Javascript must be enabled to continue!
Poly(lactic acid)-based Composites Incorporated with Spent Coffee Ground and Tea Leave for Food Packaging Application: A Waste to Wealth
View through CrossRef
Abstract
Polymer composites of polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT) incorporated with spent coffee grounds (SCG) and tea leave (TL) were prepared by two-roll mill mixer. 4,4-methylene diphenyl diisocyanate (MDI), toluene 2,4-diisocyanate (TDI), and bis[3-(triethoxysilyl) propyl] tetrasulfide (TESPT) were used as coupling agents. The influences of coupling agent types, coupling agent content, and weight ratios of polymer to filler on the mechanical properties, melt flow index, and overall migration (OM) of the composites were studied. The results showed that MDI and TDI had better performance compared to TESPT for both tensile and elongation at break. The tensile strength and elongation at break of PLA+PBAT/SCG composites with weight ratio of polymer to filler = 70/30 increased from 19.6 MPa to ∼23.0 to 25.0 MPa, and 6.6 to ∼10.0%, respectively when using these coupling agents (MDI and TDI) of 3 g/100 g polymers. Moreover, the addition of MDI and TDI greatly increased the viscosity of the melted composites (4-fold), while TESPT made the viscosity decrease. However, the mechanical properties of the composites decreased drastically with increasing SCG proportion. Compared to PLA+PBAT/SCG, interfacial adhesion of PLA+PBAT/TL was higher confirming by tensile strength and SEM images. However, there was no significant difference between PLA+PBAT/TL and PLA+PBAT/SCG composites in terms of elongation at break, impact strength and melt flow index. The OM of PLA+PBAT/SCG and PLA+PBAT/TL composites with coupling agents were in the range of ∼0.03–0.28 mg/dm
2
when using 3% acetic acid and 10% ethanol as food simulants, which not excess the migration limit (10 mg/dm
2
) according to Food Contact Materials EU No. 10/2011 legislation. It means that they might be safe for use as food contact materials for packaging and containers.
Title: Poly(lactic acid)-based Composites Incorporated with Spent Coffee Ground and Tea Leave for Food Packaging Application: A Waste to Wealth
Description:
Abstract
Polymer composites of polylactic acid (PLA) and polybutylene adipate terephthalate (PBAT) incorporated with spent coffee grounds (SCG) and tea leave (TL) were prepared by two-roll mill mixer.
4,4-methylene diphenyl diisocyanate (MDI), toluene 2,4-diisocyanate (TDI), and bis[3-(triethoxysilyl) propyl] tetrasulfide (TESPT) were used as coupling agents.
The influences of coupling agent types, coupling agent content, and weight ratios of polymer to filler on the mechanical properties, melt flow index, and overall migration (OM) of the composites were studied.
The results showed that MDI and TDI had better performance compared to TESPT for both tensile and elongation at break.
The tensile strength and elongation at break of PLA+PBAT/SCG composites with weight ratio of polymer to filler = 70/30 increased from 19.
6 MPa to ∼23.
0 to 25.
0 MPa, and 6.
6 to ∼10.
0%, respectively when using these coupling agents (MDI and TDI) of 3 g/100 g polymers.
Moreover, the addition of MDI and TDI greatly increased the viscosity of the melted composites (4-fold), while TESPT made the viscosity decrease.
However, the mechanical properties of the composites decreased drastically with increasing SCG proportion.
Compared to PLA+PBAT/SCG, interfacial adhesion of PLA+PBAT/TL was higher confirming by tensile strength and SEM images.
However, there was no significant difference between PLA+PBAT/TL and PLA+PBAT/SCG composites in terms of elongation at break, impact strength and melt flow index.
The OM of PLA+PBAT/SCG and PLA+PBAT/TL composites with coupling agents were in the range of ∼0.
03–0.
28 mg/dm
2
when using 3% acetic acid and 10% ethanol as food simulants, which not excess the migration limit (10 mg/dm
2
) according to Food Contact Materials EU No.
10/2011 legislation.
It means that they might be safe for use as food contact materials for packaging and containers.
Related Results
British Food Journal Volume 46 Issue 12 1944
British Food Journal Volume 46 Issue 12 1944
1. The Committee have received a request from the Tea and Coffee Division for advice as to appropriate standards for liquid “coffee essences” including coffee and chicory essences,...
Indian Tea Industry Since the 1990's
Indian Tea Industry Since the 1990's
Tea is made from the young leaves and leaf buds of the tea bush Camellia sinensis. Ancient Chinese and Japanese legends refer to a beverage made from an infusion of dried tea leave...
Strategies Managing Smart Packaging For Food Application
Strategies Managing Smart Packaging For Food Application
Abstract Background: Traditional packaging will be shifting to innovative packaging due to significantly growing to new trend following increasing consumers awareness correlated wi...
Production of Lactic Acid Using a Co-culture of Lactobacillus paracasei and Levilactobacillus brevis
Production of Lactic Acid Using a Co-culture of Lactobacillus paracasei and Levilactobacillus brevis
Lactic acid bacteria (LAB) are the most important bacteria in desirable food fermentations, being responsible for the fermentation of sourdough bread, fermented foods and beverages...
Mediating Effect of Tea Perception on the Relationship between Tea Amenity and Tea Life Satisfaction: A Study of University Students in Gimhae
Mediating Effect of Tea Perception on the Relationship between Tea Amenity and Tea Life Satisfaction: A Study of University Students in Gimhae
This study empirically investigated the effects of tea amenity—reflecting the environmental, cultural, social, and value characteristics of tea—and tea perception on tea life satis...
Experimental Evaluation of Lactic Acid for Matrix Acidizing of Carbonates
Experimental Evaluation of Lactic Acid for Matrix Acidizing of Carbonates
Summary
To improve the efficiency of standard hydrochloric acid (HCl) stimulation treatments, many alternative acid systems have been developed to mitigate corrosion...
INNOVATION FOR MANUFACTURING FERTILIZER FROM COFFEE LEATHER WASTE FOR THE COMMUNITY AND FARMER GROUP IN BONDOWOSO
INNOVATION FOR MANUFACTURING FERTILIZER FROM COFFEE LEATHER WASTE FOR THE COMMUNITY AND FARMER GROUP IN BONDOWOSO
The coffee husk waste has not been utilized optimally by farmers. Coffee skin waste, which has been considered as a leftover material from the production of ground coffee, turns ou...
Sosiologi Dyah Ayu Kusumastuti 30422030
Sosiologi Dyah Ayu Kusumastuti 30422030
This research will discuss the process of making coffee that has been made by Mrs. Siyah in Gondangan Hamlet, Tirtomulyo Village, planting District, Kendal Regency, Central Java, w...

