Nanocellulose (NC) is a biodegradable, renewable and sustainable material. It has strong potential to use as a functional material in various applications such as barriers, coating...
Novel Measurement Method for Distinction between Electronic and Ionic Conductivity in Composite Electrodes
Novel Measurement Method for Distinction between Electronic and Ionic Conductivity in Composite Electrodes
Composite electrodes containing active materials, carbon and binder are widely used in Li-ion batteries. It is well known that their morphology influences the electrochemical perfo...
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Alternative Entrances: Phillip Noyce and Sydney’s Counterculture
Phillip Noyce is one of Australia’s most prominent film makers—a successful feature film director with both iconic Australian narratives and many a Hollywood blockbuster under his ...
On-Surface Synthesis of Variable Bandgap Nanoporous Graphene
On-Surface Synthesis of Variable Bandgap Nanoporous Graphene
Tuning the bandgap of nanoporous graphene
is desirable for applications such as the charge transport layer in
organic-hybrid devices. The holy grail in the field is the ability t...
On‐Surface Synthesis of Variable Bandgap Nanoporous Graphene
On‐Surface Synthesis of Variable Bandgap Nanoporous Graphene
Abstract
Tuning the bandgap of nanoporous graphene is desirable for applications such as the charge transport layer in organic‐hybrid devices. The holy grail in t...
Exploring different carbon allotrope thermoplastic composites for electrochemical sensing
Exploring different carbon allotrope thermoplastic composites for electrochemical sensing
Composite electrodes provide an effective and cheap way to utilise a wide range of carbon materials to make electrodes. More recently thermoplastics have been widely used as the bi...

