Javascript must be enabled to continue!
Seed Polymer Coating with ZnO, SiO2 and TiO2 Nanoparticles: An Innovative Seed Quality Enhancement Technique in Sweet Pepper
View through CrossRef
A laboratory study was undertaken to assess the effect of seed polymer coating with ZnO, SiO2 and TiO2 nanoparticles (NPs) at different concentrations (250 and 500 ppm) on different seeds of vigour lots in sweet pepper at Department of Seed Science and Technology, University of Agricultural Sciences, Bangalore. Among vigour level, high vigour seed lots differed significantly with highest seed germination (84.0%), speed of germination (9.54), mean seedling length (11.53 cm), mean seedling dry weight (4.07 mg), seedling vigour index – I (952), seedling vigour index – II (342), total dehydrogenase activity (1.654), total soluble seed protein (68.24 µg/g), amylase activity (85.47 µmol/min) and decreased electrical conductivity of seed leachates (35.91 µS/cm).Among treatments, seed polymer coating with ZnO NPs at 250 ppm recorded significantly higher seed germination (82.0%), speed of germination (9.22), mean seedling length (11.41 cm), mean seedling dry weight ( 4.24 mg), seedling vigour index – I (937)seedling vigour index - II (348), total dehydrogenase activity (1.506), protein content (72.80 µg/g) and á-amylase activity (76.30 µmol/min) and lowest electrical conductivity (30.64 µS/cm) over control, followed by SiO2 and TiO2 NPs at 250 ppm. However, higher concentrations of NPs reflected inhibitory effect on seed germination and seedling growth (nano ZnO, SiO2 and TiO2 at 500 ppm each).Based on the seed quality evaluation, it was concluded that seed coating with ZnO NPs at 250 ppm can be used to enhance of sweet pepper.
Indian Council of Agricultural Research, Directorate of Knowledge Management in Agriculture
Title: Seed Polymer Coating with ZnO, SiO2 and TiO2 Nanoparticles: An Innovative Seed Quality Enhancement Technique in Sweet Pepper
Description:
A laboratory study was undertaken to assess the effect of seed polymer coating with ZnO, SiO2 and TiO2 nanoparticles (NPs) at different concentrations (250 and 500 ppm) on different seeds of vigour lots in sweet pepper at Department of Seed Science and Technology, University of Agricultural Sciences, Bangalore.
Among vigour level, high vigour seed lots differed significantly with highest seed germination (84.
0%), speed of germination (9.
54), mean seedling length (11.
53 cm), mean seedling dry weight (4.
07 mg), seedling vigour index – I (952), seedling vigour index – II (342), total dehydrogenase activity (1.
654), total soluble seed protein (68.
24 µg/g), amylase activity (85.
47 µmol/min) and decreased electrical conductivity of seed leachates (35.
91 µS/cm).
Among treatments, seed polymer coating with ZnO NPs at 250 ppm recorded significantly higher seed germination (82.
0%), speed of germination (9.
22), mean seedling length (11.
41 cm), mean seedling dry weight ( 4.
24 mg), seedling vigour index – I (937)seedling vigour index - II (348), total dehydrogenase activity (1.
506), protein content (72.
80 µg/g) and á-amylase activity (76.
30 µmol/min) and lowest electrical conductivity (30.
64 µS/cm) over control, followed by SiO2 and TiO2 NPs at 250 ppm.
However, higher concentrations of NPs reflected inhibitory effect on seed germination and seedling growth (nano ZnO, SiO2 and TiO2 at 500 ppm each).
Based on the seed quality evaluation, it was concluded that seed coating with ZnO NPs at 250 ppm can be used to enhance of sweet pepper.
Related Results
TiO2-based heterostructure photocatalysts for enhanced hydrogen production
TiO2-based heterostructure photocatalysts for enhanced hydrogen production
The photocatalytic production of hydrogen from water and biomass derivatives such as ethanol, glycerol and sugars is a highly attractive strategy to generate environmentally benign...
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
Photocatalytic Syntheis of L-Pipecolinic Acid from L-Lysine by Hollow Core-Shell Titania Particles
A possible approach for photocatalytic selective organic synthesis is utilization of photocatalysts of or in defined microstructures. We have reported [1,2] fabrication of a novel...
Use of nanoparticles for energy and sensing applications
Use of nanoparticles for energy and sensing applications
(English) In this work, different nano, sub-micron, and microparticle materials have been embedded in various types of electrolytes, including ionic liquid gel polymer electrolytes...
The Effect of Cayyey Chill Formulation (Capsicum frutescens Linn) Against Cuko Pempek
The Effect of Cayyey Chill Formulation (Capsicum frutescens Linn) Against Cuko Pempek
Cuko is the main complement when eating pempek which comes from the city of Palembang, South Sumatra Province, which is made from cayenne pepper, garlic, tamarind, palm sugar and s...
Influence of Al, Ta Doped ZnO Seed Layer on the Structure, Morphology and Optical Properties of ZnO Nanorods
Influence of Al, Ta Doped ZnO Seed Layer on the Structure, Morphology and Optical Properties of ZnO Nanorods
Background:Zinc oxide (ZnO) is one of the most attractive II-VI semiconductor oxide material, because of its direct wide band gap (3.37 eV) and large binding energy (60 meV). Zinc ...
Study on fabrication of ZnO@TiO2 nanocomposite for perozone degradation of amoxicillin from aqueous solution
Study on fabrication of ZnO@TiO2 nanocomposite for perozone degradation of amoxicillin from aqueous solution
In this study, a simple method for fabrication of a ZnO@TiO2 nanocomposite was developed to degrade amoxicillin (AMX) from aqueous solution by heterogeneous ...
Modeling hydrogen-capture with SnO2–SiO2-based materials doped by alkali metal
Modeling hydrogen-capture with SnO2–SiO2-based materials doped by alkali metal
A vast study on H-capture by LiRb (SnO2-SiO2), LiCs(SnO2-SiO2), NaRb(SnO2-SiO2), NaCs(SnO2-SiO2), KRb(SnO2-SiO2), KCs(SnO2-SiO2), was carried out including using DFT computations a...
Preparation and characterization of nanocomposites based on polylactide manufactured by reactive extrusion-calendering : thermal, rheological, mechanical and fracture properties
Preparation and characterization of nanocomposites based on polylactide manufactured by reactive extrusion-calendering : thermal, rheological, mechanical and fracture properties
PLA nanocomposites sheets that is rnodified with multi-functional epoxide reactive agent (Joncryi4300F, BASF, Germany) were manufacturad using reactive extrusion in a pilot plant. ...

