Javascript must be enabled to continue!
Enhanced Oil Recovery Mechanism and Technical Boundary of Gel Foam Profile Control System for Heterogeneous Reservoirs in Changqing
View through CrossRef
The gel plugging and flooding system has a long history of being researched and applied, but the Changqing reservoir geological characteristics are complex, and the synergistic performance of the composite gel foam plugging system is not fully understood, resulting in poor field application. Additionally, the technique boundary chart of the heterogeneous reservoir plugging system has hardly appeared. In this work, reservoir models of porous, fracture, and pore-fracture were constructed, a composite gel foam plugging system was developed, and its static injection and dynamic profile control and oil displacement performance were evaluated. Finally, combined with the experimental studies, a technical boundary chart of plugging systems for heterogeneous reservoirs is proposed. The research results show that the adsorption effect of microspheres (WQ-100) on the surface of elastic gel particles-1 (PEG-1) is more potent than that of pre-crosslinked particle gel (PPG) and the deposition is mainly on the surface of PPG. The adsorption effect of PEG-1 on the surface of PPG is not apparent, primarily manifested as deposition stacking. The gel was synthesized with 0.2% hydrolyzed polyacrylamide (HPAM) + 0.2% organic chromium cross-linking agent, and the strength of enhanced gel with WQ-100 was higher than that of PEG-1 and PPG. The comprehensive value of WQ-100 reinforced foam is greater than that of PEG-1, and PPG reinforced foam, and the enhanced foam with gel has a thick liquid film and poor foaming effect. For the heterogeneous porous reservoir with the permeability of 5/100 mD, the enhanced foam with WQ-100 shows better performance in plugging control and flooding, and the recovery factor increases by 28.05%. The improved foam with gel enhances the fluid flow diversion ability and the recovery factor of fractured reservoirs with fracture widths of 50 μm and 180 μm increases by 29.41% and 24.39%, respectively. For pore-fractured reservoirs with a permeability of 52/167 mD, the PEG + WQ-100 microsphere and enhanced foam with WQ-100 systems show better plugging and recovering performance, and the recovery factor increases are 20.52% and 17.08%, 24.44%, and 21.43%, respectively. The smaller the particle size of the prefabricated gel, the more uniform the adsorption on the foam liquid film and the stronger the stability of the foam system. The plugging performance of the composite gel system is stronger than that of the enhanced gel with foam, but the oil displacement performance of the gel-enhanced foam is better than that of the composite gel system due to the “plug-flooding-integrated” feature of the foam. Combined with the plugging and flooding performance of each plugging system, a technique boundary chart for the plugging system was established for the coexisting porous, fracture, and pore-fracture heterogeneous reservoirs in Changqing Oilfield.
Title: Enhanced Oil Recovery Mechanism and Technical Boundary of Gel Foam Profile Control System for Heterogeneous Reservoirs in Changqing
Description:
The gel plugging and flooding system has a long history of being researched and applied, but the Changqing reservoir geological characteristics are complex, and the synergistic performance of the composite gel foam plugging system is not fully understood, resulting in poor field application.
Additionally, the technique boundary chart of the heterogeneous reservoir plugging system has hardly appeared.
In this work, reservoir models of porous, fracture, and pore-fracture were constructed, a composite gel foam plugging system was developed, and its static injection and dynamic profile control and oil displacement performance were evaluated.
Finally, combined with the experimental studies, a technical boundary chart of plugging systems for heterogeneous reservoirs is proposed.
The research results show that the adsorption effect of microspheres (WQ-100) on the surface of elastic gel particles-1 (PEG-1) is more potent than that of pre-crosslinked particle gel (PPG) and the deposition is mainly on the surface of PPG.
The adsorption effect of PEG-1 on the surface of PPG is not apparent, primarily manifested as deposition stacking.
The gel was synthesized with 0.
2% hydrolyzed polyacrylamide (HPAM) + 0.
2% organic chromium cross-linking agent, and the strength of enhanced gel with WQ-100 was higher than that of PEG-1 and PPG.
The comprehensive value of WQ-100 reinforced foam is greater than that of PEG-1, and PPG reinforced foam, and the enhanced foam with gel has a thick liquid film and poor foaming effect.
For the heterogeneous porous reservoir with the permeability of 5/100 mD, the enhanced foam with WQ-100 shows better performance in plugging control and flooding, and the recovery factor increases by 28.
05%.
The improved foam with gel enhances the fluid flow diversion ability and the recovery factor of fractured reservoirs with fracture widths of 50 μm and 180 μm increases by 29.
41% and 24.
39%, respectively.
For pore-fractured reservoirs with a permeability of 52/167 mD, the PEG + WQ-100 microsphere and enhanced foam with WQ-100 systems show better plugging and recovering performance, and the recovery factor increases are 20.
52% and 17.
08%, 24.
44%, and 21.
43%, respectively.
The smaller the particle size of the prefabricated gel, the more uniform the adsorption on the foam liquid film and the stronger the stability of the foam system.
The plugging performance of the composite gel system is stronger than that of the enhanced gel with foam, but the oil displacement performance of the gel-enhanced foam is better than that of the composite gel system due to the “plug-flooding-integrated” feature of the foam.
Combined with the plugging and flooding performance of each plugging system, a technique boundary chart for the plugging system was established for the coexisting porous, fracture, and pore-fracture heterogeneous reservoirs in Changqing Oilfield.
Related Results
Foam Injection Test in the Siggins Field, Illinois
Foam Injection Test in the Siggins Field, Illinois
A pilot test in this tired, old field, confirmed the laboratory-derived conclusion that foam can do more than soften a beard or ruin a river. It can decrease the mobility of gas an...
Lab Evaluation of Long-Distance Propagation of CO2 Foam for Deep Mobility Control
Lab Evaluation of Long-Distance Propagation of CO2 Foam for Deep Mobility Control
Abstract
Long-distance foam propagation is crucial and necessary for deep mobility-control applications of foam in geological formations. The long-distance propag...
Pore Scale Visualization during Carbonate Heavy Oil Recovery: Surfactant Alternating CO2 Foam/Polymer Enhanced Foam Flooding
Pore Scale Visualization during Carbonate Heavy Oil Recovery: Surfactant Alternating CO2 Foam/Polymer Enhanced Foam Flooding
Abstract
Carbonate reservoirs hold significant reserves of heavy crude oil that can be recovered by non-thermal processes. Chemical, gas, water, and solvent injectio...
Enhance Foam Flooding Pilot Test in Chengdong Of Shengli Oilfield: Laboratory Experiment And Field Performance
Enhance Foam Flooding Pilot Test in Chengdong Of Shengli Oilfield: Laboratory Experiment And Field Performance
Abstract
As the second largest oilfield in China, Shengli oilfield has been one of the largest oil-bearing regions performing polymer flooding in the world. Howev...
Numerical Simulation of Foam Flooding For Sweep Improvement
Numerical Simulation of Foam Flooding For Sweep Improvement
Abstract
Foams are used for mobility control in Enhanced Oil Recovery operations involving injection of gases or steam. The ability of foams to lower the mobility...
Foam Flood in Yates Reservoir for Improving Oil Recovery
Foam Flood in Yates Reservoir for Improving Oil Recovery
Abstract
The Yates reservoir is a major, multibillion-barrel legacy oil reservoir in West Texas discovered in 1926. Oil production mainly comes from the San Andres f...
Stability Improvement of CO2 Foam for Enhanced Oil Recovery Applications Using Nanoparticles and Viscoelastic Surfactants
Stability Improvement of CO2 Foam for Enhanced Oil Recovery Applications Using Nanoparticles and Viscoelastic Surfactants
Abstract
CO2-enhanced oil recovery (EOR) was started in 1950. Low sweep efficiency and early breakthrough issues were associated with the CO2-EOR system. Foam-EOR wa...
Stabilized CO2 Foam for EOR Applications
Stabilized CO2 Foam for EOR Applications
Abstract
The practice of injecting CO2 for oil production was initiated in the 1950's. Today, CO2 flooding is an established technique to enhance oil recovery (...

