Search engine for discovering works of Art, research articles, and books related to Art and Culture
ShareThis
Javascript must be enabled to continue!

Impingement Heat Transfer on a Cylindrical, Concave Surface With Varying Jet Geometries

View through CrossRef
Jet impingement is often employed within the leading edge of turbine airfoils to combat the heat loads incurred within this region. This experimental investigation employs a transient liquid crystal technique to obtain detailed Nusselt number distributions on a concave, cylindrical surface that models the leading edge of a turbine airfoil. The effect of hole shape and differing hole inlet and exit conditions are investigated. Two hole shapes are studied: cylindrical and racetrack-shaped holes; for each hole shape, the hydraulic diameter and mass flow rate into the array of jets is conserved. As a result, the jet's Reynolds number varies between the two jet arrays. Reynolds numbers of 13,600, 27,200, and 40,700 are investigated for the cylindrical holes, and Reynolds numbers of 11,500, 23,000, and 34,600 are investigated for the racetrack holes. Three inlet and exit conditions are investigated for each hole shape: a square edged, a partially filleted, and a fully filleted hole. The ratio of the fillet radius to hole hydraulic diameter is set at 0.25 and 0.667 for the partially and fully filleted holes, respectively, while all other geometrical features remain constant. Results show the Nusselt number is directly related to the Reynolds number for both cylindrical and racetrack-shaped holes. The racetrack holes are shown to provide enhanced heat transfer compared to the cylindrical holes. The degree of filleting at the inlet and outlet of the holes affects whether the heat transfer on the leading edge model is further enhanced or degraded.
Title: Impingement Heat Transfer on a Cylindrical, Concave Surface With Varying Jet Geometries
Description:
Jet impingement is often employed within the leading edge of turbine airfoils to combat the heat loads incurred within this region.
This experimental investigation employs a transient liquid crystal technique to obtain detailed Nusselt number distributions on a concave, cylindrical surface that models the leading edge of a turbine airfoil.
The effect of hole shape and differing hole inlet and exit conditions are investigated.
Two hole shapes are studied: cylindrical and racetrack-shaped holes; for each hole shape, the hydraulic diameter and mass flow rate into the array of jets is conserved.
As a result, the jet's Reynolds number varies between the two jet arrays.
Reynolds numbers of 13,600, 27,200, and 40,700 are investigated for the cylindrical holes, and Reynolds numbers of 11,500, 23,000, and 34,600 are investigated for the racetrack holes.
Three inlet and exit conditions are investigated for each hole shape: a square edged, a partially filleted, and a fully filleted hole.
The ratio of the fillet radius to hole hydraulic diameter is set at 0.
25 and 0.
667 for the partially and fully filleted holes, respectively, while all other geometrical features remain constant.
Results show the Nusselt number is directly related to the Reynolds number for both cylindrical and racetrack-shaped holes.
The racetrack holes are shown to provide enhanced heat transfer compared to the cylindrical holes.
The degree of filleting at the inlet and outlet of the holes affects whether the heat transfer on the leading edge model is further enhanced or degraded.

Related Results

CHT/CFD Predictions of Impingement Cooling With Four Sided Flow Exit
CHT/CFD Predictions of Impingement Cooling With Four Sided Flow Exit
Impingement/effusion cooling has no cross-flow in the impingement gap if all the coolant flow through the impingement wall passes through the effusion wall. In this investigation, ...
Impingement/Effusion Cooling Wall Heat Transfer: Reduced Number of Impingement Jet Holes Relative to the Effusion Holes
Impingement/Effusion Cooling Wall Heat Transfer: Reduced Number of Impingement Jet Holes Relative to the Effusion Holes
Internal wall heat transfer for impingement/effusion cooling was measured and predicted using conjugate heat transfer (CHT) computational fluid dynamics (CFD). The work was only co...
Conjugate Heat Transfer CFD Predictions of Impingement Jet Array Flat Wall Cooling Aerodynamics With Single Sided Flow Exit
Conjugate Heat Transfer CFD Predictions of Impingement Jet Array Flat Wall Cooling Aerodynamics With Single Sided Flow Exit
Conjugate heat transfer CFD studies were undertaken on impingement square jet arrays with self induced crossflow in the impingement gap with a single sided exit. The aim was to und...
Leading Edge Impingement With Racetrack Shaped Jets and Varying Inlet Supply Conditions
Leading Edge Impingement With Racetrack Shaped Jets and Varying Inlet Supply Conditions
Impinging jets are often employed within the leading edge of turbine blades and vanes to combat the tremendous heat loads incurred as the hot exhaust gases stagnate along the exter...
Numerical Investigation of an Integrated Impingement and Pin-Fin Cooling Configuration in a Wedge Duct
Numerical Investigation of an Integrated Impingement and Pin-Fin Cooling Configuration in a Wedge Duct
In the gas turbine blade cooling design, impingement insert and pin-fins arranged as an array in the trailing region are usually used to enhance the heat transfer. To investigate t...
Impingement/Effusion Cooling Wall Heat Transfer: Conjugate Heat Transfer Computational Fluid Dynamic Predictions
Impingement/Effusion Cooling Wall Heat Transfer: Conjugate Heat Transfer Computational Fluid Dynamic Predictions
Impingement/effusion internal wall heat transfer was investigated using conjugate heat transfer (CHT) computational fluid dynamics (CFD). ANSYS Fluent was used with the k-ε turbule...

Back to Top