Dynamic Analysis of a Permanent Magnet DC Motor Using a Buck Converter Controlled by ZAD-FPIC

This paper presents the dynamic analysis of a permanent magnet DC motor using a buck converter controlled by zero average dynamics (ZADs) and fixed-point inducting control (FPIC). Initially, the steady-state behavior of the closed-loop system was observed and then transient behavior analyzed while maintaining a fixed ZAD control parameter and changing the FPIC parameter. Other behaviors were studied when the value of the ZAD control parameter changed and the FPIC parameter was maintained at the initial value. Besides, bifurcation diagrams were built with one and two delay periods by changing the control parameter of the FPIC and maintaining fixed ZAD parameters while some disturbances were carried out in the electric source. The results show that the ZAD-FPIC controller allowed good regulation of the speed for different reference values. The ZAD-FPIC control technique is effective for controlling the buck converter with the motor, even with two delay periods. The robustness of the system was checked by changing the voltage of the source. It was shown that the system used a fixed switching frequency because the duty cycle was not saturated for certain ranges of the control parameters shown in the research. This technique can be used for higher order systems with experimental phenomena such as quantization effects, time delays, and variations in the input signal.