Javascript must be enabled to continue!
Underwater acoustic energy harvesting using an ePTFE waterproof acoustic-permeable membrane and helmholtz piezoelectric resonator
View through CrossRef
Abstract
Underwater wireless power supply is crucial for the long-term operation of distributed sensors and Internet of Underwater Things (IoUT) nodes, yet practical implementation is hindered by severe acoustic impedance mismatch at water–structure interfaces and low energy conversion efficiency. In this work, a waterproof underwater acoustic energy harvester integrating a porous expanded polytetrafluoroethylene (ePTFE) acoustic membrane, a Helmholtz resonant cavity, and a bimorph piezoelectric cantilever array is proposed. The ePTFE membrane acts as a waterproof acoustic coupling layer, whose hydrophobic surface and microporous structure prevent water infiltration and, by adjusting the porosity, can tune the acoustic impedance, thereby reducing interfacial reflection and efficiently transmitting acoustic energy into the air-filled cavity. The Helmholtz cavity amplifies local acoustic pressure near the piezoelectric array, enhancing electromechanical conversion. Finite element simulations and laboratory water-tank experiments show that the 10 cm cavity with a 25 μm ePTFE membrane produces a peak open-circuit voltage of 7.8 V at 4.8 kHz and 1 m, a local field-enhancement location in the present tank. Under the same condition, a 6800 μF capacitor is charged to 3.96 V in 34.1 s (53.2 mJ; 1.56 mW average storage power), and the stored energy drives 50 LEDs. These absolute values are tank-conditioned, not free-field metrics, and demonstrate intermittent micro-power supply in a confined underwater field. This work provides a feasible design strategy for non-contact underwater acoustic energy harvesting with enhanced output performance, enabling long-term operation of low-power IoUT nodes.
Title: Underwater acoustic energy harvesting using an ePTFE waterproof acoustic-permeable membrane and helmholtz piezoelectric resonator
Description:
Abstract
Underwater wireless power supply is crucial for the long-term operation of distributed sensors and Internet of Underwater Things (IoUT) nodes, yet practical implementation is hindered by severe acoustic impedance mismatch at water–structure interfaces and low energy conversion efficiency.
In this work, a waterproof underwater acoustic energy harvester integrating a porous expanded polytetrafluoroethylene (ePTFE) acoustic membrane, a Helmholtz resonant cavity, and a bimorph piezoelectric cantilever array is proposed.
The ePTFE membrane acts as a waterproof acoustic coupling layer, whose hydrophobic surface and microporous structure prevent water infiltration and, by adjusting the porosity, can tune the acoustic impedance, thereby reducing interfacial reflection and efficiently transmitting acoustic energy into the air-filled cavity.
The Helmholtz cavity amplifies local acoustic pressure near the piezoelectric array, enhancing electromechanical conversion.
Finite element simulations and laboratory water-tank experiments show that the 10 cm cavity with a 25 μm ePTFE membrane produces a peak open-circuit voltage of 7.
8 V at 4.
8 kHz and 1 m, a local field-enhancement location in the present tank.
Under the same condition, a 6800 μF capacitor is charged to 3.
96 V in 34.
1 s (53.
2 mJ; 1.
56 mW average storage power), and the stored energy drives 50 LEDs.
These absolute values are tank-conditioned, not free-field metrics, and demonstrate intermittent micro-power supply in a confined underwater field.
This work provides a feasible design strategy for non-contact underwater acoustic energy harvesting with enhanced output performance, enabling long-term operation of low-power IoUT nodes.
Related Results
Acoustic characteristics of underwater cylindrical Helmholtz resonator
Acoustic characteristics of underwater cylindrical Helmholtz resonator
The acoustic characteristics of underwater cylindrical Helmholtz resonator are analyzed theoretically. Based on the theories of electro-acoustic analogy, a low frequency lumped-par...
Procedure for Western blot v1
Procedure for Western blot v1
Goal: This document has the objective of standardizing the protocol for Western blot. This technique allows the detection of specific proteins separated on polyacrylamide gel and t...
Mechanical properties of polymeric biomaterials: Modified ePTFE using gamma irradiation
Mechanical properties of polymeric biomaterials: Modified ePTFE using gamma irradiation
Abstract
Evaluating the mechanical properties of expanded polytetrafluoroethylene (ePTFE) is essential to measure its resistance to permanent deformation from an app...
The Effect of Piezoelectric Shape on Energy Harvesting Shoes
The Effect of Piezoelectric Shape on Energy Harvesting Shoes
Piezoelectric elements are commonly installed in shoe sole to make use of the piezoelectric effect due to the vibration generated by the human motion. Piezoelectric shoe is a great...
An Investigation into Hydrophobic Membrane Fouling in Desalination Using Membrane Distillation Technology
An Investigation into Hydrophobic Membrane Fouling in Desalination Using Membrane Distillation Technology
Demand for freshwater supplies is continuously increasing globally to the extent where some parts of the world became highly water stressed. In particular, the Arabian Gulf states ...
A Constitutive Model for Piezoelectric Paint with Mixed Connectivity
A Constitutive Model for Piezoelectric Paint with Mixed Connectivity
This article presents a constitutive model for piezoelectric paint that addresses its special characteristics such as mixed connectivity and air void content. Piezoelectric paint i...
Design and test of liquid sloshing piezoelectric energy harvester
Design and test of liquid sloshing piezoelectric energy harvester
The energy harvester based on the piezoelectric effect can convert the vibration energy in the environment into electricity to power the network nodes. In order to broaden the effe...
Piezoelectric ceramic materials on transducer technology for energy harvesting: A review
Piezoelectric ceramic materials on transducer technology for energy harvesting: A review
Recently, energy harvesting through the means of piezoelectric transducer technology has increasingly attracted the attention of engineers and scientists in producing/generating el...

