Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

(Keynote) Chemical Selectivity and Micro/Nano Sensors

View through CrossRef
Nano and microsensors sensors, such as cantilevers, nanowires, inter-digital electrodes, etc., offer unprecedented sensitivity in chemical detection and remain as leading candidates for applications ranging from health-care to national security. They also have all the much desired sensor characteristics such as miniature size, low power consumption, simultaneous detection of multiple analytes, easy readout, and potential low cost. In general, molecular adsorption-induced changes in physical properties of the sensor serve as the sensor signal. However, many of these sensors suffer from lack of selectivity. Imparting chemical selectivity for reversible detection of small molecules has been a challenge. Commonly used method of using immobilized chemoselective coatings often results in high false positives due to the generic nature of reversible chemical interactions. Therefore, developing concepts that can provide high selectivity without relying on immobilized chemical interfaces has been an active area of research. Although infrared spectroscopy techniques offer excellent selectivity, they do not have required sensitivity. However, concepts that can combine microfaricated sensors with infrared spectroscopy offer excellent selectivity as well as sensitivity. The sensitivity of detection in the nanomechanical spectroscopic technique depends on the thermal mass of the sensor. Therefore, lowering the thermal mass of the detector could result in superior sensitivity in chemical sensing. Since sensor platforms such as nanowires have very small thermal mass, they can be an ideal sensor for photothermal spectroscopy to achieve higher sensitivity and fast response times. However, producing bi-material effect on a nanowire to cause mechanical motion is challenging. In addition, monitoring nanomechanical motion induced by small changes in temperature of a nanostructure, for example nanoribbons and nanocantilevers, requires complex and bulky readout devices. Recently we have demonstrated a method of combining photothermal spectroscopy of physisorbed molecules on a semiconductor nanowire with its electrical resonance response for unprecedented selectivity and sensitivity. This technique, therefore, combines the selectivity of mid IR spectroscopy and sensitivity offered by electrical resonance phenomenon. Wide band gap materials such as bismuth ferrite (BiFeO3 or BFO) have high density of surface states in their band gap, which are filled up to the Fermi level. Due to the high surface-to-volume ratio of a BFO nanowire, its electrical properties are significantly influenced by the electrical nature of the surface states. Changing the temperature of the nanowire modulates the occupation of these surface states. Since the thermal mass of a nanowire is extremely small, absorption of very small quantities of heat can result in large changes in its temperature and changes the population of the surface states. Therefore, illuminating the nanowire with pulsed light can modulate the population-depopulation of these surface states depending on excitation and relaxation of molecular vibrations of the adsorbed molecules. A slight variation in temperature induces changes in the surface state population further changing the electrical properties of the nanowire, which in turn can be detected by monitoring the electrical resonance response of the nanowire. In this technique a nanowire behaves analogous to an electrical series RLC resonant circuit with effective inductance and a non-ideal capacitance, with a resonance frequency in the MHz regime. This result in a faster response time (tens of ). Unlike cantilever-based photothermal sensors, where higher thermal mass typically result in slow , this method offers response times that are 1000 times faster. Using this combined platform of electrical resonance of a BFO nanowire and mid IR photothermal effect, we have demonstrated selective and sensitive detection of phsyosrbed molecules such as TNT, RDX, PETN, etc. The sensitivity in detection is in femto gram level. Since the molecules are physisorbed on the nanowire, they can be easily desorbed making the technique reversible. IR excitation of the physisorbed molecules increases the temperature of the nanowire due to its very low thermal mass. The presence of high density of surface states on the nanowire promotes thermally induced changes in population-depopulation of surface states. Changes in population of surface states changes the electrical resonance parameters of the nanowire and its electrical resonance frequency. The BFO nanowire/IR system utilizes IR-induced internal dissipation caused by IR absorption by the adsorbed molecules. This technique can be used for detecting minute amounts of surface adsorbed molecules on similar nanomechanical resonating platforms using dissipation as the parameter. The sensitivity can be further enhanced by optimization and can provide exciting opportunities in developing a sensitive platform with superior selectivity performance. Efforts are presently underway to develop miniature IR sources to decrease the overall footprint of the integrated system.
Title: (Keynote) Chemical Selectivity and Micro/Nano Sensors
Description:
Nano and microsensors sensors, such as cantilevers, nanowires, inter-digital electrodes, etc.
, offer unprecedented sensitivity in chemical detection and remain as leading candidates for applications ranging from health-care to national security.
They also have all the much desired sensor characteristics such as miniature size, low power consumption, simultaneous detection of multiple analytes, easy readout, and potential low cost.
In general, molecular adsorption-induced changes in physical properties of the sensor serve as the sensor signal.
However, many of these sensors suffer from lack of selectivity.
Imparting chemical selectivity for reversible detection of small molecules has been a challenge.
Commonly used method of using immobilized chemoselective coatings often results in high false positives due to the generic nature of reversible chemical interactions.
Therefore, developing concepts that can provide high selectivity without relying on immobilized chemical interfaces has been an active area of research.
Although infrared spectroscopy techniques offer excellent selectivity, they do not have required sensitivity.
However, concepts that can combine microfaricated sensors with infrared spectroscopy offer excellent selectivity as well as sensitivity.
The sensitivity of detection in the nanomechanical spectroscopic technique depends on the thermal mass of the sensor.
Therefore, lowering the thermal mass of the detector could result in superior sensitivity in chemical sensing.
Since sensor platforms such as nanowires have very small thermal mass, they can be an ideal sensor for photothermal spectroscopy to achieve higher sensitivity and fast response times.
However, producing bi-material effect on a nanowire to cause mechanical motion is challenging.
In addition, monitoring nanomechanical motion induced by small changes in temperature of a nanostructure, for example nanoribbons and nanocantilevers, requires complex and bulky readout devices.
Recently we have demonstrated a method of combining photothermal spectroscopy of physisorbed molecules on a semiconductor nanowire with its electrical resonance response for unprecedented selectivity and sensitivity.
This technique, therefore, combines the selectivity of mid IR spectroscopy and sensitivity offered by electrical resonance phenomenon.
Wide band gap materials such as bismuth ferrite (BiFeO3 or BFO) have high density of surface states in their band gap, which are filled up to the Fermi level.
Due to the high surface-to-volume ratio of a BFO nanowire, its electrical properties are significantly influenced by the electrical nature of the surface states.
Changing the temperature of the nanowire modulates the occupation of these surface states.
Since the thermal mass of a nanowire is extremely small, absorption of very small quantities of heat can result in large changes in its temperature and changes the population of the surface states.
Therefore, illuminating the nanowire with pulsed light can modulate the population-depopulation of these surface states depending on excitation and relaxation of molecular vibrations of the adsorbed molecules.
A slight variation in temperature induces changes in the surface state population further changing the electrical properties of the nanowire, which in turn can be detected by monitoring the electrical resonance response of the nanowire.
In this technique a nanowire behaves analogous to an electrical series RLC resonant circuit with effective inductance and a non-ideal capacitance, with a resonance frequency in the MHz regime.
This result in a faster response time (tens of ).
Unlike cantilever-based photothermal sensors, where higher thermal mass typically result in slow , this method offers response times that are 1000 times faster.
Using this combined platform of electrical resonance of a BFO nanowire and mid IR photothermal effect, we have demonstrated selective and sensitive detection of phsyosrbed molecules such as TNT, RDX, PETN, etc.
The sensitivity in detection is in femto gram level.
Since the molecules are physisorbed on the nanowire, they can be easily desorbed making the technique reversible.
IR excitation of the physisorbed molecules increases the temperature of the nanowire due to its very low thermal mass.
The presence of high density of surface states on the nanowire promotes thermally induced changes in population-depopulation of surface states.
Changes in population of surface states changes the electrical resonance parameters of the nanowire and its electrical resonance frequency.
The BFO nanowire/IR system utilizes IR-induced internal dissipation caused by IR absorption by the adsorbed molecules.
This technique can be used for detecting minute amounts of surface adsorbed molecules on similar nanomechanical resonating platforms using dissipation as the parameter.
The sensitivity can be further enhanced by optimization and can provide exciting opportunities in developing a sensitive platform with superior selectivity performance.
Efforts are presently underway to develop miniature IR sources to decrease the overall footprint of the integrated system.

Related Results

Contribution to the system architecture design for electromagnetic nano-network communications
Contribution to the system architecture design for electromagnetic nano-network communications
(English) A nano-network is a communication network at the nano-scale between nano-devices. Nanodevices face certain challenges in functionalities, because of limitations in their ...
The Hybrid Breeding of Nanomedia
The Hybrid Breeding of Nanomedia
IntroductionIf human beings have become a geophysical force, capable of impacting the very crust and atmosphere of the planet, and if geophysical forces become objects of study, pr...
Effect of Foliar Application of Nano fertilizers on Soil Properties of Rice (Oryza sativa L.) Under Western UP, India
Effect of Foliar Application of Nano fertilizers on Soil Properties of Rice (Oryza sativa L.) Under Western UP, India
An experiment was conducted during kharif 2022 and 2023 at the Sardar Vallabhbhai Patel University of Agriculture and Technology, Meerut, Uttar Pradesh, to study the Effect of Foli...
The influence of micro influencers and digital marketing on product purchasing decisions at tiktok shop in bengkulu city
The influence of micro influencers and digital marketing on product purchasing decisions at tiktok shop in bengkulu city
THE INFLUENCE OF MICRO-INFLUENCERS AND DIGITAL MARKETING ON PURCHASE DECISIONS OF TIKTOK SHOP CUSTOMERS IN BENGKULU CITY Andhes Tiani Putri, Meylaty F   12Faculty Of Economic E...
KARAKTERISASI TEBAL LAPISAN BATAS FLUIDA NANO ZrO2 DI PERMUKAAN PEMANAS PADA PROSES KONVEKSI ALAMIAH
KARAKTERISASI TEBAL LAPISAN BATAS FLUIDA NANO ZrO2 DI PERMUKAAN PEMANAS PADA PROSES KONVEKSI ALAMIAH
ABSTRAK KARAKTERISASI Tebal Lapisan Batas Fluida Nano ZrO2 di permukaan pemanas pada Proses Konveksi Alamiah. Pendinginan sistem sangat dipengaruhi oleh proses perpindahan panas ko...
EFFECT OF MGO NANO-PARTICLES ON THE GROWTH AND YIELD OF SOYBEAN (Glycine Max (L.) MERR
EFFECT OF MGO NANO-PARTICLES ON THE GROWTH AND YIELD OF SOYBEAN (Glycine Max (L.) MERR
This study examined the effects of magnesium oxide nanoparticles (MgO-NPs) on soybean (Glycine max) growth and yield using a randomized design with five replicates. Treatments incl...
Effect of foliar application of nano-NPK and nano-micro elements on the growth, flowering, and biochemical composition of Zinnia elegans
Effect of foliar application of nano-NPK and nano-micro elements on the growth, flowering, and biochemical composition of Zinnia elegans
Zinnia elegans, a widely utilized flowering plant for pots, cut flowers, bouquets, and gardens, necessitates macro- and micro-nutrients for optimal growth, development, and floweri...

Back to Top